LD-ORP Optimizing Refining Process: Part Two

Abstract:

The LD-ORP significantly shortens the tap to tap time and allows for increased heat size meaning and overall positive gain in converter productivity.
Another significant gain through implementation of LD-ORP in specific cases has been the reduction in the process consumption of CaO.

The developed method, named the LD-Optimized Refining Process (LD-ORP), comprises charging hot metal into the converter assigned for de-Si and de-P, and then, after these processes, desulfurizing it in the same vessel by blowing CaO and other desulfurizing agents from the bottom, discharging the slag, and transferring the hot metal to another converter assigned for de-C.

Through the development, introduction, and modification of the LD-ORP process, it has become possible to shorten the tap-to-tap time and increase the heat size and thereby enhance the converter productivity as shown in Figures 1 and 2. In addition, the unit consumption of CaO has been reduced as shown in Figure 3. Furthermore, because the introduction of ORP II and the installation of a furnace exclusive for desulfurization made it possible to completely omit the desulfurization treatment using torpedo cars, the turnover rate of torpedo cars has improved as shown in Figure 4.



Figure 1: Changes of tap-to-tap time at the converter by introduction of LD-ORP



Figure 2: Increase in heat size of the converter by introduction of LD-ORP



Figure 3: Reduction of lime consumption by introduction of LD-ORP



Figure 4: Changes of turnovertimes of torpedo-car

Doorzoek Kennisbank

Geef een zoekterm in:

Zoeken op

Volledige tekst
Kernwoorden

Titels
Abstract:

Heat treatment diagrams are available for a huge number of materials in the Total Materia database.

Heat treatment diagrams covering hardenability, hardness tempering, TTT and CCT can all be found in the standard dataset.

To select materials by special properties, you can use the special search check boxes in the Advanced Search module.

To define the search criteria, all you have to do is select the country/standard of interest to you from the ‘Country/Standard’ pop-up list and to check ‘Heat Treatment Diagram’ box, situated in the Special Search area of the form in the lower part of the Advanced Search page.

Click Submit.

solution img

After selecting the material of interest to you, click on the Heat Treatment link to view data for the selected material. The number of heat treatment records is displayed in brackets next to the link.

solution img

All available heat treatment information will then be displayed for the chosen material.

solution img

solution img

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.