Najbardziej kompleksowa baza materiałowa na świecie
Language
Language
Choose language

ASTM Standard List: Ferro Alloys, Other Materials and Terms and Definitions

W skrócie:

ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.

This article contains a list of standards that covers among other things:

  • Standards for numerous ferro-alloys
  • Other materials not classified by the standard categories available
  • Terms and definitions giving guidance on terminology used in testing methodology and other topical areas

For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.

Ferro Alloys, Other Materials, and Terms/Definitions

Ferro-alloys


Standard
Number		 Last
version		 Description Status
A 99 2009 Ferromanganese  
A 100 2007 Ferrosilicon  
A 101 2004 Ferrochromium  
A 102 2004 Ferrovanadium  
A 132 2004 Ferromolybdenum  
A 144 2004 Ferrotungsten  
A 145   Low-Carbon Ferromolybdenum Withdrawn 1940
A 146 2004 Molybdenum Oxide Products  
A 323 2006 Ferroboron  
A 324 2008 Ferrotitanium  
A 482 2005 Ferrochrome-Silicon  
A 483 2004 Silicomanganese  
A 495   Calcium-Silicon Alloys  
A 550 2006 Ferrocolumbium  
A 701 2005 Ferromanganese-Silicon  
A 835/A 835M 2005 Sizes of Ferroalloys and Alloy Additives  
A 1025 2005 Ferroalloys, General Requirements  


Others Materials


Standard
Number		 Last
version		 Description Status
A 97   Tungsten Powder Withdrawn 1935
A 700 2005 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment  
A 702 2006 Steel Fence Posts and Assemblies, Hot Wrought  
A 732/A 732M 2009 Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures  
A 801 2004 Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)  
A 845 2000 Titanium Scrap for Use in Deoxidation and Alloying of Steel Withdrawn 2005
A 846 2000 Aluminum Scrap for Use in Deoxidation and Alloying of Steel Withdrawn 2005
A 901 2008 Amorphous Magnetic Core Alloys, Semi-Processed Types  
A 922 2005 Silicon Metal  
A 930 2003 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits  
B 603 2007 Drawn or rolled iron-chromium-aluminum alloys for electrical heating elements  
B 753 2007 Standard Specification for Thermostat Component Alloys  
F 1222 1994 Classification for Hardware for Wood Fencing  
F 761 1997 Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence  


Terms/Definitions


Standard
Number		 Last
version		 Description Status
A 119 1933 Definitions of Terms Relating to Heat Treatment Metals Withdrawn 1942
A 208   Method of Test for Uniformity of Coating by the Preece Test (Copper Sulfate Dip) on Zinc or Steel Articles Replaced by A 239
A 509   Definition of Terms Relating to Steel Forgings Replaced by A 788/ A788M
A 644 2009 Standard Terminology Relating to Iron Castings  
A 712 2007 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys  
A 717/A 717M 2006 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens  
A 718 1975 Test Method for Surface Insulation Resistivity of Multi-Strip Specimens Withdrawn 1996
A 719/A 719M 2007 Standard Test Method for Lamination Factor of Magnetic Materials  
A 902 2009 Standard Terminology Relating to Metallic Coated Steel Products  
A 919 1993 Terminology Relating to Heat Treatment of Metals Replaced by A 941
A 941 2009 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys  
A 944 2005 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens  
A 956 2006 Standard Test Method for Leeb Hardness Testing of Steel Products  
A 971/A 971M 2005 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils  
A 991/A 991M 2008 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products  
A1061/A1061M 2009 Standard Test Methods for Testing Multi-Wire Steel Strand  

Date Published: Apr-2011

WERSJA TESTOWA

Szukaj w Bazie Wiedzy

Wprowadź szukane wyrażenie:

Szukaj pod kątem

Pełny tekst
Słowa kluczowe

Nagłówki
Streszczenia

With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.

solution img

By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from ASTM by selecting this SDO from the popup.

solution img

The result list consists of over 3000 ASTM metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.

solution img

By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.

solution img

From the list of materials, you can review detailed properties and equivalents of each material.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.