The CLU Converter Process

Abstract:

The CLU converter process is part of a number of modern processes which focus on driving more efficient, cost effective steelmaking and in particular through secondary refining processes.
Advantages of the CLU process include among others, temperature control and price advantage over similar processes.

High speed technology has become the necessity for steelmaking and ferro-alloys production in order to increase the productivity, reduce the production cost, and meet specific quality requirements. The new developments taken place relating to steel are as follows:

  • Increasing use of electric arc furnaces for alloy steel and stainless steel making
  • Use of ladle metallurgy for improving productivity and quality
  • AOD, CLU, VOD secondary refining practices for stainless steel and alloy steel making

As mentioned above, in steel making practices, refining of the metal and alloying processes are carried out in various vessels. The refining process in the converter involves the oxidation of excess carbon in the metal whilst increasing or keeping the levels of other elements constant.

Nowadays, stainless steel making is achieved efficiently through technologies like AOD (Argon-oxygen-decarburization) and CLU (Creusot-Loire-Uddeholm). Both processes are similar in their applications. The difference lies on the gaseous mixture used and the location of gas injection.



Figure 1: Cross section of CLU converter and CLU converter in plant operational condition

The charge of the CLU or AOD converter is composed of the hot metal from the arc furnace, fluxes and others additions such as scrap and ferro-chromium. The hot metal (crude steel) contains mostly iron, chromium, nickel, carbon and other undesirable elements such as phosphorus, sulfur and manganese. Fluxes are salts that are added to the bath for the purpose of slagging undesirable elements and balancing the heat within the bath at the optimum level.

Hot metal is formed mostly by scrap. Fluxes are dependent on the chemical nature of the slag (acid or alkaline) and the refractory wear. The gas mixture is injected through nozzles or tuyeres located at or near the bottom of the vessel to promote mixing, heat transfer and mass transfer in the bath smelting. Under these conditions; reactions take place rapidly resulting in a higher refining rate. As reactions proceed, three phases are formed in the bath namely molten steel, liquid slag and gas. The lighter phase (slag) floats on top of the heavier phase (molten steel) during the refining process. The gas mixture characteristics used in AOD and CLU are given in Table 1.



Table 1: Gas injection characteristics in AOD and CLU

Typical parameters

Typical parameters and conditions for stainless steel grades 304 and 409 for CLU process are given in Table 2.



Table 2: Typical parameters and conditions for grade 304 and grade 409

Advantages

  • The possibility of controlling the temperature during the decarburization
  • The cost of dilution gas is low
  • The process uses low priced ferrochromium (Fe-Cr) with high Si and C contents
  • The low operating temperature

Search Knowledge Base

Enter a phrase to search for:

Search by

Full text
Keywords

Headings
Abstracts

The Total Materia database contains many thousands of stainless steel materials across a large range of countries and standards.

Where available, full property information can be viewed for materials including chemical composition, mechanical properties, physical properties, advanced property data and much more.

Using the Advanced Search page, it is possible to search for materials by general application by using the Full Text Search function of Advanced Search.

It maybe that you need to further narrow the search criteria by using the other fields in the Advanced Search page e.g. Country/Standard.

Then click Submit.

solution img

Total Materia A list of materials will then be generated for you to choose from.

solution img

After clicking a material from the resulting list, a list of subgroups derived from standard specifications appears.

solution img

From here it is possible to view specific property data for the selected material and also to view similar and equivalent materials in our powerful cross reference tables.

For example, by clicking on the chemical composition link on the subgroup page it is possible to view chemical composition data for the material.

solution img

Other critical property data for stainless steels can also be viewed including mechanical properties data, physical properties, advanced property data and much more.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.