Group of ASTM standards for steel plate, sheet, strip and wire
Abstrakt:
This group of ASTM standards covers steel plates, sheets and strips used in various applications, properties of assorted types of stainless and heat resisting steel wires, drawn galvanized wires for mechanical springs, alloy steel coarse round wires and industrial sizing screens.
This group of ASTM standards covers the requirements to be met by:
- Steel plate, sheet, and strip used in various applications
- The properties of assorted types of steel wire, e.g., stainless and heat resisting steel wire, drawn galvanized wire for mechanical springs, and alloy steel coarse round wire
- Industrial sizing screens.
STEEL PLATE, SHEET AND STRIP
|
A109
|
A109/A109M-98a
|
Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
|
|
A167
|
A167-99
|
Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
|
|
A176
|
A176-99
|
Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
|
|
A240
|
A240/A240M-00
|
Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels
|
|
A262
|
A262-98
|
Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
|
|
A263
|
A263-94a (1999)
|
Specification for Corrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip
|
|
A264
|
A264-94a (1999)
|
Specification for Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip
|
|
A265
|
A265-94a (1999)
|
Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
|
|
A345
|
A345-98
|
Specification for Flat-Rolled Electrical Steels for Magnetic Applications
|
|
A366
|
A366/A366M-97e1
|
Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled
|
|
A370
|
A370-97a
|
Test Methods and Definitions for Mechanical Testing of Steel Products
|
|
A380
|
A380-99e1
|
Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
|
|
A414
|
A414/A414M-00
|
Specification for Steel, Sheet, Carbon, for Pressure Vessels
|
|
A417
|
A417-93 (1998)
|
Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
|
|
A424
|
A424-00
|
Specification for Steel, Sheet, for Porcelain Enameling
|
|
A480
|
A480/A480M-99b
|
Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
|
A505
|
A505-00
|
Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
|
|
A506
|
A506-93 (1998)
|
Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Regular Quality and Structural Quality
|
|
A507
|
A507-93 (1998)
|
Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Drawing Quality
|
|
A568
|
A568/A568M-00
|
Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
|
|
A569
|
A569/A569M-98
|
Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
|
|
A570
|
A570/A570M-98
|
Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality
|
|
A604
|
A604-93 (1998)
|
Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
|
|
A606
|
A606-98
|
Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
|
|
A607
|
A607-98
|
Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled
|
|
A611
|
A611-97
|
Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled
|
|
A620
|
A620/A620M-97
|
Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled
|
|
A622
|
A622/A622M-97
|
Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled
|
|
A635
|
A635/A635M-98
|
Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled
|
|
A659
|
A659/A659M-97
|
Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
|
|
A666
|
A666-00
|
Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
|
|
A682
|
A682/A682M-98a
|
Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
|
|
A684
|
A684/A684M-86 (1998)
|
Specification for Steel, Strip, High-Carbon, Cold-Rolled
|
|
A693
|
A693-93 (1999)
|
Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
|
A700
|
A700-99
|
Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
|
|
A702
|
A702-89 (1994) e1
|
Specification for Steel Fence Posts and Assemblies, Hot Wrought
|
|
A715
|
A715-98
|
Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability
|
|
A749
|
A749/A749M-97
|
Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
|
|
A751
|
A751-96
|
Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
|
|
A763
|
A763-93 (1999) e1
|
Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
|
|
A793
|
A793-96
|
Specification for Rolled Floor Plate, Stainless Steel
|
|
A794
|
A794-97
|
Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
|
|
A829
|
A829/A829M-95
|
Specification for Alloy Structural Steel Plates
|
STEEL WIRE
|
A227
|
A227/A227M-99
|
Specification for Steel Wire, Cold-Drawn for Mechanical Springs
|
|
A228
|
A228/A228M-93
|
Specification for Steel Wire, Music Spring Quality
|
|
A229
|
A229/A229M-99
|
Specification for Steel Wire, Oil-Tempered for Mechanical Springs
|
|
A230
|
A230/A230M-99
|
Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
|
|
A231
|
A231/A231M-96
|
Specification for Chromium-Vanadium Alloy Steel Spring Wire
|
|
A232
|
A232/A232M-99
|
Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
|
|
A313
|
A313/A313M-98
|
Specification for Stainless Steel Spring Wire
|
|
A368
|
A368-95a
|
Specification for Stainless Steel Wire Strand
|
|
A401
|
A401/A401M-98
|
Specification for Steel Wire, Chromium-Silicon Alloy
|
|
A407
|
A407-93 (1998)
|
Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
|
|
A478
|
A478-97
|
Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
|
|
A492
|
A492-95
|
Specification for Stainless Steel Rope Wire
|
|
A493
|
A493-95
|
Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
|
|
A510M
|
A510M-00
|
Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
|
|
A510
|
A510-00
|
Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
|
|
A555
|
A555/A555M-97
|
Specification for General Requirements for Stainless Steel Wire and Wire Rods
|
|
A580
|
A580/A580M-98
|
Specification for Stainless Steel Wire
|
|
A581
|
A581/A581M-95b
|
Specification for Free-Machining Stainless Steel Wire and Wire Rods
|
|
A679
|
A679/A679M-00
|
Specification for Steel Wire, High Tensile Strength, Cold Drawn
|
|
A713
|
A713-93 (1998)
|
Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
|
|
A752M
|
A752M-93 (1998)
|
Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
|
|
A752
|
A752-93 (1998)
|
Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
|
|
A764
|
A764-95
|
Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
|
|
A805
|
A805-93 (1998)
|
Specification for Steel, Flat Wire, Carbon, Cold-Rolled
|
Durchforschen Sie bitte den Informationsteil der Datenbank
|
|
|
Mit der Total Materia Datenbank, können Sie durch nur einen Klick Informationen zu Metallnormen, deren aktuellen Status sowie den beschriebenen Werkstoffen finden. In Sekundenschnelle, ist es auch möglich, betreffende Werkstoffeigenschaften zu sehen oder, über die Liste der Normen, ähnliche Werkstoffe zu finden. Zu Anfang, klicken Sie auf den "Norm" Button in der Menüleiste. Geben Sie dann einfach den Namen einer Normentwicklungsgesellschaft (SDO) oder eine Normnummer ein, und Sie erhalten sofort Ergebnisse unserer mehrsprachigen Datenbank, welche über 30 000 Normen enthält. So können Sie zum Beispiel alle Metallnormen von ASTM sehen, indem Sie diese SDO aus der Liste auswählen. Die Ergebnisliste enthält über 3000 Werkstoffe ASTM Metallnormen. Die Informationen beinhalten: Normbeschreibung, letztes Jahr der Ausgabe, gegenwärtigen Status (gültig, ersetzt, etc.) und einen Link zu den Werkstoffen welche von dieser Norm beschrieben werden. Wenn Sie auf diesen Link klicken, können Sie eine Liste mit den Werkstoffen sehen, welche durch diese Norm beschrieben werden. Über diese Werkstoffliste, können Sie dann die Detaillierten Eigenschaften sehen und für jeden Wekstoff Äquivalenzen finden. Um unsere Datenbank auszuprobieren, laden wir Sie ein sich unserer Nutzergemeinschaft von über 150 000 angemeldeten Benutzern, mit einem kostenlosen Probeaboanzuschliessen.
|