Euronorm Standard List: Wrought, Castings, Ingots, and Remelting

요약:

The creation of the EEC (European Economic Community) has made it necessary to establish common standards named "European Norms" (EN), therefore standardizing the common language across Europe. Since 1988 a new series of 'mandatory' European standards (EN) has been created, to replace national standards, such as BS, DIN, SS and NF, throughout 18 countries of Western Europe.

Aluminum is one of the most economical and structurally effective materials used for commercial and military equipment applications. Some of its attractive properties include: good appearance, easy of fabrication, good corrosion resistance, low density and high strength-to-weight ratio, high fracture toughness etc.

For more information on the EN designation system see Introduction to the Euronorm Standard Designation System.

The list of standards below cover among other things:

A range of aluminium alloys used for general use and for multiple applications
Aluminium used for drill pipes in the petroleum and natural gas industries
Various aluminium alloys used in general structural and constructional applications

Click on the below links to see lists of Euronorm standards covering the following material categories:

Aluminium Materials

Aluminium Aerospace Materials

Wrought/Castings/Ingots/Remelting

Standard Number	Last version	Description	Status
EN 485-1	2008	Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 485-2	2008	Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
EN 485-3	2003	Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
EN 485-4	1993	Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
EN 486	2009	Aluminium and aluminium alloys - Extrusion ingots - Specifications
EN 487	2009	Aluminium and aluminium alloys - Rolling ingots - Specifications
EN 541	2006	Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications
EN 546-1	2006	Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery
EN 546-2	2006	Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties
EN 546-3	2006	Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
EN 546-4	2006	Aluminium and aluminium alloys - Foil - Part 4: Special property requirements
EN 570	2007	Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification
EN 573-1	2004	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
EN 573-3	2009	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition
EN 573-4	2007	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products
EN 1301-1	2008	Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
EN 1301-2	2008	Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
EN 1301-3	2008	Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
EN 1386	2007	Aluminium and aluminium alloys - Tread plate - Specifications
EN 1396	2007	Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 1592-1	1997	Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery
EN 1592-2	2000	Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties
EN 1592-3	1997	Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
EN 1592-4	1999	Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
EN 1676	1996	Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
EN 1706	1998	Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN 1715-1	2008	Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery
EN 1715-2	2008	Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications
EN 1715-3	2008	Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)
EN 1715-4	2008	Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications
EN 12020-1	2008	Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
EN 12020-2	2008	Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
EN 12392	2000	Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
EN 12482-1	1998	Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock
EN 12482-2	1998	Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock
EN 13195-1	2002	Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications
EN 13957	2008	Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification
EN 13958	2008	Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification
EN 13981-1	2003	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products
EN 13981-2	2004	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets
EN 13981-3	2006	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings
EN 13981-4	2006	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings
EN 14121	2009	Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications
EN 14242	2004	Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
EN 14286	2008	Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods
EN 14287	2004	Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
EN 14361	2004	Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
EN 14726	2005	Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
EN 15088	2005	Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
EN ISO 15546	2007	Petroleum and natural gas industries - Aluminium alloy drill pipe