The world’s most comprehensive materials database
Language
Language
Choose language

Euronorm Standard List - Structural and Constructional Steels Standards: Part Two

Abstract:

The creation of the EEC (European Economic Community) has made it necessary to establish common standards named "European Norms" (EN), therefore standardizing the common language across Europe. Since 1988 a new series of 'mandatory' European standards (EN) has been created, to replace national standards, such as BS, DIN, SS and NF, throughout 18 countries of Western Europe.

The European (EN) standards include of specifications for delivery conditions, properties, quality, dimensions and definitions of all products, raw materials and processes of the iron and steel industry. Among others, Euronorm standards cover a large variety of structural and constructional steels, from hot and cold rolled steels, plates, sheets and strips, heat treatable steels, castings, stainless and heat resisting steels, electrical steels etc.

For more information on the EN designation system see Introduction to the Euronorm Standard Designation System.

The table below provides a part of the most important Euronorm standards for structural and constructional steels.

For further examples of Structural and Constructional Steel Standards see Euronorm Structural and Constructional Steels: Part One.


Standard
Number		 Last
version		 Description Status
EN 10216-1 2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties  
EN 10216-2 2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties  
EN 10216-3 2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes  
EN 10216-4 2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties  
EN 10216-5 2004 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes  
EN 10217-1 2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties  
EN 10217-2 2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties  
EN 10217-3 2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes  
EN 10217-4 2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties  
EN 10217-5 2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties  
EN 10217-6 2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties  
EN 10217-7 2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes  
EN 10219-1 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions  
EN 10219-2 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties  
EN 10220 2002 Seamless and welded steel tubes - Dimensions and masses per unit length  
EN 10221 1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions  
EN 10223-2 1997 Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes  
EN 10223-3 1997 Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes  
EN 10223-4 1998 Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing  
EN 10223-5 1998 Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing  
EN 10223-6 1998 Steel wire and wire products for fences - Part 6: Steel wire chain link fencing  
EN 10223-7 2002 Steel wire and wire products for fences - Part 7: Steel wire welded panels - For fencing  
EN 10224 2002 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions  
EN 10225 2001 Weldable structural steels for fixed offshore structures - Technical delivery conditions  
EN 10229 1998 Evaluation of resistance of steel products to hydrogen induced cracking (HIC)  
EN 10238 2009 Automatically blast-cleaned and automatically prefabricated primed structural steel products  
EN 10248-1 1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions  
EN 10248-2 1995 Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions  
EN 10249-1 1995 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions  
EN 10249-2 1995 Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions  
EN 10255 2004 Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions  
EN 10263-1 2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions  
EN 10263-2 2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working  
EN 10263-3 2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels  
EN 10263-4 2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering  
EN 10263-5 2001 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels  
EN 10264-1 2002 Steel wire and wire products - Steel wire for ropes - Part 1: General requirements  
EN 10264-2 2002 Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications  
EN 10264-3 2002 Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications  
EN 10264-4 2002 Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire  
EN 10266 2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards  
EN 10267 1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures  
EN 10268 2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions  
EN 10269 2008 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties  
EN 10270-1 2001 Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire  
EN 10270-2 2001 Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire  
EN 10273 2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties  
EN 10277-1 2008 Bright steel products - Technical delivery conditions - Part 1: General  
EN 10277-2 2008 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes  
EN 10277-3 2008 Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels  
EN 10277-4 2008 Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels  
EN 10277-5 2008 Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering  
EN 10278 1999 Dimensions and tolerances of bright steel products  
EN 10279 2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass  
EN 10294-1 2005 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels  
EN 10296-1 2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes  
EN 10297-1 2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes  
EN 10305-1 2002 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes  
EN 10305-2 2002 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes  
EN 10305-3 2002 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes  
EN 10305-4 2003 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems  
EN 10305-5 2003 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes  
EN 10305-6 2005 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems  
EN 10323 2004 Steel wire and wire products - Bead wire  
EN 10324 2004 Steel wire and wire products - Hose reinforcement wire  
EN 10341 2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state  
EN 12385-1 2002 Steel wire ropes - Safety - Part 1: General requirements  
EN 12385-10 2003 Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications  
EN 12385-2 2002 Steel wire ropes - Safety - Part 2: Definitions, designation and classification  
EN 12385-3 2004 Steel wire ropes - Safety - Part 3: Information for use and maintenance  
EN 12385-5 2002 Steel wire ropes - Safety - Part 5: Stranded ropes for lifts  
EN 12385-6 2004 Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts  
EN 12385-7 2002 Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts  
EN 12385-8 2002 Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons  
EN 12385-9 2002 Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons  
EN 12952-2 2001 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories  
EN 13173 2001 Cathodic protection for steel offshore floating structures  
EN 13174 2001 Cathodic protection for harbour installations  
ENV 10080 1995 Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric Replaced by EN 10080:2005

Date Published: Apr-2011

TRY FOR FREE

Search Knowledge Base

Enter a phrase to search for:

Search by

Full text
Keywords

Headings
Abstracts

This article belongs to a series of articles. You can click the links below to read more on this topic.

With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.

solution img

By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from EN by selecting this SDO from the popup.

solution img

The result list consists of over 1000 EN metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.

solution img

By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.

solution img

From the list of materials, you can review detailed properties and equivalents of each material.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.