Contactez-nous
Résolvez vos défis en matière de matériaux
Découvrez comment nous pouvons vous aider
ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.
This article contains a list of standards that covers among other things:
For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.
Ferro Alloys, Other Materials, and Terms/Definitions
| Standard Number | Last version | Description | Status |
| A 99 | 2009 | Ferromanganese | |
| A 100 | 2007 | Ferrosilicon | |
| A 101 | 2004 | Ferrochromium | |
| A 102 | 2004 | Ferrovanadium | |
| A 132 | 2004 | Ferromolybdenum | |
| A 144 | 2004 | Ferrotungsten | |
| A 145 | Low-Carbon Ferromolybdenum | Withdrawn 1940 | |
| A 146 | 2004 | Molybdenum Oxide Products | |
| A 323 | 2006 | Ferroboron | |
| A 324 | 2008 | Ferrotitanium | |
| A 482 | 2005 | Ferrochrome-Silicon | |
| A 483 | 2004 | Silicomanganese | |
| A 495 | Calcium-Silicon Alloys | ||
| A 550 | 2006 | Ferrocolumbium | |
| A 701 | 2005 | Ferromanganese-Silicon | |
| A 835/A 835M | 2005 | Sizes of Ferroalloys and Alloy Additives | |
| A 1025 | 2005 | Ferroalloys, General Requirements |
| Standard Number | Last version | Description | Status |
| A 97 | Tungsten Powder | Withdrawn 1935 | |
| A 700 | 2005 | Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment | |
| A 702 | 2006 | Steel Fence Posts and Assemblies, Hot Wrought | |
| A 732/A 732M | 2009 | Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures | |
| A 801 | 2004 | Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) | |
| A 845 | 2000 | Titanium Scrap for Use in Deoxidation and Alloying of Steel | Withdrawn 2005 |
| A 846 | 2000 | Aluminum Scrap for Use in Deoxidation and Alloying of Steel | Withdrawn 2005 |
| A 901 | 2008 | Amorphous Magnetic Core Alloys, Semi-Processed Types | |
| A 922 | 2005 | Silicon Metal | |
| A 930 | 2003 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | |
| B 603 | 2007 | Drawn or rolled iron-chromium-aluminum alloys for electrical heating elements | |
| B 753 | 2007 | Standard Specification for Thermostat Component Alloys | |
| F 1222 | 1994 | Classification for Hardware for Wood Fencing | |
| F 761 | 1997 | Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence |
| Standard Number | Last version | Description | Status |
| A 119 | 1933 | Definitions of Terms Relating to Heat Treatment Metals | Withdrawn 1942 |
| A 208 | Method of Test for Uniformity of Coating by the Preece Test (Copper Sulfate Dip) on Zinc or Steel Articles | Replaced by A 239 | |
| A 509 | Definition of Terms Relating to Steel Forgings | Replaced by A 788/ A788M | |
| A 644 | 2009 | Standard Terminology Relating to Iron Castings | |
| A 712 | 2007 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys | |
| A 717/A 717M | 2006 | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens | |
| A 718 | 1975 | Test Method for Surface Insulation Resistivity of Multi-Strip Specimens | Withdrawn 1996 |
| A 719/A 719M | 2007 | Standard Test Method for Lamination Factor of Magnetic Materials | |
| A 902 | 2009 | Standard Terminology Relating to Metallic Coated Steel Products | |
| A 919 | 1993 | Terminology Relating to Heat Treatment of Metals | Replaced by A 941 |
| A 941 | 2009 | Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
| A 944 | 2005 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens | |
| A 956 | 2006 | Standard Test Method for Leeb Hardness Testing of Steel Products | |
| A 971/A 971M | 2005 | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils | |
| A 991/A 991M | 2008 | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products | |
| A1061/A1061M | 2009 | Standard Test Methods for Testing Multi-Wire Steel Strand |
Total Materia est la principale plateforme d'information sur les matériaux. Elle fournit les informations les plus complètes sur les propriétés des matériaux métalliques et non métalliques et sur d'autres données relatives aux matériaux.
Toutes ces informations sont disponibles dans Total Materia Horizon, l'outil ultime d'information et de sélection des matériaux, qui offre un accès inégalé à plus de 540 000 matériaux ainsi qu'à des données de référence sélectionnées et mises à jour.
L'ensemble de Materia Horizon comprend