Green Sand Casting

Sumário:

Although not technically green in color, green sand casting is a wet molding technique using quartz sand to cast iron castings, like ductile iron castings, gray iron castings.
In order for the process to work in an optimum way, a number of key parameters such as compression strength, permeability, pouring temperature all need to be controlled and applied accurately.

Green sand casting is a common sand casting process using green sand as the molding material. Green sand does not mean sand in green color, but is a kind of wet quartz sand in the sense that it is used in a wet environment.

Green sand casting is suitable for manufacturing various cast iron castings, like ductile iron castings, gray iron castings. It is also suitable for producing some simple aluminum castings. As steel castings require larger air permeability, so it is not workable for making steel castings.

The green sand casting remains one of the most versatile casting processes due to readily available and cheap raw materials; flexibility with respect to shape, size and composition; and the possibility of recycling the moulding sand. The sand casting process starts with preparation of mould, pouring molten metal into a sand mould, allowing the metal to solidify, and then breaking away the sand mould to remove a casting product. Out of the various steps involved in the casting process, moulding and melting processes (pouring of molten metal) are the most important stages. Improper control at these stages results in defective castings.

A number of researchers and foundry engineers have carried out research in the field of green sand-casting to improve the quality of castings by adjusting the process parameters.

In the study of S.K. Tiwari et al., an attempt has been made to obtain an optimal parameter setting of green sand casting process to enhance the quality of mild steel castings by reducing the percentage of casting defects. Taguchi method of parameter design is used to set the optimal process parameters All the data required for the research has been collected from the real castings plant condition. In this experiment, a number of factors affecting the green casting process are identified such as grain size, sand composition, fluidity, metal composition, pouring time, cooling time, humidity etc..

Experimental results indicate:

1) The optimum levels of the parameters at which defect level will be minimal are: green compression strength at level 2 (1,800 g/cm2), permeability at level 2 (130), pouring temperature at level 3 (1,450ºC), mould hardness at level 2 (90), and moisture content at level 1 (2.8%);

2) From ANOVA results, parameters green compression strength, permeability, and pouring temperature are significant and parameters mould hardness, and moisture content is insignificant.

3) Percentage contribution: permeability (61.53%) has the most dominant effect on total variation and it is followed by green compression strength (21.54%) and pouring temperature (5.52%).

4) With optimal parameters setting a decrease of 14.86% in defect level has been found against the initial process parameters setting.

Advantage of green sand casting

  • Least expensive
  • Less distortion than in dry sand casting because no baking is required
  • Flasks are ready for reuse in minimum time
  • Dimensional accuracy is good across the parting line
  • Less danger of hot fearing of casting compare to other type

Disadvantages of green sand casting:

  • Sand control is more critical than dry sand casting
  • Erosion occurrence of the mould is common in the production of large castings
  • Certain metals and some castings develop defects if poured into moulds containing moisture
  • More intricate casting can’t be produced
  • The surface finish can deteriorate and dimensional accuracy decreases as the weight of the casting increases



Figure 1: The Green Sand Casting products


References

1. About the Introduction of Green Sand Casting, Accessed MAY 2019;

2. S.K. Tiwari et al.: Optimisation of green sand casting process parameters for enhancing quality of mild steel castings, Int. J. Productivity and Quality Management, Vol. 17, No. 2, 2016, p.127-141;

3. Casting Processes, Chapter 1, Accessed MAY 2019;

4. Cast Iron Machinery Part, Green Sand Casting Supplier in China, Accessed May 2019;

5. Sand Casting Process Basic Concept and Procedure, Accessed MAY 2019.

Procurar conhecimento básico

Colocar uma frase para procurar por:

Procurar por

Texto completo
Palavras chaves

Títulos
Resumo

O banco de dados da Total Materia contém muitos milhares de fundição de materiais através de uma grande variedade de países e padrões.

Quando disponíveis, informações de propriedade completa pode ser vista de materiais incluindo a composição química, propriedades mecânicas, propriedades físicas, dados de propriedades avançadas e muito mais.

Usando a página de pesquisa avançada, é possível pesquisar por materiais por suas principais palavras descritivas detalhadas no título padrão usando a função Standard Descrição da Pesquisa Avançada.

É talvez o que você precisa para estreitar ainda mais os critérios de pesquisa usando os campos na página de pesquisa avançada por exemplo, País / Standard.

Em seguida, clique em Enviar.


Uma lista de materiais será então gerado para você escolher.


Depois de clicar em um material a partir da lista resultante, uma lista de subgrupos derivados de especificações padrão aparece.

A partir daqui é possível ver os dados de propriedades específicas para o material selecionado e também para ver os materiais semelhantes e equivalentes em nossas poderosas tabelas de referência cruzada.


Por exemplo, clicando sobre o link composição química na página subgrupo é possível ver os dados de composição química para o material.

Para você é uma oportunidade de fazer um test drive na Total Materia, nós convidamos você a participar de uma comunidade de mais de 150.000 usuários registrados através da Total Materia Free Trial.