The creation of the EEC (European Economic Community) has made it necessary to establish common standards named "European Norms" (EN), therefore standardizing the common language across Europe. Since 1988 a new series of 'mandatory' European standards (EN) has been created, to replace national standards, such as BS, DIN, SS and NF, throughout 18 countries of Western Europe.
Aluminum is one of the most economical and structurally effective materials used for commercial and military equipment applications. Some of its attractive properties include: good appearance, easy of fabrication, good corrosion resistance, low density and high strength-to-weight ratio, high fracture toughness etc.
For more information on the EN designation system see Introduction to the Euronorm Standard Designation System.
The list of standards below cover among other things:
Click on the below links to see lists of Euronorm standards covering the following material categories:
Standard Number | Last version | Description | Status |
EN 485-1 | 2008 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery | |
EN 485-2 | 2008 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties | |
EN 485-3 | 2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products | |
EN 485-4 | 1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products | |
EN 486 | 2009 | Aluminium and aluminium alloys - Extrusion ingots - Specifications | |
EN 487 | 2009 | Aluminium and aluminium alloys - Rolling ingots - Specifications | |
EN 541 | 2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications | |
EN 546-1 | 2006 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery | |
EN 546-2 | 2006 | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties | |
EN 546-3 | 2006 | Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions | |
EN 546-4 | 2006 | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements | |
EN 570 | 2007 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification | |
EN 573-1 | 2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system | |
EN 573-3 | 2009 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition | |
EN 573-4 | 2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products | |
EN 1301-1 | 2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery | |
EN 1301-2 | 2008 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties | |
EN 1301-3 | 2008 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions | |
EN 1386 | 2007 | Aluminium and aluminium alloys - Tread plate - Specifications | |
EN 1396 | 2007 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications | |
EN 1592-1 | 1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery | |
EN 1592-2 | 2000 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties | |
EN 1592-3 | 1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes | |
EN 1592-4 | 1999 | Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes | |
EN 1676 | 1996 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications | |
EN 1706 | 1998 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties | |
EN 1715-1 | 2008 | Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery | |
EN 1715-2 | 2008 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications | |
EN 1715-3 | 2008 | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) | |
EN 1715-4 | 2008 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications | |
EN 12020-1 | 2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery | |
EN 12020-2 | 2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form | |
EN 12392 | 2000 | Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment | |
EN 12482-1 | 1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock | |
EN 12482-2 | 1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock | |
EN 13195-1 | 2002 | Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications | |
EN 13957 | 2008 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification | |
EN 13958 | 2008 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification | |
EN 13981-1 | 2003 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products | |
EN 13981-2 | 2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets | |
EN 13981-3 | 2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings | |
EN 13981-4 | 2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings | |
EN 14121 | 2009 | Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications | |
EN 14242 | 2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis | |
EN 14286 | 2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods | |
EN 14287 | 2004 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components | |
EN 14361 | 2004 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts | |
EN 14726 | 2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis | |
EN 15088 | 2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery | |
EN ISO 15546 | 2007 | Petroleum and natural gas industries - Aluminium alloy drill pipe |
Total Materiaは、金属および非金属材料の特性やその他の材料記録に関する最も広範な情報を提供する、業界をリードする材料情報プラットフォームです。
これらの情報はすべて、究極の素材情報・選択ツールであるTotal Materia Horizonで入手可能です。Total Materia Horizonは、54万を超える素材への比類なきアクセスを提供するだけでなく、監修・更新された参考データも提供しています。
トータル・マテリア・ホライズンには以下が含まれる: