Production of High Nitrogen Steels: Part Two


When melting high nitrogen steels a range of challenges present themselves, not least the problem of attaining and maintaining high nitrogen content in solution within the melt.
With pressure electroslag remelting (PESR) comes the ability to increase nitrogen content beyond the solubility limit and therefore have a beneficial effect on a range of key material properties.

Nitrogen alloyed stainless steels, both austenitic and martensitic, exhibit attractive properties such as high strength and ductility, good corrosion resistance and reduced tendency to grain boundary sensitization.

The melting of high nitrogen steels (HNSS) poses two problems: how to get high nitrogen contents into the melt and how to keep it in solution during the process of solidification. Gas porosity formation takes place in the solidification stage because of the low solubility limit of nitrogen into the ferrite phase: as a consequence, the liquid is strongly enriched in nitrogen.

There are two possible ways to overcome the low solubility of nitrogen in molten iron and to achieve a high nitrogen content in the steel: alloying with elements which lower the nitrogen activity or melting under pressure.

For this reason the development of pressure electroslag remelting (PESR) is becoming a predominant interest for the production of steels having nitrogen content largely above the solubility limit under atmospheric pressure.

Energietechnik Essen GmbH has been making special forged products and pressure-nitrided alloys for many years. In order to meet the ever increasing customer demands with regard to the physical and chemical properties, such as strength, toughness and corrosion resistance, there have been further enhancements to the pressure electro slag remelting (PESR) process at the company's works in Essen so that they are now able to produce pressure-nitrided steels with outstanding property profiles on an industrial scale with the aid of this technology.

The PESR process makes it possible to increase the nitrogen content beyond the solubility limit. The advantages of an increased nitrogen content are higher hardness and better corrosion resistance. Where austenitic steels are concerned, the austenitic structure is stabilized and the tensile strength increased without reducing the toughness.

The following material qualities are produced at Energietechnik Essen GmbH at the present time:

Name Mat. No. Designation Structure
Cronidur 30 1.4108 X 30 CrMoN 15 1 Martensite
P 900 N 1.3815 X8CrMnN19-19 Austenite
P 900 N Mo 1.4456 X8CrMnMoN18-18-2 Austenite
P 2000 1.4452 X13CrMnMoN18-14-3 Austenite

The common advantages of the Pressure/Protective Gas Electroslag Remelting (PESR) process are:

  • No hydrogen pick up
  • Nitrogen alloying up to approx. 0.8%
  • Absence of ingot segregation
  • Only minor crystal segregations
  • Minimum sulphur contents
  • Minimum levels of nonmetallic inclusions
  • Excellent material properties
  • Low melting loss of elements with high oxygen afinity

As illustration Figure 1 shows the sketch of the Pressure/Protective Gas Electroslag Remelting (PESR) process.

Figure 1: Pressure/Protective Gas Electroslag Remelting (PESR) 1-Pressure sealing 2-Furnace Head 3-Extension Chamber 4-Stinger 5-Stub 6-Electrode 7-Static Mold 8-Slag 9-Liquid Metal 10-Ingot 11-Alloy Feeder; DC-Power Supply

Pretražite bazu znanja

Unesite reč za pretragu:

Pretražite prema

Kompletan tekst
Ključne reči


Ovaj članak pripada seriji članaka. Da biste pročitali više o ovoj temi, kliknite na linkove ispod.

Pretraga podataka o hemijskom sastavu materijala u Total Materia bazi ne može biti lakša.

Možete pronaći podatke o hemijskom sastavu za preko 175,000 materijala u bazi u svega nekoliko sekundi.

Unesite materijal u odgovarajuće polje Brze pretrage. Pretragu možete suziti odabirom zemlje/standarda, a nakon toga kliknite na Pretražite.

solution img

Total Materia kreira listu rezultata iz koje možete odabrati materijal koji vas zanima.
Kliknite na materijal koji ste odabrali.

solution img

Da biste videli podatke o hemijskom sastavu kliknite na link Hemijski Sastav na stranici podgrupe. Broj zapisa o hemijskom sastavu se prikazuje u zagradama pored linka.

solution img

Uz hemijski sastav prikazuju se i osnovne informacije o odabranom materijalu.

solution img

Imate priliku da isprobate Total Materia bazu podataka. Pozivamo Vas da se pridružite zajednici od preko 150,000 registrovanih korisnika kroz Total Materia Besplatan demo.