LD-ORP Optimizing Refining Process: Part Two

Sažetak:

The LD-ORP significantly shortens the tap to tap time and allows for increased heat size meaning and overall positive gain in converter productivity.
Another significant gain through implementation of LD-ORP in specific cases has been the reduction in the process consumption of CaO.

The developed method, named the LD-Optimized Refining Process (LD-ORP), comprises charging hot metal into the converter assigned for de-Si and de-P, and then, after these processes, desulfurizing it in the same vessel by blowing CaO and other desulfurizing agents from the bottom, discharging the slag, and transferring the hot metal to another converter assigned for de-C.

Through the development, introduction, and modification of the LD-ORP process, it has become possible to shorten the tap-to-tap time and increase the heat size and thereby enhance the converter productivity as shown in Figures 1 and 2. In addition, the unit consumption of CaO has been reduced as shown in Figure 3. Furthermore, because the introduction of ORP II and the installation of a furnace exclusive for desulfurization made it possible to completely omit the desulfurization treatment using torpedo cars, the turnover rate of torpedo cars has improved as shown in Figure 4.



Figure 1: Changes of tap-to-tap time at the converter by introduction of LD-ORP



Figure 2: Increase in heat size of the converter by introduction of LD-ORP



Figure 3: Reduction of lime consumption by introduction of LD-ORP



Figure 4: Changes of turnovertimes of torpedo-car

Pretražite bazu znanja

Unesite reč za pretragu:

Pretražite prema

Kompletan tekst
Ključne reči

Naslovi
Sažetak

Dijagrami termičke obrade dostupni su za veliki broj materijala u Total Materia bazi podataka.

Dijagrami termičke obrade obuhvataju kaljavost, kaljenje-otpuštanje, TTT i CCT i mogu se naći u standardnim podacima o materijalu.

Da biste odabrali materijal prema specijalnim osobinama, koristite opciju Specijalna pretraga u okviru modula Napredna pretraga.

Da biste definisali kriterijume pretrage, sve što treba da uradite je da izaberete zemlju/standard koja vas zanima iz Zemlja/Standard padajućeg menija i da označite polje Dijagram termičke obrade, smešteno u delu Specijalna pretraga u donjem delu strane Napredna pretraga.

Kliknite Potvrdite.

solution img

Nakon što odaberete materijal koji vas zanima, kliknite na link Termička obrada da vidite podatke za odabrani materijal. Broj zapisa o termičkoj obradi se prikazuje u zagradama pored linka.

solution img

Biće prikazane sve dostupne informacije o termičkoj obradi za odabrani materijal.

solution img

solution img

solution img

Imate priliku da isprobate Total Materia bazu podataka. Pozivamo Vas da se pridružite zajednici od preko 150,000 registrovanih korisnika kroz Total Materia Besplatan demo.