Thermodynamics of TiN Formation in Melts: Part One

Sommario:

In steelmaking process, a strong nitride forming element such as titanium is often added to stabilize nitrogen and improve mechanical properties of steel through the grain refinement during hot rolling.
Recently, the formation of titanium nitride as a secondary inclusion precipitated during solidification received great interest because it is known to help the formation of equi-axed cast structure. On the other hand, titanium nitride formed in liquid steel can agglomerate and cause a nozzle clogging during continuous casting and surface quality problems of final products. In order to control the formation titanium nitride in various grades of steel, it is essential to have accurate thermodynamic data of titanium and nitrogen in steel.

Introduction

In steelmaking process, a strong nitride forming element such as titanium is often added to stabilize nitrogen and improve mechanical properties of steel through the grain refinement during hot rolling. Recently, the formation of titanium nitride as a secondary inclusion precipitated during solidification received great interest because it is known to help the formation of equi-axed cast structure. On the other hand, titanium nitride formed in liquid steel can agglomerate and cause a nozzle clogging during continuous casting and surface quality problems of final products. In order to control the formation titanium nitride in various grades of steel, it is essential to have accurate thermodynamic data of titanium and nitrogen in steels containing other alloying elements.

The reaction equilibrium for the formation of TiN in liquid iron can be written as:

TiN(S) = [Ti] + [N]  ..........  (1)

ΔG° = 379000 - 149 T J  ..........  (2)

K = hTi hN / αTiN= fTi fN[%Ti] [%N]  ..........  (3)

Where:

  • K is the equilibrium constant for reaction 1
  • hTi hN activity of titanium and nitrogen relative to 1 mass% standard state in liquid iron respectively
  • fTi and fN interaction coefficient titanium and nitrogen, respectively.

During deoxidation process, the interaction parameter between titanium and silicon in liquid steels is important, because recently complex deoxidation by silicon and titanium is carried out in many grades of steels including stainless steels. The results from many investigations using similar technique show a large disagreement on the effect of silicon on the activity coefficient of titanium.

In the other hand, it is well known that the thermodynamic data of titanium in Fe-Cr melts are not consistent in the literature, and little information is available at temperatures other than 1600°C.

Because of the all mentioned above, the purpose of the investigations by J.J.Pak et. al., where to obtain reliable thermodynamic data of titanium and nitrogen/silicon in both Fe-Cr and Fe-Si melts as a function of temperature, in order to predict under what condition titanium nitride will form during steel processing. The metal-nitride-gas equilibration experiments were carried out to determine soluble titanium and nitrogen in Fe-Cr and Fe-Si melts respectively in the presence of pure solid TiN under various nitrogen pressures. The experiment was carried out in a graphite resistance furnace in the temperature range of 1570-1650°C.

Activity Coefficient of Titanium

Table 1 and 2 summarizes the experimental results of metal-nitride-gas equilibrium for Fe-Cr and Fe-Si melts at 1843-1923 K (1570-1650°C).

During the equilibration experiments, the following equilibrium can be established:

TiN(S) = [Ti] + ½N2(g)  ..........  (4)

ΔG° = 375 402 - 172.89 T J  ..........  (5)

K= hTiN2 / αTiN = fTi[%Ti] P½N2  ..........  (6)

Where K is the equilibrium constant for reaction (1), and hTi is the activity of titanium relative to 1 mass% standard state in liquid iron, fTi is the activity coefficient of titanium and PN2 is the nitrogen partial pressure in the gas phase. Under the experimental condition, the activity of titanium nitride is unity.

Table 1: Experimental results of metal-nitride gas equilibrium in Fe-Si melts

Table 2: Experimental results of metal-nitride gas equilibrium in Fe-Cr melts

The equilibrium constant K can be rewritten as the following relation using the appropriate interaction parameters:

log KFe-Cr = log fTi + log[%Ti] + ½log PN2 =
= eCrTi[%Cr] + rCrTi[%Cr]2 + eTiTi[%Ti] + eNTi[%N] + eOTi[%O] + log[%Ti] + ½log PN2  ..........  (7)

Then

log fCrTi = eCrTi[%Cr] + rCrTi[%Cr]2 =
= log K11 - eTiTi[%Ti] - eNTi[%N] - eOTi[%O] - log[%Ti] - ½log PN2  ..........  (8)

Where fCrTi is the interaction coefficient of Cr on Ti in liquid iron, and eCrTi and rCrTi are the first and second order interaction parameters of Cr on Ti, respectively.

In the same way, for Fe-Si melts, the equilibrium constant K can be rewritten as the following relation using the appropriate interaction parameters:

log KFe-Si = log fTi + log[%Ti] + ½log PN2 =
= eSiTi[%Si] + rSiTi[%Si]2 + eTiTi[%Ti] + eNTi[%N] + log[%Ti] + ½log PN2  ..........  (9)

Then

log fSiTi = eSiTi[%Si] + rSiTi[%Si]2 =
= log K12 - eTiTi[%Ti] - eNTi[%N] - log[%Ti] - ½log PN2  ..........  (10)

Where fSiTi is the interaction coefficient of Si on Ti and is a measure of the effect of specific concentration of Si on the behavior of Ti in dilute solution in liquid iron, and eSiTi and rSiTi are the first and second order interaction parameters of Si on Ti, respectively.

The Tables 3 and 4 show the values of eCrTi; rCrTi, eSiTi; rSiTi in Eq.9 and Eq.10 given from many experimental results of equilibrium titanium and nitrogen contents as a function of both chromium content in Fe-Cr-Ti-N melts and silicon content in Fe-Si-Ti-N melts.

Table 3: Interaction parameters of Si on Ti and N

  1873 K Temperature
Dependency
eSiTi -0.0256 177.5/T-0.120
2.1  
1.431  
0.064  
rSiTi 0  
-0.00065  
eSiN 0.0491 -286.2/T + 0.202
0.047  
0.048  
-0.038  
rSiN 0  

Table 4: Interaction parameters of Cr on Ti and N

  1873 K Temperature
Dependency
eCrTi 0.028 1196/T-0.61
0.055  
0.022  
0.016  
0.024  
rCrTi 0  
-0.0001  
0.0005  
-0.045 - 850/T + 0.409
eCrN -0.047  
-0.046 - 164/T - 0.0415
-0.045  
rCrN 0  
-0.0004  
0.00032 1.67/T - 0.0006

Criteri di ricerca
Inserite il vostro testo in inglese per la ricerca:

Ricerca tramite

Ricerca tramite

Testo completo
Intestazioni

Articolo
Sommario

Questo Articolo fa parte di una serie di Articoli di tecnologia metallurgica. È possibile fare clic sui link qui sotto per saperne di più su questo argomento.

Trovare dati relativi alla composizione chimica nel database Total Materia non potrebbe essere più facile.

In pochi secondi è possibile reperire la composizione chimica per oltre 175.000 leghe metalliche in costante incremento mensile.

Per prima cosa occorre inserire la Designazione della lega che interessa nel campo di Ricerca Rapida. Opzionalmente si può restringere la ricerca selezionando il Paese / Normativa dalla lista a discesa, e poi si clicca su "Invio".


Total Materia produrrà la lista dei materiali che rispettano i dati inseriti.
Cliccare a questo punto sul materiale di interesse.


Nella pagina dei "Sottogruppi" si identifica la Normativa che interessa tra quelle proposte che contengono la lega selezionata, e quindi si clicca sul link relativo alla Composizione Chimica per visualizzare i dati di composizione del materiale selezionato. I dati di Composizione Chimica disponibili sono evidenziati in parentesi accanto al link.


I dati di Composizione Chimica verranno quindi visualizzati in tabella assieme ad informazioni del materiale selezionato a titolo di riferimento (Paese, Normativa, Commento ecc.).


Per consentirvi di testare il Database Total Materia "senza impegno", vi invitiamo a unirvi alla comunità degli Utenti registrati per i test gratuiti a Total Materia.