ASTM Standard List - Structural and Constructional Steels Standards: Part Three

Выдержки:

ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.

This article contains a list of standards that covers among other things:

  • Specific steel standards for applications in the construction industry
  • Specialist carbon steel pressure vessel plates
  • Steels used in rail and rapid transport industries

For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.

Structural and Constructional Steels: Part Three


Standard
Number
Last
version
Description Status
A 489 2004 Carbon Steel Lifting Eyes /1/
A 490 2009 Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength /3/
A 490M 2009 High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] /3/
A 496/A 496M 2007 Steel Wire, Deformed, for Concrete Reinforcement /no materials/
A 497/A 497M 2007 Steel Welded Wire Reinforcement, Deformed, for Concrete /no materials/
A 498 2006 Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins /no materials/
A 499 2008 Steel Bars and Shapes, Carbon Rolled from "T" Rails /2/
A 500/A 500M 2007 Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes /4/
A 501 2007 Hot-Formed Welded and Seamless Carbon Steel Structural Tubing /1/
A 502 2003 Steel Structural Rivets /4/
A 504/A 504M 2008 Wrought Carbon Steel Wheels /5/
A 505 2005 Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled /no materials/
A 506 2005 Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled /96/
A 507 2006 Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled /96/
A 510 2008 General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel /89/
A 512 2006 Cold-Drawn Buttweld Carbon Steel Mechanical Tubing /25/
A 513 2008 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing /36/
A 514/A 514M 2009 High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding /15/
A 515/A 515M 2007 Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service /4/
A 516/A 516M 2006 Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service /4/
A 517/A 517M 2006 Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered /13/
A 519 2006 Seamless Carbon and Alloy Steel Mechanical Tubing /135/
A 520 1997 Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction Withdrawn 2000 /9/
A 523 2005 Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits /2/
A 524 2005 Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures /2/
A 529/A 529M 2009 High-Strength Carbon-Manganese Steel of Structural Quality /5/
A 530/A 530M 2004 General Requirements for Specialized Carbon and Alloy Steel Pipe /no materials/
A 533/A 533M 2009 Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel /no materials/
A 534 2009 Carburizing Steels for Anti-Friction Bearings /no materials/
A 535 1985 Special-Quality Ball and Roller Bearing Steel Withdrawn 1998 /no materials/
A 537/A 537M 2008 Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel /3/
A 538/A 538M   Pressure Vessel Plates, Alloy Steel, Precipitation Hardening (Maraging), 18 Percent Nickel Withdrawn 1989 /2/
A 539 1999 Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines Withdrawn 2004 /1/
A 540/A 540M 2006 Alloy-Steel Bolting Materials for Special Applications /46/
A 542/A 542M 2009 Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium /22/
A 543/A 543M 2009 Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum /6/
A 544   Steel Wire, Carbon, Scrapless Nut Quality Withdrawn 1991 /11/
A 545   Steel Wire, Carbon, Cold-Heading Quality, for Machine Screws Withdrawn 1991 /16/
A 546   Steel Wire, Medium-High-Carbon, Cold-Heading Quality, for Hexagon-Head Bolts Withdrawn 1991 /8/
A 547   Steel Wire, Alloy, Cold-Heading Quality, for Hexagon-Head Bolts Withdrawn 1991 /no materials/
A 548   Steel Wire, Carbon, Cold-Heading Quality, for Tapping or Sheet Metal Screws Withdrawn 1991 /no materials/
A 549   Steel Wire, Carbon, Cold-Heading Quality, for Wood Screws /no materials/
A 551/A 551M 2008 Carbon Steel Tires for Railway and Rapid Transit Applications /7/
A 552   Alloy Steel Bars for Springs Withdrawn 1974 /no materials/
A 553/A 553M 2006 Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel /2/
A 556/A 556M 2005 Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes /3/
A 563M 2007 Carbon and Alloy Steel Nuts /28/
A 568/A 568M 2009 Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for /55/
A 568M 2009 General Requirement for Steel, Carbon and High-Strength Low-Alloy Hot-Rolled Sheet and Cold-Rolled Sheet [Metric] /55/
A 569/A 569M 1998 Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial /1/
A 570/A 570M 1998 Steel, Sheet and Strip, Carbon, Hot-Rolled Replaced by A1011/A1011M /6/
A 572/A 572M 2007 High-Strength Low-Alloy Columbium-Vanadium Structural Steel /5/
A 573/A 573M 2005 Structural Carbon Steel Plates of Improved Toughness /3/
A 574M 2008 Alloy Steel Socket-Head Cap Screws [Metric] /10/
A 575 2007 Steel Bars, Carbon, Merchant Quality, M-Grades /10/
A 576 2006 Steel Bars, Carbon, Hot-Wrought, Special Quality /72/
A 583 1999 Cast Steel Wheels for Railway Service Withdrawn 2004 /5/
A 587 2005 Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry /1/
A 588/A 588M 2005 High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick /4/
A 589/A 589M 2006 Seamless and Welded Carbon Steel Water-Well Pipe /11/
A 590   Pressure Vessel Plates, Alloy Steel, Precipitation Hardening (Maraging) 12 Percent Nickel Withdrawn 2004 /no materials/
A 595/A 595M 2006 Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use /13/
A 600 2004 Tool Steel High Speed /41/
A 601 2005 Electrolytic Manganese Metal /no materials/
A 605/A 605M   Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered Nickel-Cobalt-Molybdenum-Chromium Withdrawn 1989 /no materials/
A 606/A 606M 2009 Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance /1/
A 607 1998 Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled Replaced by A1008/A1008M and A1011/A1011M /6/
A 611 1997 Structural Steel (SS), Sheet, Carbon, Cold-Rolled Replaced by A1008/A1008M /6/
A 612/A 612M 2007 Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service /1/
A 614   Special Requirements for Bolting Material for Nuclear and Other Special Applications Withdrawn 1986 /no materials/
A 615/A 615M 2009 Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement /6/
A 615M 1992 Deformed and Plain Billet-Steel Bars for Concrete Reinforcement (Metric) Replaced by A615/A615M /no materials/
A 616/A 616M 1996 Rail-Steel Deformed and Plain Bars for Concrete Reinforcement Replaced by A 996/A 996M /no materials/
A 617/A 617M 1996 Axle-Steel Deformed and Plain Bars for Concrete Reinforcement Replaced by A 996/A 996M /no materials/
A 618/A 618M 2004 Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing /4/
A 619/A 619M 1997 Non-Killed Forming Steel (NKFS) Sheet, Carbon Cold-Rolled Withdrawn 1998 /2/
A 620/A 620M 1997 Drawing Steel (DS), Sheet, Carbon, Cold-Rolled Replaced by A 1008/A 1008M /1/

Поиск в Банке Знаний

Введите фразу для поиска:

Поиск по

Всему тексту
Ключевым словам

Заголовкам
Выдержкам

With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.

solution img

By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from ASTM by selecting this SDO from the popup.

solution img

The result list consists of over 3000 ASTM metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.

solution img

By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.

solution img

From the list of materials, you can review detailed properties and equivalents of each material.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.