OCTOBRIE 2020

Updates
  • Updates to high temperature titanium alloys for aerospace
  • Updated AA wrought aluminum alloys
  • EN standard updates for hollow structural steel sections
  • Continued ASME specification updates
  • New proprietary data for lubricants
  • New proprietary data for polymers, adhesives and ceramics
  • New GOST standards for adhesives
  • New fluid ageing, time–temperature dependency, weatherability and irradiation data for polymers
  • New polymers used for 3D printing
  • New corrosion data for polymers
  • New compliance and substance data
Articles

SEPTEMBRIE 2020

Updates
  • Material updates for ASTM alloys used in various applications
  • ISO standard updates for grey cast irons
  • Updates to JIS standards for compacted vermicular graphite irons
  • New proprietary data for lubricants
  • New metals and polymers used for 3D printing
  • New proprietary data for polymers, adhesives and ceramics
  • Updated ASTM standards for Polymers
  • New GOST standard for gaskets
  • New fluid ageing and weatherability data for polymers
  • New corrosion data for polymers
  • New compliance and substance data
  • New substance regulations: (EU) No 1257/2013, IMO MEPC.269(68), Montreal Protocol, Rotterdam Convention, (EC) No 1005/2009, (EU) 2019/1021
Articles

AUGUST 2020

Updates
  • New proprietary data for polymers, adhesives and ceramics
  • New outgassing data for polymer adhesives
  • Updated ASTM standards for Polymers
  • New fluid aging, time-temperature dependency data for polymers
  • New multipoint data for polymers
  • New corrosion data for polymers
  • New metals used for 3D printing
  • New compliance and substance data
  • New substance regulations: Stockholm Convention, SIN List, Clean Air Act (CAA), Korea Existing Chemicals Inventory (KECI), National Inventory of Chemical Substances of Mexico (INSQ)
  • Continued updates SAE AMS specification for steel
  • Adding new ASD-STAN prEN specifications for aerospace series
  • Updated AA alloys according to 'Teal Sheets'
  • Continued addition of new lubricant grades
Articles

JULY 2020

Updates
  • ASTM updates to super strength alloy steel forgings
  • Updates to EN corrosion-resistant steel fasteners
  • Added new registered AA grades
  • Continued addition of new lubricant grades
  • New outgassing data for polymer adhesives
  • New fluid aging, time-temperature dependency data for polymers
  • New multipoint data for polymers
  • New compliance and substance data
  • New corrosion data for polymers
Articles

JUNE 2020

Updates
  • SAE AMS standard updates for titanium alloys
  • Updates to AFNOR NF specifications for aerospace
  • Continued ASME standard updates for pressure vessels
  • Continued addition of new lubricant grades
  • New proprietary data for polymers and adhesives
  • New outgassing data for polymer adhesives
  • New fluid aging, time-temperature dependency data for polymers
  • New multipoint data for polymers
  • New compliance and substance data
  • New corrosion data for polymers
Articles

MAY 2020

Updates
  • Continued ASTM standard updates
  • New EN aerospace series standards added
  • Updates to GB ductile iron specifications
  • Continued addition of new lubricant grades
  • New proprietary data for polymers, adhesives and composites
  • Polymers ASTM standards updated
  • New data for 3D printing metals and non-metals
  • New fluid aging, time-temperature dependency data
  • New compliance and substance data
Articles

APRIL 2020

Updates
  • Updates to GOST specifications for aluminum wire rods
  • Lloyd's Register specifications updated
  • JIS standard updates for malleable iron castings
  • New Enviro data for aluminum alloys
  • Continued addition of new lubricant grades
  • New proprietary data for polymers, adhesives and composites
  • New chemical resistance data for polymers
  • New proprietary data for 3D printing metals and non-metals
  • New Enviro data for polymers
  • New compliance and substance data
Articles

MARCH 2020

Updates
  • AECMA specifications titanium based alloys updated
  • Added new SAE J specification for stainless steel tubing
  • Updates to EN Aerospace series - steel and heat resisting alloys
  • ASTM updates for super heater and heat-exchanger tubes
  • Continued new grades for lubricants and coolants
  • New enviro data for German metals
  • New proprietary data for polymers, adhesives and composites
  • New multipoint data for polymers
  • New chemical resistance data for polymers
  • New proprietary data for 3D printing metals and non-metals
  • New enviro data for polymers and metals
  • New compliance and substance data
Articles

FEBRUARY 2020

Updates
  • Updates to GB high temperature titanium alloys
  • ASME steel updates from BPVC II Part A 2019
  • Updates to ISO cast tool steels
  • Continued new grades for lubricants and coolants
  • New enviro data for Russian metals
  • New proprietary data for polymers, adhesives and composites
  • New multipoint data for polymers
  • New chemical resistance data for polymers
  • New proprietary data for 3D printing metals and non-metals
  • New enviro data for polymers
  • New compliance and substance data
Articles

JANUARY 2020

Updates
  • New proprietary grades for lubricants and coolants added
  • JIS standard updates for GO electrical steels
  • ASTM standard updates with a wide range of applications
  • Updates to NF steels for high temperature applications
  • Updates to MPIF standards 35 for iron, copper & nickel steels
  • New proprietary data for polymers and adhesives
  • New chemical resistance data for polymers
  • New proprietary data for 3D printing metals and non-metals
  • New enviro data for metals
  • New compliance and substance data
Articles

Pentru a vedea mai multe știri arhivate contactați-ne pe
custservice@keytometals.com