گسترده ترین کلید فولاد، فلزات و مواد در دنیا
Language
Language
Choose language

ASTM Standard List - Structural and Constructional Steels Standards: Part Two

Abstract:

ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.

This article contains a list of standards that covers among other things:

  • Specific steel standards for applications in the construction industry
  • Centrifugally cast steel pipes for use at elevated temperatures
  • Numerous standards covering wires, chains and anti-friction bearings

For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.

Structural and Constructional Steels: Part Two


Standard
Number		 Last
version		 Description Status
A 230/A 230M 2005 Steel Wire, Oil-Tempered Carbon Valve Spring Quality /1/
A 231/A 231M 2004 Chromium-Vanadium Alloy Steel Spring Wire /1/
A 232/A 232M 2005 Chromium-Vanadium Alloy Steel Valve Spring Quality Wire /1/
A 241   Hot-Worked High-Carbon Steel Tie Plates Replaced by A 67 /no materials/
A 242/A 242M 2009 High-Strength Low-Alloy Structural Steel /1/
A 244   Multiple-Wear Wrought Steel Wheels Replaced by A 504/A 504M /no materials/
A 245   Flat-Rolled Carbon Steel Sheets of Structural Quality Replaced by A 570/A 570M /no materials/
A 246   Light Gage Structural Quality Flat Rolled Carbon-Steel Sheets Replaced by A 245 /no materials/
A 248   Carbon-Steel and Alloy-Steel Blooms, Billets, and Slabs for Forgings Replaced by A 273 /no materials/
A 250/A 250M 2005 Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes /7/
A 251   Iron and Steel Gas-Welding Rods Withdrawn 1970 /no materials/
A 252   Welded and Seamless Steel Pipe Piles /3/
A 253   Welded and Seamless Open-Hearth Iron Pipe Withdrawn 1962 /no materials/
A 254 2007 Copper-Brazed Steel Tubing /1/
A 261   Heat-Treated Carbon-Steel Bolting Material Withdrawn 1966 /no materials/
A 268/A 268M 2005 Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service /46/
A 269 2008 Seamless and Welded Austenitic Stainless Steel Tubing for General Service /46/
A 273   Carbon-Steel Blooms, Billets, and Slabs for Forgings Replaced by A 711 /no materials/
A 274   Alloy-Steel Blooms, Billets, and Slabs for Forgings Replaced by A 711 /no materials/
A 280   Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures Replaced by A 335/ A 335M /no materials/
A 281   Mild to Medium Strength Carbon-Steel Castings for General Application Replaced by A 27/ A27M /no materials/
A 283/A 283M 2007 Low and Intermediate Tensile Strength Carbon Steel Plates /4/
A 284/A 284M 1990 Low and Intermediate Tensile Strength Carbon-Silicon Steel Plates for Machine Parts and General Construction /2/
A 285/A 285M 2007 Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength /3/
A 286   Heat-Treated Alloy-Steel Bars Replaced by A 434 /no materials/
A 287   Rolled Carbon-Steel Locomotive Frames Withdrawn 1955 /no materials/
A 295/A 295M 2009 High-Carbon Anti-Friction Bearing Steel /6/
A 300   Notch Toughness Requirements for Normalized Steel Plates for Pressure Vessels Withdrawn 1975 /no materials/
A 301   Chromium-Molybdenum Steel Plates for Boilers and Other Pressure Vessels Replaced by A 387/ A 387M /no materials/
A 302/A 302M 2007 Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel /4/
A 303   Hot-Rolled Carbon Steel Strip of Structural Quality Replaced by A 570/ A 570M /no materials/
A 304 2005 Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements /103/
A 305   Minimum Requirements for the Deformations of Deformed Steel Bars for Concrete Reinforcement Replaced by A 615/ A 615M /no materials/
A 306   Carbon Steel Bars Subject to Mechanical Property Requirements Replaced by A 663/ A 663M /no materials/
A 307   Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength /3/
A 310   Flat-Rolled Electrical Steel Replaced by A 345 /no materials/
A 311/A 311M 2004 Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements /18/
A 315   Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures Replaced by A 335/ A 335M /no materials/
A 321 2001 Steel Bars, Carbon, Quenched and Tempered Withdrawn 2007 /1/
A 322 2007 Steel Bars, Alloy, Standard Grades /71/
A 325 2009 Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength /11/
A 325M 2009 Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] /11/
A 328/A 328M 2007 Steel Sheet Piling /1/
A 329   Heat-Treated Steel Tires Replaced by A 551/ A 551M /no materials/
A 331 2000 Steel Bars, Alloy, Cold-Finished Replaced by A 108 /no materials/
A 333/A 333M 2005 Seamless and Welded Steel Pipe for Low-Temperature Service /9/
A 334/A 334M 2004 Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service /7/
A 335/A 335M 2009 Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service /18/
A 345 2009 Flat-Rolled Electrical Steels for Magnetic Applications /no materials/
A 353/A 353M 2009 Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered /1/
A 354 2007 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners /2/
A 355 2006 Steel Bars, Alloys, for Nitriding /4/
A 357   Pressure Vessel Plates, Alloy Steel, Five Percent Chromium, 0.5 percent Molybdenum Replaced by A 387/ A 387M /no materials/
A 364   Cold-Finished Heat-Treated Alloy-Steel Bars Replaced by A 434
A 365   Cold-Rolled Carbon Steel, Drawing Quality, and Special Killed Replaced by A 619/ A 619M /no materials/
A 366/A 366M 1997 Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled Replaced by A 1008/ A 1008M /4/
A 373   Structural Steel for Welding Replaced by A 36/A36M /no materials/
A 374   High-Strength Low-Alloy Cold-Rolled Steel Sheets and Strip Replaced by A 606 /no materials/
A 375   High-Strength Low-Alloy Hot-Rolled Steel Sheets and Strip Replaced by A 606 /no materials/
A 378   Flat-Rolled Electrical Steel Replaced by A 345 /no materials/
A 379   Flat-Rolled Electrical Steel Replaced by A 345 /no materials/
A 381 2005 Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems /9/
A 382   Cold-Drawn Wrought Iron Heat-Exchanger and Condenser Tubes Withdrawn 1971 /no materials/
A 383 1987 Non heat treated axles for passenger, freight, tender and locomotive trucks /1/
A 391/A 391M 2007 Grade 80 Alloy Steel Chain /1/
A 397 2006 High Tensile Strength Carbon-Manganeses Steel Plates for Unfired Pressure Vessels /no materials/
A 400 2006 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties /no materials/
A 401/A 401M 2003 Steel Wire, Chromium-Silicon Alloy /1/
A 405 1991 Seamless Ferritic Alloy-Steel Pipe Specially Heat Treated for High-Temperature Service Withdrawn 1995 /1/
A 406   High-Strength Structural Alloy Rivet Steel Withdrawn 1965 /no materials/
A 407 2007 Steel Wire, Cold-Drawn, for Coiled-Type Springs /13/
A 407M   Steel Wire, Cold-Drawn, for Coiled-Type Springs [Metric] Withdrawn 1989 /no materials/
A 408   Special Large Size Deformed Billet-Steel Bars for Concrete Reinforcement Replaced by A 615/A 615M /no materials/
A 413/A 413M 2007 Carbon Steel Chain /3/
A 414/A 414M 2009 Steel, Sheet, Carbon, for Pressure Vessels /7/
A 415   Hot-Rolled Carbon Steel Sheets, Commercial Quality Replaced by A 569/A 569M /no materials/
A 416/A 416M 2006 Steel Strand, Uncoated Seven-Wire for Prestressed Concrete /2/
A 417 1998 Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units /4/
A 419   Electric-Fusion (Arc)- Welded Wrought Iron Plate pipe Withdrawn 1971 /no materials/
A 420/A 420M 2007 Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service /4/
A 421/A 421M 2005 Uncoated Stress-Relieved Steel Wire for Prestressed Concrete /2/
A 422 1964 Butt Welds in Still Tubes for Refinery Service Withdrawn 1994 /no materials/
A 423/A 423M 2009 Seamless and Electric-Welded Low-Alloy Steel Tubes /2/
A 424 2009 Steel, Sheet, for Porcelain Enameling /3/
A 425   Hot-Rolled Carbon Steel Strip, Commercial Quality Replaced by A 569/A 569M /no materials/
A 426/A 426M 2008 Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service /25/
A 427 2007 Wrought Alloy Steel Rolls for Cold and Hot Reduction /no materials/
A 431   High-Strength Deformed Billet-Steel Bars for Concrete Reinforcement with 75,000 psi Minimum Yield Strength Replaced by A 615/A 615M /no materials/
A 432   Deformed Billet Steel Bars for Concrete Reinforcement with 60,000 psi Minimum Yield Point Withdrawn 1968 /no materials/
A 433   Leaded, Carbon Steel Plates for Pressure Vessels Withdrawn 1972 /no materials/
A 434 2006 Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered /3/
A 440   High-Strength Structural Steel Withdrawn 1979 /1/
A 441/A 441M   High-Strength Low-Alloy Structural Manganese Vanadium Steel Withdrawn 1989 /1/
A 442/A 442M 1974 Pressure Vessel Plates, Carbon Steel, Improved Transition Properties Withdrawn 1991
A 449 2007 Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use /8/
A 450/A 450M 2009 General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes /no materials/
A 451/A 451M 2006 Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service /13/
A 452 1988 Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service Withdrawn 1995 /3/
A 453/A 453M 2008 High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels /4/
A 454   Steel Conveyor Chain Withdrawn 1980 /no materials/
A 455/A 455M 2007 Pressure Vessel Plates, Carbon Steel, High-Strength Manganese /1/
A 457   Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Plate, Sheet, and Strip for High Strength at Elevated Temperatures Withdrawn 1990 /1/
A 458   Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures Withdrawn 1991 /no materials/
A 460 2004 Copper-Clad Steel Wire Strand /no materials/
A 466/A 466M 2007 Weldless Chain /no materials/
A 467/A 467M 2007 Machine and Coil Chain /1/
A 485 2003 High Hardenability Antifriction Bearing Steel /no materials/

Date Published: Apr-2011

به رایگان استفاده کنید

Search Knowledge Base

Enter a phrase to search for:

Search by

Full text
Keywords

Headings
Abstracts

With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.

solution img

By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from ASTM by selecting this SDO from the popup.

solution img

The result list consists of over 3000 ASTM metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.

solution img

By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.

solution img

From the list of materials, you can review detailed properties and equivalents of each material.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.