Introduction to the SAE-AISI Designation System

Sumário:

The SAE system uses a basic four-digit system to designate the chemical composition of carbon and alloy steels. The first digit (1), of this designation indicates a carbon steel; i.e., carbon steels comprise 1xxx groups in the SAE-AISI system and are subdivided into four categories due to the variance in certain fundamental properties among them.

For many years, certain grades of carbon and alloy steels have been designated by a four-digit AISI/SAE numerical index system that identified the grades according to standard chemical compositions. Since the American Iron and Steel Institute (AISI) ceased writing material specifications, the relationship between AISI and grade designations has been discontinued. From point of edition of the 1995 Iron and Steel Society (ISS) Strip Steel Manual, the four-digit designations are referred to solely as SAE Designations.

The SAE system uses a basic four-digit system to designate the chemical composition of carbon and alloy steels. The simplest system for designation of steel is schematically shown in Figure 1.



Figure 1: Schematic Representation of AISI/SAE Steel Designation System

Figure 1 demonstrates that the SAE-AISI system uses a four-digit number to designate a carbon and alloy steel and refers to its specific chemical composition. It is worth noting however, that there are also certain types of alloy steels that are designated by five digits (51XXX; 52XXX).

The first digit (1), of this designation indicates a carbon steel; i.e., carbon steels comprise 1xxx groups in the SAE-AISI system and are subdivided into four categories due to the variance in certain fundamental properties among them. Thus the plain carbon steels are comprised within the 10xx series (containing 1.00% Mn maximum); resulfurized carbon steels within the 11xx series; resulfurized and rephosphorized carbon steels within the 12xx series; and non-resulfurized high-manganeze (up-to 1.65%) carbon steels which are produced for applications requiring good machinability are comprised within the 15xx series.

The SAE-AISI system then classifies all other alloy steels using the same four digit index as follows:
2 - Nickel steels;
3 - Nickel-chromium steels;
4 - Molybdenum steels;
5 - Chromium steels;
6 - Chromium-vanadium steels;
7 - Tungsten-chromium steels;
9 - Silicon-manganese steels.

The second digit of the series indicates the concentration of the major element in percentiles (1 equals 1%). The last two digits of the series indicate the carbon concentration to 0.01%.

Example:
SAE 5130 indicates a chromium steel alloy, containing 1% of chromium and 0.30% of carbon.

Table 1 shows the SAE/AISI steel Numbering designation system

Additional letters added between the second and third digits include B when boron is added (between 0.0005 and 0.003%) for enhanced hardenability, and L when lead is added (between 0.15 and 0.35%) for enhanced machinability. The prefix M is used to designate merchant quality steel (the least restrictive quality descriptor for hot-rolled steel bars used in noncritical parts of structures and machinery). The prefix E (electric-furnace steel) and the suffix H (hardenability requirements) are mainly applicable to alloy steels. The full series of classification groups is shown in Table 2-4.

Table 1: The SAE/AISI steel numbering designation system

Carbon steels 10XX Plain carbon, Mn 1.00% max
11XX Resulfurized free machining
12XX Resulfurized/rephosphorized free machining
15XX Plain carbon, Mn 1.00-1.65%
Manganese steels 13XX Mn 1.75%
Nickel steels 23XX Ni 3.50%
25XX Ni 5.00%
Nickel-chromium steels 31XX Ni 1.25%, Cr 0.65-0.80%
32XX Ni 1.75%, Cr 1.07%
33XX Ni 3.50%, Cr 1.50-1.57%
34XX Ni 3.00%, Cr 0.77%
Molybdenum steels 40XX Mo 0.20-0.25%
44XX Mo 0.40-0.52%
Chromium-molybdenum steels 41XX Cr 0.50-0.95%, Mo 0.12-0.30%
Nickel-chromium-molybdenum steels 43XX Ni 1.82%, Cr 0.50-0.80%, Mo 0.25%
47XX Ni 1.05%, Cr 0.45%, Mo 0.20-0.35%
Nickel-molybdenum steels 46XX Ni 0.85-1.82%, Mo 0.20-0.25%
48XX Ni 3.50%, Mo 0.25%
Chromium steels 50XX Cr 0.27-0.65%
51XX Cr 0.80-1.05%
50XXX Cr 0.50%, C 1.00% min
51XXX Cr 1.02%, C 1.00% min
52XXX Cr 1.45%, C 1.00% min
Chromium-vanadium steels 61XX Cr 0.60-0.95%, V 0.10-0.015%
Tungsten-chromium steels 72XX W 1.75%, Cr 0.75%
Nickel-chromium-molybdenum steels 81XX Ni 0.30%, Cr 0.40%, Mo 0.12%
86XX Ni 0.55%, Cr 0.50%, Mo 0.20%
87XX Ni 0.55%, Cr 0.50%, Mo 0.25%
88XX Ni 0.55%, Cr 0.50%, Mo 0.35%
Silicon-manganese steels 92XX Si 1.40-2.00%, Mn 0.65-0.85%, Cr 0-0.65%
Nickel-chromium-molybdenum steels 93XX Ni 3.25%, Cr 1.20%, Mo 0.12%
94XX Ni 0.45%, Cr 0.40%, Mo 0.12%
97XX Ni 0.55%, Cr 0.20%, Mo 0.20%
98XX Ni 1.00%, Cr 0.80%, Mo 0.25%


Click on the link to see a list of AISI-SAE standards covering the following material categories:

  • Group of standards for structural and constructional steels
  • Group of standards for stainless and heat resisting steels
  • Group of standards for steel castings

Procurar conhecimento básico

Colocar uma frase para procurar por:

Procurar por

Texto completo
Palavras chaves

Títulos
Resumo

Com Total Materia, encontrar informações sobre uma especificação de metal, seu status atual e a composição química é um clique de distância.

Em poucos segundos, também é possível para você encontrar dados relacionados ao material detalhado com propriedades ou materiais equivalentes e buscar na lista de normas da Total Materia.

Para começar, clique no botão da lista de normas na barra de menu.


Simplesmente selecionando uma Organização de Desenvolvimento de Normas (SDO) e / ou digitando o número da norma, você recebe resultados imediatos do banco de dados multi-lingual contendo mais de 30.000 especificações.

Por exemplo, você pode rever todas as normas do metal SAE a partir de uma SDO selecionada no popup.


A lista de resultados consiste em mais de materiais 1600 e SAE normas de metais. As informações incluem: descrição padrão, ano da última edição, situação atual (válido, substituído, etc) e um link para os materiais definidos para esta norma.


Clicando no link de materiais, você pode ver uma lista de materiais metálicos definidos pela norma selecionada.


Na lista de materiais, você pode rever as propriedades detalhadas e equivalentes de cada material.


Para você é uma oportunidade de fazer um test drive na Total Materia, nós convidamos você a participar de uma comunidade de mais de 150.000 usuários registrados através da Total Materia Free Trial.