SMF Sheet Metal Forming


Sheet metal forming is one of the most significant manufacturing processes in industry today and is of particular importance in the automotive industry to drive advances in material technology and weight saving.
There are numerous forms of SMF including bending, stretch forming, and deep drawing.

Sheet metal forming is one of the most important manufacturing processes. This is particularly valid for the automotive industry where sheet metal forming has an even more important key position. The automotive industry is the leading sector in many countries and the main driving force behind sheet-metal-forming developments as well (Geiger, 2002).

The competition in car manufacturing is extremely strong leading to larger model variety and shorter model design cycles. The increased competition also leads to a very intense development activity to increase productivity and to reduce costs. Application of light-weight design principles is one of the most important trends to meet the above-mentioned requirements. Obviously, the new design concepts require new materials. The new materials often require new, innovative forming processes and new tooling concepts, as well.

The increased competition also requires to shorten the lead times from the concept to final realisation: to reduce the lead times, the application of various methods of Computer Aided Engineering (CAD/CAM/CAE and FEM techniques) are inevitable.

Sheet metal forming processes are mechanical processes, designed to make products from metal sheet without material removal, they are applied extensively by the manufacturing industry, to make products like kitchen sinks (deep drawing), tubes (roll bending), or panel sides for automotive applications (drawing/stretching).

The process is suited for mass production and products are pressed, fully automated, in large volumes with the help of mechanical or hydraulic presses. Each sheet metal forming process has its own characteristics features in terms of tooling and material flow. The set-up for a commonly applied deep drawing process is shown in Figure 1.

Thin, initially flat, sheet material is clamped between a blank holder and a forming die. The punch moves in the direction indicated by the arrow, and forces the sheet material to flow into the forming die. In this way the metal sheet is formed to a cup. Usually the sheet material is pre-coated with a metal forming lubricant to control friction and wear arises to sliding between the metal sheet and the blank holder and the forming die.

Figure 1: Deep drawing as an example of SMF-processes


Bending is widely used SMF operation since different kinds of shapes are possible to produce with the same equipment. In V-shape bending the punch gradually presses the sheet into a V-shaped die see Figure 2. By stopping the process after a certain punch length different shapes can be produced.

Figure 2: Schematic of the bending operation: a) free bending, b) initiating full punch and c) full punch

Other types of bending operations are U-bending, roll bending and roll forming.

Stretch forming

In stretch forming the sheet (blank) is firmly clamped at its circumference after which a punch deforms the sheet, see Figure 3. The basic difference between deep drawing and stretching is that in stretching the steel sheet is not allowed to deform between the blank holder while in deep drawing the sheet deforms and slides between the blank holder.

Figure 3: Schematic of the stretching process

Deep drawing

In deep drawing, the sheet is clamped by a blank holder and deformed by a punch. The sheet is allowed to slide between the blank holder and the die in order to avoid wrinkling of the sheet, see region I Figure 4. In deep drawing local trybosystems and contact types can be identified. In region II the highest wear rate of the tool and the sheet is expected due to a bending and unbending deformation of the sheet and high contact pressures (P ≈ 100 MPa).

Figure 4: Schematic of the deep drawing and identified contact types


1. M.Tisza: Recent development trends in sheet metal forming, Int. J. Microstructure and Materials Properties, Vol. 8, Nos. 1/2, 2013,p.125-140;

2. Emile van der Heide: Lubricant failure in sheet metal forming processes, PhD Thesis, University of Twente, Enschede, The Netherlands, ISBN 90-365-1724-9;

3. P.Carlsson: Surface Engineering in Sheet Metal Forming, Uppsala Universitet, Uppsala, Finland, 2005, ISBN 91-554-6136-0; ISSN 1651-6214

기술 자료 검색

검색할 어구를 입력하십시오:

검색 범위



Total Materia는 단조용으로 적합한 다양한 국가와 규격 내 수천개의 재질에 대한 정보를 포함하고 있습니다.

재질의 화학적 조성, 기계적 특성, 물리적 특성, 고급 물성 데이터 등의 전체적인 특성 정보들을 어디서든 검토하실 수 있습니다.

고금 검색 내 규격 설명 기능을 이용하여, 규격 내 재질에 설명된 키워드를 통해 재질을 검색하실 수 있습니다.

검색 범위 좀 더 줄이기를 원하신다면 국가/규격과 같은 다른 조건을 지정할 수 있습니다.

검색 버튼을 클릭합니다.

선택된 정보에 부합하는 일련의 재질이 검색됩니다.

결과 리스트에서 재질을 선택하시면, 일련의 규격 사양 소그룹이 나타납니다.

여기에서 선택한 재질의 특정 특성 데이터를 검토하실 수도 있고, 강력한 상호 참조 표를 이용하여 유사 재질이나 등가 재질을 검토하는 것 또한 가능합니다.

예를 들어, 소그룹 내 기계적 특성 링크를 클릭하시면, 재질의 항복 응력, 인장 응력, 연신율 및 충격 데이터 등과 같은 기계적 특성들을 검토 하실 수 있습니다.

Total Materia 데이터베이스를 사용해 보실 수 있는 기회가 있습니다. 저희는 Total Materia 무료 체험을 통해 150,000명 이상의 사용자가 이용하고 있는 커뮤니티로 귀하를 초대합니다.