Entre em Contato
Resolva seus desafios de materiais
Descubra como podemos ajudar.
ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.
This article contains a list of standards that covers among other things:
For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.
Ferro Alloys, Other Materials, and Terms/Definitions
| Standard Number | Last version | Description | Status |
| A 99 | 2009 | Ferromanganese | |
| A 100 | 2007 | Ferrosilicon | |
| A 101 | 2004 | Ferrochromium | |
| A 102 | 2004 | Ferrovanadium | |
| A 132 | 2004 | Ferromolybdenum | |
| A 144 | 2004 | Ferrotungsten | |
| A 145 | Low-Carbon Ferromolybdenum | Withdrawn 1940 | |
| A 146 | 2004 | Molybdenum Oxide Products | |
| A 323 | 2006 | Ferroboron | |
| A 324 | 2008 | Ferrotitanium | |
| A 482 | 2005 | Ferrochrome-Silicon | |
| A 483 | 2004 | Silicomanganese | |
| A 495 | Calcium-Silicon Alloys | ||
| A 550 | 2006 | Ferrocolumbium | |
| A 701 | 2005 | Ferromanganese-Silicon | |
| A 835/A 835M | 2005 | Sizes of Ferroalloys and Alloy Additives | |
| A 1025 | 2005 | Ferroalloys, General Requirements |
| Standard Number | Last version | Description | Status |
| A 97 | Tungsten Powder | Withdrawn 1935 | |
| A 700 | 2005 | Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment | |
| A 702 | 2006 | Steel Fence Posts and Assemblies, Hot Wrought | |
| A 732/A 732M | 2009 | Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures | |
| A 801 | 2004 | Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) | |
| A 845 | 2000 | Titanium Scrap for Use in Deoxidation and Alloying of Steel | Withdrawn 2005 |
| A 846 | 2000 | Aluminum Scrap for Use in Deoxidation and Alloying of Steel | Withdrawn 2005 |
| A 901 | 2008 | Amorphous Magnetic Core Alloys, Semi-Processed Types | |
| A 922 | 2005 | Silicon Metal | |
| A 930 | 2003 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | |
| B 603 | 2007 | Drawn or rolled iron-chromium-aluminum alloys for electrical heating elements | |
| B 753 | 2007 | Standard Specification for Thermostat Component Alloys | |
| F 1222 | 1994 | Classification for Hardware for Wood Fencing | |
| F 761 | 1997 | Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence |
| Standard Number | Last version | Description | Status |
| A 119 | 1933 | Definitions of Terms Relating to Heat Treatment Metals | Withdrawn 1942 |
| A 208 | Method of Test for Uniformity of Coating by the Preece Test (Copper Sulfate Dip) on Zinc or Steel Articles | Replaced by A 239 | |
| A 509 | Definition of Terms Relating to Steel Forgings | Replaced by A 788/ A788M | |
| A 644 | 2009 | Standard Terminology Relating to Iron Castings | |
| A 712 | 2007 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys | |
| A 717/A 717M | 2006 | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens | |
| A 718 | 1975 | Test Method for Surface Insulation Resistivity of Multi-Strip Specimens | Withdrawn 1996 |
| A 719/A 719M | 2007 | Standard Test Method for Lamination Factor of Magnetic Materials | |
| A 902 | 2009 | Standard Terminology Relating to Metallic Coated Steel Products | |
| A 919 | 1993 | Terminology Relating to Heat Treatment of Metals | Replaced by A 941 |
| A 941 | 2009 | Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
| A 944 | 2005 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens | |
| A 956 | 2006 | Standard Test Method for Leeb Hardness Testing of Steel Products | |
| A 971/A 971M | 2005 | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils | |
| A 991/A 991M | 2008 | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products | |
| A1061/A1061M | 2009 | Standard Test Methods for Testing Multi-Wire Steel Strand |
A Total Materia é a principal plataforma de informações sobre materiais, fornecendo as informações mais abrangentes sobre propriedades de materiais metálicos e não metálicos e outros registros de materiais.
Todas essas informações estão disponíveis na Total Materia Horizon, a mais moderna ferramenta de seleção e informações sobre materiais, que oferece acesso inigualável a mais de 540.000 materiais, bem como a dados de referência selecionados e atualizados.
O Total Materia Horizon inclui: