In the table of European standards for metallic materials, specifications for seamless and welded steel pipes and pipes products, wire and wire products, forgings, sheets, strips and definition of steel products are presented.
EN 1369 | 1996 - 09 | Founding; magnetic particle inspection |
EN 1370 | 1996 - 09 | Founding; surface roughness inspection by visualtactile comparators |
EN 1371-1 | 1994 - 02 | Founding; liquid penetrant inspection; part 1: sand, gravity die and low pressure die castings |
EN 1559-1 | 1994 - 08 | Founding - Technical conditions of delivery - Part 1: General |
EN 1559-2 | 1995 - 09 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
EN 1559-3 | 1994 - 08 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
EN 1559-5 | 1995 - 03 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
EN 1560 | 1994 - 08 | Founding - Designation system for cast iron - Material symbols and material numbers |
EN 1561 | 1994 - 08 | Founding - Grey cast irons |
EN 1562 | 1994 - 08 | Founding - Malleable cast irons |
EN 1563 | 1994 - 08 | Founding - Spheroidal graphite cast irons |
EN 1564 | 1994 - 08 | Founding - Austempered ductile cast irons |
EN 12454 | 1996 - 12 | Founding - Visual examination of surface disccontinuities - Steel and castings |
EN 10001 | 1990 - 07 | Definition and classification of pig - irons |
EN 10016 - 1 | 1994 - 12 | Non - alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
EN 10016 - 2 | 1994 - 12 | Non - alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod |
EN 10016 - 3 | 1994 - 12 | Non - alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod |
EN 10016 - 4 | 1994 12 | Non - alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications |
EN 10020 | 1995 - 12 | Definition and classification of grades of steel |
EN 10020 / AC | 1996 - 08 | Determination and classification of grades of steel; amendment to EN 10020: 1988 |
EN 10021 | 1996 - 01 | General technical delivery requirements for steel and iron products |
EN 10024 | 1996 - 08 | Hot rolled taper flange I sections - Tolerances on shape and dimensions |
EN 10025 | 1996 - 08 | Hot rolled products of non -alloy structural steels; technical delivery conditions ( includes amendment A1: 1993) |
EN 10027 - 1 | 1995 - 12 | Designation systems for steels; part 1: steel names, principal symbols |
EN 10027 - 2 | 1995 - 12 | Designation systems for steels; part 2: numerical system |
ECISS/IC 10 | 1995 - 12 | Designation systems for steel: Additional symbols for steel names |
EN 10028 - 1 | 1996 - 08 | Flat products made of steels for pressure purposes; part 1: general requirements |
EN 10028 - 2 | 1996 - 08 | Flat products made of steels for pressure purposes; part 2: non - alloy and alloy steels with specified elevated temperature properties |
EN 10028 - 3 | 1992 - 12 | Flat products made of steels for pressure purposes; part 3: weldable fine grain steels, normalized |
EN 10028 - 4 | 1994 - 09 | Flat products made of steels for pressure purposes; part 4: Nickel alloy steels with specified low temperature properties |
EN 10028 - 5 | 1993 - 10 | Flat products made of steels for pressure purposes; part 5: weldable fine grain steels, thermomechanically rolled |
EN 10028 - 6 | 1993 - 10 | Flat products made of steels for pressure purposes; part 6: weldable fine grain steels, quenched and tempered |
EN 10029 | 1996 - 08 | Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass |
EN 10029/AC | 1996 - 08 | Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass |
EN 10034 | 1993 - 09 | Structural steel I and H sections; tolerances on shape and dimensions |
EN 10048 | 1995 - 06 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10051 | 1991 - 12 | Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape |
EN 10051/A1 | 1995 - 09 | Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape |
EN 10052 | 1996 - 08 | Vocabulary of heat treatment terms for ferrous products |
EN 10055 | 1995 - 11 | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
EN 10056 | 1991 - 03 | Structural steel equal and unequal leg angles; tolerances on shape and dimensions |
EN 10056 - 1 | 1994 - 11 | Structural steel equal and unequal leg angles - Part 1: Dimensions |
EN 10056 - 2 | 1993 - 09 | Structural steel equal and unequal leg angles; part 2: tolerances on shape and dimensions |
EN 10067 | 1992 - 08 | Hot rolled bulb flats; dimensions and tolerances on shape and dimensions |
EN 10079 | 1995 - 12 | Definition of steel products |
ENV 10080 | 1995 - 04 | Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric |
EN 10083 - 1 | 1996 - 08 | Quenched and tempered steels; part 1: technical delivery conditions for special steels |
EN 10083 - 1/A1 | 1995 - 03 | Quenched and tempered steels - Part 1: Technical delivery conditions for special steels |
EN 10083 - 2 | 1991 - 02 | Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels |
EN 10083 - 2/A1 | 1995 - 03 | Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels |
EN 10083 - 3 | 1995 - 09 | Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels |
EN 10084EN 10087 | 1995 - 021995 - 04 | Case hardening steels - Technical delivery conditionsFree - cutting steels - Technical delivery conditions for semi - finished products, hot rolled bars and rods |
EN 10088 - 1 | 1995 - 04 | Stainless steels - Part 1: List of stainless steels |
EN 10088 - 2 | 1995 - 04 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes |
EN 10088 - 3 | 1995 - 04 | Stainless steels - Part 3: Technical delivery conditions for semi - finished products, bars, rods and sections for general purposes |
EN 10095 | 1996 - 02 | Heat - resisting steels and alloys |
EN 10106 | 1995 - 12 | Cold rolled non - oriented electrical steel sheet and strip delivered in fully processed state |
EN 10107 | 1995 - 12 | Grain - oriented electrical steel sheet and strip delivered in fully processed state |
EN 10111 | 1993 - 06 | Continuously hot-rolled low carbon steel sheet and strip for cold bending; technical delivery conditions |
EN 10113 - 1 | 1993 - 03 | Hot-rolled products in weldable fine grain structural steels; part 1: general delivery conditions |
EN 10113 - 2 | 1993 - 03 | Hot-rolled products in weldable fine grain structural steels; part 2: delivery conditions for normalized/normalized rolled steels |
EN 10113 - 3 | 1993 - 03 | Hot-rolled products in weldable fine grain structural steels; part 3: delivery conditions for thermomechanical rolled steels |
EN 10120 | 1994 - 06 | Steel sheet and strip for welded gas cylinders |
EN 10126 | 1995 - 12 | Cold rolled electrical non-alloyed steel sheet and strip delivered in semi-processed state |
EN 10130 | 1991 - 03 | Cold rolled low carbon steel flat products for cold forming; technical delivery conditions |
EN 10130/A1 | 1995 - 03 | Cold rolled low carbon steel flat products for cold forming; -Technical delivery conditions |
EN 10137 - 2 | 1995 - 09 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
EN 10131 | 1991 - 11 | Cold rolled uncoated low carbon high yield strength steel flat products for cold forming;tolerances on dimensions and shape |
EN 10137 - 1 | 1995 - 09 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions |
EN 10137 - 2 | 1995 - 09 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
EN 10137 - 3 | 1995 - 09 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels |
EN 10138 - 1 | 1991 - 11 | Prestressing steels; part 1: general requirements |
EN 10138 - 2 | 1991 - 11 | Prestressing steels; part 2: stress relieved cold drawn wire |
EN 10138 - 3 | 1991 - 11 | Prestressing steels; part 3: strand |
EN 10138 - 4 | 1991 - 11 | Prestressing steels; part 4: hot rolled and processed bars |
EN 10138 - 5 | 1991 - 11 | Prestressing steels; part 5: quenched and tempered wire |
EN 10139 | 1992 - 10 | Cold rolled uncoated mild steel narrow strip for cold forming; technical delivery conditions |
EN 10140 | 1992 - 10 | Cold rolled narrow steel strip; tolerances on dimensions and shape |
EN 10142 | 1996 - 08 | Continously hot-dip zinc coated low carbon steel sheet and strip for cold forming; technical delivery conditions |
EN 10143 | 1993 - 01 | Continously hot-dip metal coated steel sheet and strip; tolerances on dimensions and shape |
EN 10147 | 1991 - 11 | Continously hot-dip zinc coated unalloyed structural steel sheet and strip; technical delivery conditions |
EN 10147/A1 | 1995 - 06 | Continously hot-dip zinc coated structural steel strip and sheet - Technical delivery conditions; Amendment A1 |
EN 10149 - 1 | 1995 - 09 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions |
EN 10149 - 2 | 1995 - 09 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels |
EN 10149 - 3 | 1995 - 09 | Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels |
EN 10152 | 1993 - 10 | Electrolytically zinc coated cold rolled steel flat products; technical delivery conditions |
EN 10154 | 1995 - 10 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions |
EN 10155 | 1993 - 06 | Structural steels with improved atmospheric corrosion resistance; technical delivery conditions |
EN 10163 - 1 | 1991 - 08 | Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 1: general requirements |
EN 10163 - 2 | 1991 - 08 | Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 2: plate and wide flats |
