ASTM Standard List: Ferro Alloys, Other Materials and Terms and Definitions


ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.

This article contains a list of standards that covers among other things:

  • Standards for numerous ferro-alloys
  • Other materials not classified by the standard categories available
  • Terms and definitions giving guidance on terminology used in testing methodology and other topical areas

For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.

Ferro Alloys, Other Materials, and Terms/Definitions


Description Status
A 99 2009 Ferromanganese  
A 100 2007 Ferrosilicon  
A 101 2004 Ferrochromium  
A 102 2004 Ferrovanadium  
A 132 2004 Ferromolybdenum  
A 144 2004 Ferrotungsten  
A 145   Low-Carbon Ferromolybdenum Withdrawn 1940
A 146 2004 Molybdenum Oxide Products  
A 323 2006 Ferroboron  
A 324 2008 Ferrotitanium  
A 482 2005 Ferrochrome-Silicon  
A 483 2004 Silicomanganese  
A 495   Calcium-Silicon Alloys  
A 550 2006 Ferrocolumbium  
A 701 2005 Ferromanganese-Silicon  
A 835/A 835M 2005 Sizes of Ferroalloys and Alloy Additives  
A 1025 2005 Ferroalloys, General Requirements  

Others Materials

Description Status
A 97   Tungsten Powder Withdrawn 1935
A 700 2005 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment  
A 702 2006 Steel Fence Posts and Assemblies, Hot Wrought  
A 732/A 732M 2009 Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures  
A 801 2004 Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)  
A 845 2000 Titanium Scrap for Use in Deoxidation and Alloying of Steel Withdrawn 2005
A 846 2000 Aluminum Scrap for Use in Deoxidation and Alloying of Steel Withdrawn 2005
A 901 2008 Amorphous Magnetic Core Alloys, Semi-Processed Types  
A 922 2005 Silicon Metal  
A 930 2003 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits  
B 603 2007 Drawn or rolled iron-chromium-aluminum alloys for electrical heating elements  
B 753 2007 Standard Specification for Thermostat Component Alloys  
F 1222 1994 Classification for Hardware for Wood Fencing  
F 761 1997 Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence  


Description Status
A 119 1933 Definitions of Terms Relating to Heat Treatment Metals Withdrawn 1942
A 208   Method of Test for Uniformity of Coating by the Preece Test (Copper Sulfate Dip) on Zinc or Steel Articles Replaced by A 239
A 509   Definition of Terms Relating to Steel Forgings Replaced by A 788/ A788M
A 644 2009 Standard Terminology Relating to Iron Castings  
A 712 2007 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys  
A 717/A 717M 2006 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens  
A 718 1975 Test Method for Surface Insulation Resistivity of Multi-Strip Specimens Withdrawn 1996
A 719/A 719M 2007 Standard Test Method for Lamination Factor of Magnetic Materials  
A 902 2009 Standard Terminology Relating to Metallic Coated Steel Products  
A 919 1993 Terminology Relating to Heat Treatment of Metals Replaced by A 941
A 941 2009 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys  
A 944 2005 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens  
A 956 2006 Standard Test Method for Leeb Hardness Testing of Steel Products  
A 971/A 971M 2005 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils  
A 991/A 991M 2008 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products  
A1061/A1061M 2009 Standard Test Methods for Testing Multi-Wire Steel Strand  

Pretražite bazu znanja

Unesite reč za pretragu:

Pretražite prema

Kompletan tekst
Ključne reči


Korišćenjem Total Materia baze, pronalaženje informacije o specifikaciji standarda za metale, trenutnom statusu standarda i materijalima njime definisanim je na samo klik od Vas.

Za samo nekoliko sekundi pronaći ćete podatke o odgovarajućem materijalu ili ekvivalentni materijal iz Total Materia Liste standarda.

Da biste počeli pretragu kliknite na dugme Lista standarda u liniji menija.

solution img

Jednostavnim odabirom institucije za standardizaciju (SDO) i/ili unosom broja standarda dobićete rezultat iz višejezične baze podataka, koja sadrži preko 30,000 standarda.

Na primer, možete pregledati sve ASTM standarde za metale odabirom ASTM iz padajućeg menija Zemlja/Standard.

solution img

Kao rezultat ćete dobiti listu od preko 3000 ASTM standarda o metalima. Informacije uključuju: opis standarda, najnoviju verziju, trenutni status (važeći, zamenjen itd.) i link ka materijalima definisanim ovim standardom.

solution img

Klikom na odgovarajući link možete videti listu materijala definisanih tim standardom.

solution img

Možete detaljno pregledati osobine i ekvivalentne materijale za svaki materijal sa liste.

solution img

Imate priliku da isprobate Total Materia bazu podataka. Pozivamo Vas da se pridružite zajednici od preko 150,000 registrovanih korisnika kroz Total Materia Besplatan demo.