Bize Ulaşın
Malzeme Zorluklarınızı Çözün
Nasıl yardımcı olabileceğimizi öğrenin
ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.
This article contains a list of standards that covers among other things:
For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.
| Standard Number |
Last version |
Description | Status |
| A 230/A 230M | 2005 | Steel Wire, Oil-Tempered Carbon Valve Spring Quality | /1/ |
| A 231/A 231M | 2004 | Chromium-Vanadium Alloy Steel Spring Wire | /1/ |
| A 232/A 232M | 2005 | Chromium-Vanadium Alloy Steel Valve Spring Quality Wire | /1/ |
| A 241 | Hot-Worked High-Carbon Steel Tie Plates | Replaced by A 67 /no materials/ | |
| A 242/A 242M | 2009 | High-Strength Low-Alloy Structural Steel | /1/ |
| A 244 | Multiple-Wear Wrought Steel Wheels | Replaced by A 504/A 504M /no materials/ | |
| A 245 | Flat-Rolled Carbon Steel Sheets of Structural Quality | Replaced by A 570/A 570M /no materials/ | |
| A 246 | Light Gage Structural Quality Flat Rolled Carbon-Steel Sheets | Replaced by A 245 /no materials/ | |
| A 248 | Carbon-Steel and Alloy-Steel Blooms, Billets, and Slabs for Forgings | Replaced by A 273 /no materials/ | |
| A 250/A 250M | 2005 | Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | /7/ |
| A 251 | Iron and Steel Gas-Welding Rods | Withdrawn 1970 /no materials/ | |
| A 252 | Welded and Seamless Steel Pipe Piles | /3/ | |
| A 253 | Welded and Seamless Open-Hearth Iron Pipe | Withdrawn 1962 /no materials/ | |
| A 254 | 2007 | Copper-Brazed Steel Tubing | /1/ |
| A 261 | Heat-Treated Carbon-Steel Bolting Material | Withdrawn 1966 /no materials/ | |
| A 268/A 268M | 2005 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | /46/ |
| A 269 | 2008 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service | /46/ |
| A 273 | Carbon-Steel Blooms, Billets, and Slabs for Forgings | Replaced by A 711 /no materials/ | |
| A 274 | Alloy-Steel Blooms, Billets, and Slabs for Forgings | Replaced by A 711 /no materials/ | |
| A 280 | Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures | Replaced by A 335/ A 335M /no materials/ | |
| A 281 | Mild to Medium Strength Carbon-Steel Castings for General Application | Replaced by A 27/ A27M /no materials/ | |
| A 283/A 283M | 2007 | Low and Intermediate Tensile Strength Carbon Steel Plates | /4/ |
| A 284/A 284M | 1990 | Low and Intermediate Tensile Strength Carbon-Silicon Steel Plates for Machine Parts and General Construction | /2/ |
| A 285/A 285M | 2007 | Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | /3/ |
| A 286 | Heat-Treated Alloy-Steel Bars | Replaced by A 434 /no materials/ | |
| A 287 | Rolled Carbon-Steel Locomotive Frames | Withdrawn 1955 /no materials/ | |
| A 295/A 295M | 2009 | High-Carbon Anti-Friction Bearing Steel | /6/ |
| A 300 | Notch Toughness Requirements for Normalized Steel Plates for Pressure Vessels | Withdrawn 1975 /no materials/ | |
| A 301 | Chromium-Molybdenum Steel Plates for Boilers and Other Pressure Vessels | Replaced by A 387/ A 387M /no materials/ | |
| A 302/A 302M | 2007 | Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | /4/ |
| A 303 | Hot-Rolled Carbon Steel Strip of Structural Quality | Replaced by A 570/ A 570M /no materials/ | |
| A 304 | 2005 | Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements | /103/ |
| A 305 | Minimum Requirements for the Deformations of Deformed Steel Bars for Concrete Reinforcement | Replaced by A 615/ A 615M /no materials/ | |
| A 306 | Carbon Steel Bars Subject to Mechanical Property Requirements | Replaced by A 663/ A 663M /no materials/ | |
| A 307 | Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | /3/ | |
| A 310 | Flat-Rolled Electrical Steel | Replaced by A 345 /no materials/ | |
| A 311/A 311M | 2004 | Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements | /18/ |
| A 315 | Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures | Replaced by A 335/ A 335M /no materials/ | |
| A 321 | 2001 | Steel Bars, Carbon, Quenched and Tempered | Withdrawn 2007 /1/ |
| A 322 | 2007 | Steel Bars, Alloy, Standard Grades | /71/ |
| A 325 | 2009 | Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength | /11/ |
| A 325M | 2009 | Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] | /11/ |
| A 328/A 328M | 2007 | Steel Sheet Piling | /1/ |
| A 329 | Heat-Treated Steel Tires | Replaced by A 551/ A 551M /no materials/ | |
| A 331 | 2000 | Steel Bars, Alloy, Cold-Finished | Replaced by A 108 /no materials/ |
| A 333/A 333M | 2005 | Seamless and Welded Steel Pipe for Low-Temperature Service | /9/ |
| A 334/A 334M | 2004 | Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | /7/ |
| A 335/A 335M | 2009 | Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | /18/ |
| A 345 | 2009 | Flat-Rolled Electrical Steels for Magnetic Applications | /no materials/ |
| A 353/A 353M | 2009 | Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered | /1/ |
| A 354 | 2007 | Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners | /2/ |
| A 355 | 2006 | Steel Bars, Alloys, for Nitriding | /4/ |
| A 357 | Pressure Vessel Plates, Alloy Steel, Five Percent Chromium, 0.5 percent Molybdenum | Replaced by A 387/ A 387M /no materials/ | |
| A 364 | Cold-Finished Heat-Treated Alloy-Steel Bars | Replaced by A 434 | |
| A 365 | Cold-Rolled Carbon Steel, Drawing Quality, and Special Killed | Replaced by A 619/ A 619M /no materials/ | |
| A 366/A 366M | 1997 | Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled | Replaced by A 1008/ A 1008M /4/ |
| A 373 | Structural Steel for Welding | Replaced by A 36/A36M /no materials/ | |
| A 374 | High-Strength Low-Alloy Cold-Rolled Steel Sheets and Strip | Replaced by A 606 /no materials/ | |
| A 375 | High-Strength Low-Alloy Hot-Rolled Steel Sheets and Strip | Replaced by A 606 /no materials/ | |
| A 378 | Flat-Rolled Electrical Steel | Replaced by A 345 /no materials/ | |
| A 379 | Flat-Rolled Electrical Steel | Replaced by A 345 /no materials/ | |
| A 381 | 2005 | Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems | /9/ |
| A 382 | Cold-Drawn Wrought Iron Heat-Exchanger and Condenser Tubes | Withdrawn 1971 /no materials/ | |
| A 383 | 1987 | Non heat treated axles for passenger, freight, tender and locomotive trucks | /1/ |
| A 391/A 391M | 2007 | Grade 80 Alloy Steel Chain | /1/ |
| A 397 | 2006 | High Tensile Strength Carbon-Manganeses Steel Plates for Unfired Pressure Vessels | /no materials/ |
| A 400 | 2006 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties | /no materials/ |
| A 401/A 401M | 2003 | Steel Wire, Chromium-Silicon Alloy | /1/ |
| A 405 | 1991 | Seamless Ferritic Alloy-Steel Pipe Specially Heat Treated for High-Temperature Service | Withdrawn 1995 /1/ |
| A 406 | High-Strength Structural Alloy Rivet Steel | Withdrawn 1965 /no materials/ | |
| A 407 | 2007 | Steel Wire, Cold-Drawn, for Coiled-Type Springs | /13/ |
| A 407M | Steel Wire, Cold-Drawn, for Coiled-Type Springs [Metric] | Withdrawn 1989 /no materials/ | |
| A 408 | Special Large Size Deformed Billet-Steel Bars for Concrete Reinforcement | Replaced by A 615/A 615M /no materials/ | |
| A 413/A 413M | 2007 | Carbon Steel Chain | /3/ |
| A 414/A 414M | 2009 | Steel, Sheet, Carbon, for Pressure Vessels | /7/ |
| A 415 | Hot-Rolled Carbon Steel Sheets, Commercial Quality | Replaced by A 569/A 569M /no materials/ | |
| A 416/A 416M | 2006 | Steel Strand, Uncoated Seven-Wire for Prestressed Concrete | /2/ |
| A 417 | 1998 | Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units | /4/ |
| A 419 | Electric-Fusion (Arc)- Welded Wrought Iron Plate pipe | Withdrawn 1971 /no materials/ | |
| A 420/A 420M | 2007 | Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | /4/ |
| A 421/A 421M | 2005 | Uncoated Stress-Relieved Steel Wire for Prestressed Concrete | /2/ |
| A 422 | 1964 | Butt Welds in Still Tubes for Refinery Service | Withdrawn 1994 /no materials/ |
| A 423/A 423M | 2009 | Seamless and Electric-Welded Low-Alloy Steel Tubes | /2/ |
| A 424 | 2009 | Steel, Sheet, for Porcelain Enameling | /3/ |
| A 425 | Hot-Rolled Carbon Steel Strip, Commercial Quality | Replaced by A 569/A 569M /no materials/ | |
| A 426/A 426M | 2008 | Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | /25/ |
| A 427 | 2007 | Wrought Alloy Steel Rolls for Cold and Hot Reduction | /no materials/ |
| A 431 | High-Strength Deformed Billet-Steel Bars for Concrete Reinforcement with 75,000 psi Minimum Yield Strength | Replaced by A 615/A 615M /no materials/ | |
| A 432 | Deformed Billet Steel Bars for Concrete Reinforcement with 60,000 psi Minimum Yield Point | Withdrawn 1968 /no materials/ | |
| A 433 | Leaded, Carbon Steel Plates for Pressure Vessels | Withdrawn 1972 /no materials/ | |
| A 434 | 2006 | Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | /3/ |
| A 440 | High-Strength Structural Steel | Withdrawn 1979 /1/ | |
| A 441/A 441M | High-Strength Low-Alloy Structural Manganese Vanadium Steel | Withdrawn 1989 /1/ | |
| A 442/A 442M | 1974 | Pressure Vessel Plates, Carbon Steel, Improved Transition Properties | Withdrawn 1991 |
| A 449 | 2007 | Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | /8/ |
| A 450/A 450M | 2009 | General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes | /no materials/ |
| A 451/A 451M | 2006 | Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | /13/ |
| A 452 | 1988 | Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service | Withdrawn 1995 /3/ |
| A 453/A 453M | 2008 | High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels | /4/ |
| A 454 | Steel Conveyor Chain | Withdrawn 1980 /no materials/ | |
| A 455/A 455M | 2007 | Pressure Vessel Plates, Carbon Steel, High-Strength Manganese | /1/ |
| A 457 | Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Plate, Sheet, and Strip for High Strength at Elevated Temperatures | Withdrawn 1990 /1/ | |
| A 458 | Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures | Withdrawn 1991 /no materials/ | |
| A 460 | 2004 | Copper-Clad Steel Wire Strand | /no materials/ |
| A 466/A 466M | 2007 | Weldless Chain | /no materials/ |
| A 467/A 467M | 2007 | Machine and Coil Chain | /1/ |
| A 485 | 2003 | High Hardenability Antifriction Bearing Steel | /no materials/ |
Total Materia, metalik ve metalik olmayan malzeme özellikleri ve diğer malzeme kayıtları hakkında en kapsamlı bilgileri sağlayan lider malzeme bilgi platformudur.
Tüm bu bilgiler, 540.000'den fazla malzemeye benzersiz erişimin yanı sıra seçilmiş ve güncellenmiş referans verileri sağlayan nihai malzeme bilgi ve seçim aracı Total Materia Horizon'da mevcuttur.
Toplam Materia Horizon şunları içerir: