True Stress - True Strain Curve: Part Three

Sumário:

The parameters that are usually determined from the true stress - true strain curve include true stress at maximum load, true fracture stress, true fracture strain, true uniform strain, true local necking strain, strain-hardening exponent and strength coefficient.

True Stress at Maximum Load


The true stress at maximum load corresponds to the true tensile strength. For most materials necking begins at maximum load at a value of strain where the true stress equals the slope of the flow curve. Let su and eu denote the true stress and true strain at maximum load when the cross-sectional area of the specimen is Au. The ultimate tensile strength is given by

Eliminating Pmax yields

(1)


True Fracture Stress


The true fracture stress is the load at fracture divided by the cross-sectional area at fracture. This stress should be corrected for the, triaxial state of stress existing in the tensile specimen at fracture. Since the data required for this correction are often not available, true-fracture-stress values are frequently in error.

True Fracture Strain


The true fracture strain ef is the true strain based on the original area A0 and the area after fracture Af

(2)

This parameter represents the maximum true strain that the material can withstand before fracture and is analogous to the total strain to fracture of the engineering stress-strain curve. Since Eq. (3) is not valid beyond the onset of necking, it is not possible to calculate ef from measured values of ef. However, for cylindrical tensile specimens the reduction of area q is related to the true fracture strain by the relationship

(3)


True Uniform Strain


The true uniform strain eu is the true strain based only on the strain up to maximum load. It may be calculated from either the specimen cross-sectional area Au or the gage length Lu at maximum load.

Equation (3) may be used to convert conventional uniform strain to true uniform strain. The uniform strain is often useful in estimating the formability of metals from the results of a tension test.

(4)


True Local Necking Strain


The local necking strain en is the strain required to deform the specimen from maximum load to fracture.

(5)

Procurar conhecimento básico

Colocar uma frase para procurar por:

Procurar por

Texto completo
Palavras chaves

Títulos
Resumo

Este artigo pertence a uma série de artigos. Você pode clicar nos links abaixo para ler mais sobre este tema.

A Total Materia Extended Range inclui uma coleção única de curvas tensão-deformação e diagramas para os cálculos na faixa de plástico para milhares de ligas de metal, tratamentos térmicos e temperaturas de trabalho. Curvas tensão verdadeira e engenharia são dadas para várias taxas de deformação quando aplicável.

Encontrar um gráfico de tensão-deformação no banco de dados é simples e leva apenas alguns segundos.

Digite o material de interesse no campo de pesquisa rápida. Você pode, opcionalmente, limitar a sua pesquisa, especificando o país / padrão de escolha no campo designado e então, clique em Pesquisar.


Depois de selecionar o material de seu interesse, clique no link diagramas de tensão-deformação para visualizar os dados para o material selecionado. O número de disponíveis diagramas de tensão-deformação é exibido entre parênteses ao lado do link.


Porque as curvas tensão-deformação da Total Materia são neutras em especificações padrão, pode rever tensão-diagramas, clicando no link apropriado para qualquer um dos subgrupos.

Além das curvas de tensão-deformação a diferentes temperaturas, o stress e os dados de deformação são dadas em um formato tabular que é conveniente para a cópia para, por exemplo, um software CAE.


É também possível ver curvas tensão-deformação e dados para outras temperaturas de trabalho.

Para isso, basta inserir uma nova temperatura no 'Enter temperatura' campo dentro do intervalo definido.

Após clicar no botão Calcular, uma nova curva é plotada e valores na tabela agora correspondem com a temperatura que você definiu. Veja o exemplo abaixo de 250°C.


Para você é uma oportunidade de fazer um test drive na Total Materia, nós convidamos você a participar de uma comunidade de mais de 150.000 usuários registrados através da Total Materia Free Trial.