Standard Number |
Last version |
Description |
Status |
EN 10016-1 |
1994 |
Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
|
EN 10016-2 |
1995 |
Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod |
|
EN 10016-3 |
1995 |
Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod |
|
EN 10016-4 |
1995 |
Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications |
|
EN 10017 |
2004 |
Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
|
EN 10020 |
2000 |
Definition and classification of grades of steel |
|
EN 10021 |
2006 |
General technical delivery conditions for steel products |
|
EN 10024 |
1995 |
Hot rolled taper flange I sections - Tolerances on shape and dimensions |
|
EN 10025 |
1993 |
Hot rolled products of non-alloy structural steels; technical delivery conditions |
Replaced by EN 10025-1/2004; 10025-2/2004 |
EN 10025-1 |
2004 |
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
|
EN 10025-2 |
2004 |
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels |
|
EN 10025-3 |
2004 |
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
|
EN 10025-4 |
2004 |
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
|
EN 10025-5 |
2004 |
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
|
EN 10025-6 |
2004 |
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
|
EN 10028-1 |
2007 |
Flat products made of steels for pressure purposes - Part 1: General requirements |
|
EN 10028-2 |
2009 |
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
|
EN 10028-3 |
2009 |
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
|
EN 10028-4 |
2009 |
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
|
EN 10028-5 |
2009 |
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
|
EN 10028-6 |
2009 |
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
|
EN 10028-7 |
2007 |
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
|
EN 10029 |
1991 |
Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass |
|
EN 10031 |
2003 |
Semi-finished products for forging - Tolerances on dimensions shape and mass |
|
EN 10034 |
1993 |
Structural steel I and H sections - Tolerances on shape and dimensions |
|
EN 10048 |
1996 |
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
|
EN 10051 |
1997 |
Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
|
EN 10055 |
1995 |
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
|
EN 10056-1 |
1998 |
Structural steel equal and unequal leg angles - Part 1: Dimensions |
|
EN 10056-2 |
1993 |
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
|
EN 10058 |
2003 |
Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
EN 10059 |
2003 |
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
EN 10060 |
2003 |
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
EN 10061 |
2003 |
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
EN 10067 |
1996 |
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
|
EN 10080 |
2005 |
Steel for the reinforcement of concrete - Weldable reinforcing steel – General |
|
EN 10083-1 |
2006 |
Steels for quenching and tempering - Part 1: General technical delivery conditions |
|
EN 10083-2 |
2006 |
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
|
EN 10083-3 |
2006 |
Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels |
|
EN 10084 |
2008 |
Case hardening steels - Technical delivery conditions |
|
EN 10085 |
2001 |
Nitriding steels - Technical delivery conditions |
|
EN 10087 |
1998 |
Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
|
EN 10089 |
2002 |
Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
|
EN 10090 |
1998 |
Valve steels and alloys for internal combustion engines |
|
EN 10092-1 |
2003 |
Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions |
|
EN 10092-2 |
2003 |
Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions |
|
EN 10108 |
2004 |
Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
|
EN 10111 |
2008 |
Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
|
EN 10113-2 |
1993 |
Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels |
Replaced by EN 10025-1:2004; EN 10025-3:2004 |
EN 10113-3 |
1993 |
Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels |
Replaced by EN 10025-1:2004; EN 10025-4:2004 |
EN 10120 |
2008 |
Steel sheet and strip for welded gas cylinders |
|
EN 10130 |
2006 |
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
|
EN 10131 |
2006 |
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
|
EN 10132-1 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
|
EN 10132-2 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels |
|
EN 10132-3 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering |
|
EN 10132-4 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications |
|
EN 10137-2 |
1995 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
Replaced by EN 10025-1:2004; EN 10025-6:2004 |
EN 10137-3 |
1995 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels |
Withdrawn 2000 |
EN 10139 |
1997 |
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions |
|
EN 10140 |
2006 |
Cold rolled narrow steel strip - Tolerances on dimensions and shape |
|
EN 10149-1 |
1995 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions |
|
EN 10149-2 |
1995 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels |
|
EN 10149-3 |
1995 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels |
|
EN 10155 |
1993 |
Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions |
Replaced by EN 10025-5:2004 |
EN 10162 |
2003 |
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
|
EN 10163-1 |
2004 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements |
|
EN 10163-2 |
2004 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
|
EN 10163-3 |
2004 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
|
EN 10164 |
2004 |
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
|
EN 10168 |
2004 |
Steel products - Inspection documents - List of information and description |
|
EN 10207 |
2005 |
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
|
EN 10208-1 |
2009 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
|
EN 10208-2 |
2009 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
|
EN 10209 |
1996 |
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
|
EN 10210-1 |
2006 |
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
EN 10210-2 |
2006 |
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
|