T55T5-1-NCC (Japan / JIS) Material Properties

Material group: Ferrous Alloys / Welding filler materials
Country/Standard: Japan / JIS

Data updates

Latest Update: 2014-12
Total number of updates: 1
Update History:

Mechanical Properties

Temperature

≤ 0°C
0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 460 MPa view details
Tensile Strength 550 — 740 MPa view details
Elongation, A 17 % view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
J view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
J view details
Yield Strength, Rp0.2 460 MPa view details
Tensile Strength 550 — 740 MPa view details
Elongation, A 17 % view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
J view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
J view details

Physical Properties

Since direct data is not available in the original source, register for a free trial to explore similar or equivalent materials having these properties.

Register Now

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
≤ 1.8
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
≤ 0.12
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
0.45 – 0.75
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Mn
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Ni
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3

Z 3320: 2012 / Flux cored wires for gas shielded and self-shielded metal arc welding of atmospheric corrosion resisting steel

Heat Treatments

  • Preheating temperature and interpass temperature: For test plate shall be 135-165°C; however, the frst pass may be carried out at 100-135°C. In this case, the continuous welding shall be carried out until the specified preheating temperature and interpass temperature are reached after the commencement of welding. Post-weld heat treatment: The heat treatment temperature shall be 605-635°C; The holding time shall be 60-70 min; The heating rate shall be 220°C/h or under and the cooling rate shall be 195°C/h or under at a temperature in the range of 315°C or over; Cooling at a temperature in the range of under 315°C shall be the cooling in furnace or air cooling in static air.