The Tilting Rotary Process


With the major recycling objective being to recover the metallic aluminum content of scraps and residues with the highest possible yield combined with the lowest effort, the tilting rotary process gives some good advantages over the fixed axis single route.
Key in the application of recovery of aluminum, zinc, lead and platinum the advantages of the tilt rotary process includes greater safety, efficiency, and loading capacities.

Raw materials dedicated to the recycling of aluminum have to contain it in non-oxidized but metallic form. The transformation of such oxides into metal is technically and economically infeasible. The major recycling target is to recover the metallic aluminum content of scraps and residues with the highest possible yield combined with the lowest effort. Some countries, particularly those rich in electricity resources have explored the plasma torch route or electric arc type furnace; both working on a similar principal of melting in an ‘oxygen free’ environment under pressure to avoid parasite air ingress and both of these techniques offer efficient recoveries but are not economically viable unless the electrical power source is very cheap.

Also these techniques are limited to small production units (a few tonnes of dross at most). More recently other manufacturers have opted for TRF (Tilt Rotary Furnace) units fitted with oxy/fuel combustion systems - they have their advantages, the main one being the reduction of off-gas volumes but they remain complex and costly.

Tilt Rotary Furnaces have significant advantages compared to fixed axis rotary furnaces. In Figures 1 and 2 is schematically presented both processes.

Conventional fixed axis single route
1. Scrap and salt are charged into the furnace. Charging is restricted by the small charge hole.
2. The charge is melted by a single pass burner arrangement, limiting efficiency.
3. Aluminum is run out through a tap hole. Opening and closing the tap hole is slow and labor intensive.
4. Slag is run out through a second tap hole.

Figure 1: Fixed axis furnace route

A high salt-to-oxide ratio is required to ensure the slag is liquid to run through the small tap hole.

Tilt rotary process route:
1. Furnace is charged very quickly using the much larger charge opening.
2. Melting by double pass burner arrangement. Saving energy with faster melting.
3. The furnace is tilted to pour out the aluminum. The dry slag remains in the furnace – with no time wasted in opening tap hole.
4. Finally the furnace is rotated and tilted simultaneously to tip out the dry salt slag for disposal. The amount of slag is greatly reduced because a liquid slag is not needed - no time wasted opening slag hole.
5. Faster rotation - better separation of aluminum from slag.

Figure 2: Tilt rotary furnace route


  • Aluminum dross recycling
  • Zinc dross recycling
  • Aluminum light scrap recycling
  • Lead battery recycling
  • Platinum Recycling
  • Light metal processing


  • 80% increase in service, compared with rotary furnace (fixed axis), better safety, and longer service life
  • 50% increase in efficiency, compared with reverberatory furnace, production efficiency improvements
  • 5%, recycling ratio improved by 3~5%
  • 300%, loading capacity per batch upgraded by 3 times
  • 30%, reduced final aluminum dross for disposal
  • 25%, saved energy
  • 50%, reduced flux requirements
  • 50%, reduced labour, one operator can operate two furnaces, totally automatic processing

Pretražite bazu znanja

Unesite reč za pretragu:

Pretražite prema

Kompletan tekst
Ključne reči


Pretraga podataka o hemijskom sastavu materijala u Total Materia bazi ne može biti lakša.

Možete pronaći podatke o hemijskom sastavu za preko 175,000 materijala u bazi u svega nekoliko sekundi.

Unesite materijal u odgovarajuće polje Brze pretrage. Pretragu možete suziti odabirom zemlje/standarda, a nakon toga kliknite na Pretražite.

solution img

Total Materia kreira listu rezultata iz koje možete odabrati materijal koji vas zanima.
Kliknite na materijal koji ste odabrali.

solution img

Da biste videli podatke o hemijskom sastavu kliknite na link Hemijski Sastav na stranici podgrupe. Broj zapisa o hemijskom sastavu se prikazuje u zagradama pored linka.

solution img

Uz hemijski sastav prikazuju se i osnovne informacije o odabranom materijalu.

solution img

Imate priliku da isprobate Total Materia bazu podataka. Pozivamo Vas da se pridružite zajednici od preko 150,000 registrovanih korisnika kroz Total Materia Besplatan demo.