European standards for metalic materials II

Sommario:

In the table of standards for mechanical testing of metallic materials

  • methods for static and dynamic mechanical testing,
  • methods for non-destructive testing of metallic materials
  • and methods for chemical analysis of ferrous materials
are presented.

STANDARDS FOR MECHANICAL TESTING OF METALLIC MATERIALS

EN 10002 - 1 1996 Metallic materials; tensile testing; part 1: method of test
EN 10002-1/AC/1 1996 Metallic materials; tensile testing; part 1: method of test; amendment to EN 10002 - 1
EN 10002 - 2 1996 - 06 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
EN 10002 - 3 1996 - 06 Metallic materials; Tensile testing; Part 3: Calibration of force proving instruments used for the verification of uniaxial testing machines
EN 10002 - 4 1994 - 11 Metallic materials; tensile test; part 4: verification of extensiometers used in uniaxial testing
EN 10002 - 5 1991 - 10 Metallic materials; tensile testing; part 5: method of testing at elevated temperature
EN 10003 - 1 1996 Metallic materials; Brinell hardness test - Part 1: Test method
EN 10003 - 2 1996 - 06 Metallic materials; Brinell hrdness test; -Part 2: Verification of Brinell hardness testing machines
EN 10003 - 3 1996 - 06 Metallic materials; Brinell hrdness test; -Part 3: Calibration of standardized blocks to be used for Brinell hardness testing machines
EN 10004 - 1 1991 - 02 Metallic materials; hardness test; part 1: Rockwell test (scales A, B, C, D, E, F, G, H, K )
EN 10004 - 2 1991 - 02 Metallic materials; hardness test; part 2: verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K )
EN 10004 - 3 1991 - 02 Metallic materials; hardness test; part 3: calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K )
EN 10045 - 2 1996 - 06 Metallic materials; Charpy impact test; part 2: verification of the testing machine ( pendulum impact )
EN 10109 - 1 1996 Metallic materials - Hardness test - Part 1: Rockwell test (scales A, B, C, D, E, F, G, H, K) and Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
EN 10109 - 2 1996 - 06 Metallic materials - Hardness test - Part 2: Verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
EN 10109 - 3 1996 - 06 Metallic materials - Hardness test - Part 3: Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
EN 10232 1993 - 10 Metallic materials; tube (in full section); bend test
EN 10233 1993 - 10 Metallic materials; tube flattening test
EN 10234 1993 - 10 Metallic materials; tube drift expanding test
EN 10235 1993 - 10 Metallic materials; tube flanging test
EN 10236 1993 - 10 Metallic materials; tube; ring expanding test
EN 10237 1993 - 10 Metallic materials; tube; ring tensile test
EN 10238 1995 - 12 Automatically blast cleaned and primed steel products
EN 10251 1995 - 07 Magnetic materials - Methods of determination of geometrical characteristics of electrical steel sheet and strip
EN 10252 1995 - 02 Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
CR 10261 1995 - 01 ECISS Information Circular 11 - Iron and steel - Review of available methods of chemical analysis
ENV 22605 - 1 1991 - 10 Steel products for pressure purposes; derivation and verification of elevated temperature properties; part 1: yield or proof stress of carbon and low alloy steel products (ISO 2605-1: 1976)
ENV 22605 - 2 1991 - 10 Steel products for pressure purposes; derivation and verification of elevated temperature properties; part 2: proof stress of austenitic steel products (ISO 2605-2: 1976)
ENV 22605 - 3 1991 - 10 Steel products for pressure purposes; derivation and verification of elevated temperature properties; part 3: alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limit (ISO 2605-3: 1985)
EN ISO 945 1994 - 07 Cast iron - Designation of microstructure of graphite (ISO 945 : 1975)
EN ISO 10380 1995 - 05 Corrugated flexible metallic hose and hose assemblies (ISO 10380 : 1994)

STANDARDS FOR NON-DESTRUCTIVE TESTING OF METALLIC MATERIALS

EN 10228 - 1 1994 - 05 Non-destructive testing of steel forgings - Part 1: Magnetic particule inspection
EN 10228 - 2 1994 - 05 Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228 - 3 1994 -12 Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228 - 4 1996 -12 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-feritic stainlless forgings
EN 10246 - 1 1995 - 09 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
EN 10246 - 2 1995 - 11 Non-destructive testing of steel tubes - Part 2:
EN 10246 - 3 1995 - 10 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc welded) steel tubes for the detection of imperfections
EN 10246 - 5 1995 - 10 Non-destructive testing of steel tubes - Part 5:Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
EN 10246 - 6 1995 - 10 Non-destructive testing of steel tubes - Part 6:Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
EN 10246 - 7 1995 - 09 Non-destructive testing of steel tubes - Part 7:Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
EN 10246 - 8 1995 - 10 Non-destructive testing of steel tubes - Part 8:Automatic ultrasonic testing of the weld seam of electric resistance and induction welded steel tubes for the detection of longitudinal imprefections
EN 10246 - 9 1995 - 10 Non-destructive testing of steel tubes - Part 9:Automatic ultrasonic testing of the weld seam of submerged ar welded steel tubes for the detection of longitudinal and/or transverse imperfections
EN 10246 - 10 1995 - 10 Non-destructive testing of steel tubes - Part 10:Radiographic testing of the weld seam of submerged arc-weld steel tubes for the detection of imperfections
EN 10246 - 14 1995 - 10 Non-destructive testing of steel tubes - Part 14:Automatic ultrasonic testing for the detection of laminar imperfections for seamless and welded (except submerged arc-welded) steel tubes
EN 10246 - 15 1995 - 10 Non-destructive testing of steel tubes - Part 15:Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
EN 10256 1995 - 06 Non-destructive testing of steel tubes - Qualification and competence of levels 1 and 2 non destructive testing personnel
EN 29302 1991 - 02 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
EN 29303 1991 - 02 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections

STANDARDS FOR CHEMICAL ANALYSIS OF FERROUS MATERIALS

EN 10036 1996 - 08 Chemical analysis of ferrous materials; determination of total carbon in steels and irons; gravimetric method after combustion in a stream of oxygen
EN 10071 1996 - 08 Chemical analysis of ferrous materials; determination of manganese in steels and irons; electrometric titration method
EN 10136 1989 - 01 Chemical analysis of ferrous materials; determination of nickel in steels and irons; flame atomic absorption spectrometric method
EN 10177 1989 - 01 Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method
EN 10178 1989 - 01 Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method
EN 10179 1989 - 01 Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method
EN 10181 1989 - 01 Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method
EN 10184 1989 - 05 Chemical analysis of ferrous materials; determination of phosphorus in steels and irons; spectrophotometric method
EN 10184/AC 1991 - 09 Chemical analysis of ferrous materials; determination of phosphorus in steels and irons; spectrophotometric method; amendment
EN 10188 1989 - 05 Chemical analysis of ferrous materials; determination of chromium in steels and irons; flame atomic absorption spectrometric method
EN 10200 1991 - 12 Chemical analysis of ferrous materials; determination of boron in steel; spectrophotometric method
EN 10201 1988 - 01 Chemical analysis of ferrous materials; determination of silicon in steels and iron; flame atomic absorption spectrometric method
EN 10211 1995 - 10 Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
EN 10212 1995 - 03 Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrometric method
EN 10265 1995 - 12 Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
EN 10276 - 1 1995 - 09 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
EN 24159 1989 - 05 Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1 st edition 1978.12.15)
EN 24159/AC 1 1989 - 06 Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method; amendment 1 to EN 24159 : 1989 (ISO 4159 : 1978)
EN 24829 - 1 1990 - 03 Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 1: silicon content between 0,05 and 1%
EN 24829 - 1/AC 1991 - 09 Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 1: silicon content between 0,05 and 1%; amendment (ISO 4829-1 : 1986)
EN 24829 - 2 1990 - 03 Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 2: silicon content between 0,01 and 0,05%
EN 24829 - 2/AC 1991 - 09 Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 2: silicon content between 0,01 and 0,05%; amendment (ISO 4829-2 : 1986)
EN 24934 1989 - 05 Steel and cast iron; determination of sulfur content; gravimetric method (ISO 4934, 1 st edition 1980.10.01)
EN 24935 1991 - 12 Steel and cast iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace (ISO 4935 : 1989)
EN 24935/AC 1992 - 06 Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace; amends (ISO 4935 : 1989)
EN 24937 1990 - 03 Steel and iron; determination of chromium content; potentiometric or visual method
EN 24937/AC 1991 - 09 Steel and iron; determination of chromium content; potentiometric or visual method; amendment (ISO 4937 : 1986)
EN 24938 1990 - 03 Steel and iron; determination of nickel content; gravimetric or titrimetric method
EN 24938/AC 1991 - 09 Steel and iron; determination of nickel content; gravimetric or titrimetric method; amendment (ISO 4938 : 1986)
EN 24943 1990 - 03 Chemical analysis of ferrous metal; determination of copper content; flame atomic absorption spectrometric method
EN 24943/AC 1991 - 09 Chemical analysis of ferrous metal; determination of copper content; flame atomic absorption spectrometric method; amendment (ISO 4943 : 1985)
EN 24946 1990 - 03 Determination of copper content in steel and cast iron
EN 24946/AC 1991 - 09 Steel and cast iron; determination of copper content; 2,2` diquinolyl spectrophotometric method; amendment (ISO 4946 : 1984)
EN 24947 1991 - 03 Steel and cast iron; determination of vanadium content; potentiometric titration method (ISO 4947 : 1986)
EN ISO 10280 1995 - 09 Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotomatric mathod (ISO 10280 : 1991)
EN ISO 10700 1995 - 09 Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method (ISO 10700 : 1994)
EN 10211 1995 - 03 Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
EN ISO 10806 1995 - 05 Pipework - Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses (ISO 10806 : 1994)
EN ISO 10807 1995 - 05 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807 : 1994)Warning: withdrawn document

Criteri di ricerca
Inserite il vostro testo in inglese per la ricerca:

Ricerca tramite

Ricerca tramite

Testo completo
Intestazioni

Articolo
Sommario

Con Total Materia trovare informazioni su una Normativa, il suo status di aggiornamento e i materiali che contiene è a un click di distanza.

In pochi secondi è possibile trovare dati dettagliati sulle proprietà dei materiali o cercare materiali equivalenti a partire dalla lista delle Normative di Total Materia.

Per iniziare, fare clic sul pulsante relativo alle lista delle Normative nella barra dei menu.


Semplicemente selezionando una Normativa e / o digitando il numero della Normativa stessa, si ottengono risultati immediati dalla massa di oltre 30.000 Normative censite.

Ad esempio, è possibile rivedere tutti i materiali della Normativa ASTM selezionando questa dalla lista a discesa.


La lista dei risultati è costituita da 3000 materiali associati alla Normativa ASTM. Le informazioni comprendono: descrizione della Normativa, anno dell'ultima emissione, lo stato attuale (valida, sostituita, ecc.) e un collegamento immediato ai singoli materiali definiti da questa Normativa.


Con un semplice click sul link ai materiali, è possibile visualizzare l' elenco delle leghe metalliche definite dalla Normativa selezionato.


Dall'elenco dei materiali, è possibile esaminare proprietà dettagliate e corrispondenze.


Per consentirvi di testare il Database Total Materia "senza impegno", vi invitiamo a unirvi alla comunità degli Utenti registrati per i test gratuiti a Total Materia.