EN 10163 - 3 | 1991 - 08 | Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: sections |
EN 10163 - 4 | 1991 - 09 | Delivery requirements for surface quality of hot rolled steel products; part 4: round bars and wire rod |
EN 10164 | 1993 - 06 | Steel products with improved deformation properties perpendicular of the product; technical delivery conditions |
EN 10165 | 1995 - 12 | Cold rolled electrical alloyed steel sheet and strip delivered in semi - processed state |
EN 10169 - 1 | 1995 - 08 | Continuously organic coated steel flat products - Part 1: General information (definitions, materials, tolerances, test methods ) |
EN 10169 - 2 | 1995 - 10 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
EN 10173 | 1987 - 03 | Double cold reduced electrolytic chromium/chromium oxide coated steel; coil for subsequent cutting into sheets |
EN 10202 | 1996 - 08 | Cold reduced electrolytic chromium/chromium oxide coated steel |
EN 10203 | 1991 - 08 | Cold reduced electrolytic tinplate |
EN 10204 | 1996 - 01 | Metallic products; types of inspection documents |
EN 10204/A1 | 1996 - 01 | Metallic products-Types of inspection documents; Amendment A1 |
EN 10205 | 1991 - 11 | Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel |
EN 10207 | 1991 - 11 | Steels for simple pressure vessels; technical delivery requirements for plates, strips and bars |
EN 10208 - 1 | 1992 - 11 | Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 1: pipes of requirement class A |
EN 10208 - 2 | 1996 - 09 | Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 2: pipes of requirement class B |
EN 10209 | 1996 - 10 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
EN 10210 - 1 | 1994 - 03 | Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 1: technical delivery requirements |
EN 10210 - 2 | 1992 - 09 | Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 2: tolerances, dimension and sectional properties |
EN 10213 - 1 | 1995 - 12 | Technical delivery conditions for steel castings for pressure purposes - Part 1: General |
EN 10213 - 2 | 1995 - 12 | Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures |
EN 10213 - 3 | 1995 - 12 | Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures |
EN 10213 - 4 | 1995 - 12 | Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic - ferritic steel grades |
EN 10214 | 1995 - 02 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions |
EN 10215 | 1995 - 02 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions |
EN 10216-1 | 1995 - 11 | Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: non-alloy steel with specified room temperature properties |
EN 10217 - 1 | 1991 - 02 | Welded steel tubes for pressure purposes; technical delivery conditions; part 1: non -alloy steel with specified room temperature properties |
EN 10218 - 1EN 10218 - 2 | 1994 - 031995 - 11 | Steel wire and wire products; general; part 1: test methodsSteel wire and wire products; general; part 2: wire dimensions and tolerances |
EN 10219 - 1 | 1992 - 09 | Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements |
EN 10219 - 2 | 1992 - 09 | Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties |
ENV 10220 | 1993 - 11 | Seamless and welded steel tubes; dimensions and masses per unit length |
EN 10221 | 1995 - 11 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
EN 10222 - 1 | 1994 - 06 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
EN 10222 - 3 | 1994 - 06 | Steel forgings for pressure purposes - Part 3: Ferritic and martensitic steels with elevated temperature properties |
EN 10222 - 4 | 1994 - 06 | Steel forgings for pressure purposes - Part 4: Nickel steels with specified low temperature properties |
EN 10222 - 5 | 1994 - 06 | Steel forgings for pressure purposes - Part 5: Fine grain steels with high proof stress |
EN 10222 - 6 | 1994 - 06 | Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels |
EN 10223 - 1 | 1993 - 02 | Steel wire and wire products for fences; part 1: zinc and zinc-alloy coated steel barbed wire |
EN 10223 - 2 | 1993 - 04 | Steel wire and wire products for fences; part 2: hexagonal steel wire netting for agricultural, insulation, and fencing purposes |
EN 10223 - 3 | 1993 - 04 | Steel wire and wire products for fences; part 3: hexagonal steel wire netting for engineering purposes |
EN 10223 - 4 | 1994 -10 | Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing |
EN 10223 - 5 | 1994 -10 | Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted joint stock fencing |
EN 10223 - 6 | 1994 -10 | Steel wire and wire products for fences - Part 6: Steel wire chain link fencing |
EN 10224 | 1995 - 05 | Steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption |
EN 10225 | 1994 - 10 | Weldable structural steels for fixed offshore structures |
EN 10226 - 1 | 1995 -11 | Pipe threads where pressure tight joints are made on the threads - Part 1: Designation, dimensions and tolerances |
EN 10229 | 1995 - 08 | Evaluation of resistance of steel products to hydrogen induced cracking (HIC) |
EN 10230 | 1993 - 02 | Steel wire and wire products; common, special and loose feed stock steel wire machine nails |
EN 10238 | 1995 - 12 | Automatically blast cleaned and primed steel products |
EN 10240 | 1994 - 06 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings |
EN 10241 | 1994 - 06 | Threaded steel fittings |
EN 10242 | 1994 - 11 | Threaded pipe fitting in malleable cast iron |
EN 10243 - 1 | 1995 - 08 | Steel drop and press forgings - Tolerances on dimensions |
EN 10243 - 2 | 1995 - 08 | Steel upset forgings made on horizontal forging machines -Tolerances on dimensions |
EN 10244 - 1 | 1995 - 01 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles |
EN 10244 - 2 | 1995 - 01 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings on steel wire |
EN 10244 - 3 | 1995 - 01 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings |
EN 10244 - 4 | 1995 - 01 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings |
EN 10244 - 5 | 1995 - 01 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings |
EN 10244 - 6 | 1995 - 01 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings |
EN 10245 - 1 | 1995 - 01 | Steel wire and wire products - Organic coatings on wire -Part 1: General rules |
EN 10245 - 2 | 1995 - 01 | Steel wire and wire products - Organic coatings on wire -Part 2: PVC coated wire |
EN 10245 - 3 | 1995 - 01 | Steel wire and wire products - Organic coatings on wire -Part 3: PE coated wire |
EN 10248 - 1 | 1995 - 06 | Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EN 10248 - 2 | 1995 - 06 | Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
EN 10249 - 1 | 1995 - 06 | Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EN 10249 - 2 | 1995 - 06 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
EN 10253 - 1 | 1994 - 01 | Butt; welding pipe fittings wrought carbon steel without specific inspection requirements |
EN 10254 | 1995 - 08 | Steel closed die forgings - General technical delivery conditions |
EN 10255 | 1996 - 01 | Non-alloy steel tubes suitable for welding or threading |
EN 10257 - 1 | 1994 - 11 | Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 1: Land cables |
EN 10257 - 2 | 1994 - 11 | Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 2: Submarine cables |
EN 10267 | 1995 - 08 | Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures |
EN 10268 | 1995 - 10 | Cold-rolled flat products made of high field strength steels for cold forming - General delivery conditions |
EN 10271 | 1996 - 03 | Electrolyticaly zinc-nickel (ZN) coated cold roled steel flat products - Tehnical delvery conditions |
EN 10283 | 1996 - 04 | Corrosion resistant steel casting |
EN 10284 | 1996 - 04 | Malleable cast iron fittings with commresion ends for plastics piping system |
EN 10285 | 1996 - 12 | Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coating |
EN 10286 | 1996 - 12 | Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings |
EN 10287 | 1996 - 12 | Steel tubes and fittings for on and offshore pipelines - External fused polyethylene based coatings |
EN 10288 | 1997 - 01 | Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings |
EN 20049 - 01 | 1991 - 12 | Melleable cast iron threaded pipe fittings; part 1: fittings with parallel internal and taper external threads in accordance with ISO 7-1 |
EN 29658 | 1991 - 12 | Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658 :1990) |
EN ISO 945 | 1994 - 07 | Cast iron - Designation of microstructure of graphite (ISO 945 : 1975) |
EN ISO 1127 | 1995 - 10 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
EN ISO 3785 | 1995 - 01 | Steel - Designation of test piece axes (ISO 3785 : 1976) |
EN ISO 8434 - 1 | 1995 - 05 | Metallic tube connections for fluid power and general use - Part 1: 24 < Grad > compression fittings (ISO 8434-1:1994) |
EN ISO 10380 | 1995 - 05 | Corrugated flexible metallic hose and hose assemblies (ISO 10380 : 1994) |
Total Materia is the leading materials information platform, providing the most extensive information on metallic and non-metallic material properties and other material records.
All this information is available in Total Materia Horizon, the ultimate materials information and selection tool, providing unparalleled access to over 540,000 materials as well as, curated and updated reference data.
Total Materia Horizon includes: