This group of ASTM standards covers steel plates, sheets and strips used in various applications, properties of assorted types of stainless and heat resisting steel wires, drawn galvanized wires for mechanical springs, alloy steel coarse round wires and industrial sizing screens.
A109 | A109/A109M-98a | Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
A167 | A167-99 | Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
A176 | A176-99 | Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
A240 | A240/A240M-00 | Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels |
A262 | A262-98 | Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
A263 | A263-94a (1999) | Specification for Corrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip |
A264 | A264-94a (1999) | Specification for Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip |
A265 | A265-94a (1999) | Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate |
A345 | A345-98 | Specification for Flat-Rolled Electrical Steels for Magnetic Applications |
A366 | A366/A366M-97e1 | Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled |
A370 | A370-97a | Test Methods and Definitions for Mechanical Testing of Steel Products |
A380 | A380-99e1 | Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
A414 | A414/A414M-00 | Specification for Steel, Sheet, Carbon, for Pressure Vessels |
A417 | A417-93 (1998) | Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units |
A424 | A424-00 | Specification for Steel, Sheet, for Porcelain Enameling |
A480 | A480/A480M-99b | Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A505 | A505-00 | Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
A506 | A506-93 (1998) | Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Regular Quality and Structural Quality |
A507 | A507-93 (1998) | Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Drawing Quality |
A568 | A568/A568M-00 | Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
A569 | A569/A569M-98 | Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality |
A570 | A570/A570M-98 | Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality |
A604 | A604-93 (1998) | Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets |
A606 | A606-98 | Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance |
A607 | A607-98 | Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled |
A611 | A611-97 | Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled |
A620 | A620/A620M-97 | Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled |
A622 | A622/A622M-97 | Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled |
A635 | A635/A635M-98 | Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled |
A659 | A659/A659M-97 | Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled |
A666 | A666-00 | Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
A682 | A682/A682M-98a | Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For |
A684 | A684/A684M-86 (1998) | Specification for Steel, Strip, High-Carbon, Cold-Rolled |
A693 | A693-93 (1999) | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A700 | A700-99 | Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment |
A702 | A702-89 (1994) e1 | Specification for Steel Fence Posts and Assemblies, Hot Wrought |
A715 | A715-98 | Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability |
A749 | A749/A749M-97 | Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
A751 | A751-96 | Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
A763 | A763-93 (1999) e1 | Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
A793 | A793-96 | Specification for Rolled Floor Plate, Stainless Steel |
A794 | A794-97 | Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled |
A829 | A829/A829M-95 | Specification for Alloy Structural Steel Plates |
A227 | A227/A227M-99 | Specification for Steel Wire, Cold-Drawn for Mechanical Springs |
A228 | A228/A228M-93 | Specification for Steel Wire, Music Spring Quality |
A229 | A229/A229M-99 | Specification for Steel Wire, Oil-Tempered for Mechanical Springs |
A230 | A230/A230M-99 | Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
A231 | A231/A231M-96 | Specification for Chromium-Vanadium Alloy Steel Spring Wire |
A232 | A232/A232M-99 | Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
A313 | A313/A313M-98 | Specification for Stainless Steel Spring Wire |
A368 | A368-95a | Specification for Stainless Steel Wire Strand |
A401 | A401/A401M-98 | Specification for Steel Wire, Chromium-Silicon Alloy |
A407 | A407-93 (1998) | Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
A478 | A478-97 | Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
A492 | A492-95 | Specification for Stainless Steel Rope Wire |
A493 | A493-95 | Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
A510M | A510M-00 | Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] |
A510 | A510-00 | Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
A555 | A555/A555M-97 | Specification for General Requirements for Stainless Steel Wire and Wire Rods |
A580 | A580/A580M-98 | Specification for Stainless Steel Wire |
A581 | A581/A581M-95b | Specification for Free-Machining Stainless Steel Wire and Wire Rods |
A679 | A679/A679M-00 | Specification for Steel Wire, High Tensile Strength, Cold Drawn |
A713 | A713-93 (1998) | Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
A752M | A752M-93 (1998) | Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
A752 | A752-93 (1998) | Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
A764 | A764-95 | Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
A805 | A805-93 (1998) | Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
Total Materia, metalik ve metalik olmayan malzeme özellikleri ve diğer malzeme kayıtları hakkında en kapsamlı bilgileri sağlayan lider malzeme bilgi platformudur.
Tüm bu bilgiler, 540.000'den fazla malzemeye benzersiz erişimin yanı sıra seçilmiş ve güncellenmiş referans verileri sağlayan nihai malzeme bilgi ve seçim aracı Total Materia Horizon'da mevcuttur.
Toplam Materia Horizon şunları içerir: