JIS Standard List: Castings, Forgings, Welding and Filler Materials and Powder Metallurgy/Sintered M

요약:

The specifications begin with the prefix JIS, followed by a letter, where the letter denotes the area of division, followed by four digits. Japanese JIS standards are widely used in Asia and the Pacific areas. JIS steel specifications have also often been used as a base for other national systems, such as Korean, Chinese, and Taiwanese.

JIS standards are developed by the Japanese Industrial Standards Committee (JISC) in Tokyo with an aim to promote the industrial standards of Japan. The below list contains standards for the following material categories:

  • Castings
  • Forgings
  • Welding and Filler Materials
  • Powder Metallurgy/Sintered Materials

For more information on the JIS designation system see Introduction to the JIS Standard Designation System.

The list of standards below covers a wide range of materials and applications a few of which are:

  • Quenched and tempered alloy steel forgings for pressure vessels
  • Corrosion-resisting and heat-resisting superalloy plates, sheets and bars
  • High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service

Castings

Standard
Number
Last
version
Description Status
B 0403 1995 Castings - System of dimensional tolerances and machining allowances  
B 0407 1978 Permissible deviations in dimensions without tolerance indication for iron castings Replaced by JIS B 0403:1995
B 0412 1978 Permissible deviations in dimensions without tolerance indication for steel castings Replaced by JIS B 0403:1995
B 0703 1987 Roundness of castings  
B 2031 1994 Gray cast iron valves  
F 2002 1976 Cast iron dog type chain cable compressors Withdrawn 1999
F 2003 1995 Cast iron deck end rollers Withdrawn 1999
F 2015 1987 Cast steel bar type chain cable stoppers Replaced by JIS F 2031:1998
F 2019 1979 Cast iron deck end rollers (small size) Withdrawn 1999
F 3058 1996 Cast steel vertical storm valves  
F 3060 1996 Cast steel screwdown vertical storm valves  
G 0307 1998 Steel castings - General technical delivery requirements  
G 0585 2002 Radiographic inspection for steel castings  
G 5101 1991 Carbon steel castings  
G 5102 1991 Steel castings for welded structure  
G 5111 1991 High tensile strength carbon steel castings and low alloy steel castings for structural purposes  
G 5121 2003 Corrosion-resistant cast steels for general applications  
G 5122 2003 Heat-resistant cast steels and alloys for general applications  
G 5131 2008 High manganese steel castings  
G 5151 1991 Steel castings for high temperature and high pressure service  
G 5152 1991 Steel castings for low temperature and high pressure service  
G 5201 1991 Centrifugally cast steel pipes for welded structure  
G 5202 1991 Centrifugally cast steel pipes for high temperature and high pressure service  
G 5501 1995 Grey iron castings  
G 5502 2001 Spheroidal graphite iron castings  
G 5503 1995 Austempered spheroidal graphite iron castings  
G 5504 2005 Heavy-walled ferritic spheroidal graphite iron castings for low temperature service  
G 5510 1999 Austenitic iron castings  
G 5511 1991 Low thermal expansive Fe-alloy castings  
G 5525 2000 Cast-iron drainage pipes and fittings  
G 5703 1988 Whiteheart malleable iron castings Replaced by JIS G 5705:2000
G 5704 1988 Pearlitic malleable iron castings  
G 5705 2000 Malleable iron castings  
G 5903 1975 Cast shot and grit  


Forgings

Standard
Number
Last
version
Description Status
B 0415 1975 Dimensional tolerance for steel die forgings (hammer and press forging)  
B 0416 1975 Dimensional tolerance for steel die forgings (upsetting)  
B 0418 1999 Machining allowance for open die forgings  
B 0706 1987 Corner and fillet radii of forged parts (hot and warm forgings)  
B 5013 1994 Die sets for press dies Withdrawn 2001
G 0306 1988 Steel forgings - General technical requirements  
G 3201 1988 Carbon steel forgings for general use  
G 3202 1988 Carbon steel forgings for pressure vessels  
G 3203 1988 Alloy steel forgings for pressure vessels for high-temperature service  
G 3204 1988 Quenched and tempered alloy steel forgings for pressure vessels  
G 3205 1988 Carbon and alloy steel forgings for pressure vessels for low-temperature service  
G 3206 1993 High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service  
G 3214 1991 Stainless steel forgings for pressure vessels  
G 3221 1988 Chromium molybdenum steel forgings for general use  
G 3222 1988 Nickel chromium molybdenum steel forgings for general use  
G 3223 1988 High tensile strength steel forgings for tower flanges  
G 3251 1988 Carbon steel blooms and billets for forgings  
G 3545 1991 Boron steel wires for cold heading and cold forging Replaced by JIS G 3508-2:2005
G 4315 2000 Stainless steel wires for cold heading and cold forging  
G 4319 1991 Stainless steel blooms and billets for forgings  
G 4320 2003 Cold-formed stainless steel sections  
G 4321 2000 Stainless steel for building structure  
G 4322 2008 Stainless steel bars for concrete reinforcement  
G 4901 1999 Corrosion-resisting and heat-resisting superalloy bars  
G 4902 1991 Corrosion-resisting and heat-resisting superalloy plates and sheets  
G 4903 2008 Seamless nickel-chromium-iron alloy pipes  
G 4904 2008 Seamless nickel-chromium-iron alloy heat exchanger tubes  


Welding and Filler materials

Standard
Number
Last
version
Description Status
G 4316 1991 Stainless steel wire rods for welding  
Z 3252 2001 Covered electrodes for cast iron  
Z 3322 2002 Materials for stainless steel overlay welding with strip electrode  
Z 3422-1 2003 Specification and approval of welding procedures for metallic materials - Welding procedure tests - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys  


Powder metallurgy/Sintered materials

Standard
Number
Last
version
Description Status
H 2601 1983 Iron powder Withdrawn 2000
Z 2500 2000 Powder metallurgy - Vocabulary  
Z 2501 2000 Sintered metal materials - Determination of density, oil content, and open porosity  
Z 2502 2000 Metallic powders - Determination of flowability by means of a calibrated funnel (Hall flowmeter)  
Z 2503 2000 Powders for powder metallurgical purposes - Sampling  
Z 2550 2000 Sintered metal materials - Specification  

기술 자료 검색

검색할 어구를 입력하십시오:

검색 범위

본문
키워드

머릿글
요약

Total Materia로, 금속 표준 규격 사양, 그것의 현 상태와 정의하는 자료에 대한 정보를 검색하는 것은 매우 간단합니다.

몇 초 이내에 Total Materia 규격 리스트에서 관련 세부 소재 특성 데이터 또는 등가 재질을 검색하는 것이 가능합니다.

시작하시려면, 메뉴 표시줄의 규격 리스트 버튼을 클릭합니다.


단순히 표준 개발 기구(SDO)를 선택하거나 표준 번호 또는 키워드를 입력하시기만 하면, 30,000 이상의 규격과 다국어 데이터베이스에서 즉각적으로 결과를 받을 수 있습니다.

예를 들어, 팝업에서 이 SDO를 선택하여 JIS에 있는 모든 금속 규격을 검토할 수 있습니다.


결과 목록은 1000개의 재질, JIS개의 금속 규격으로 구성되어 있습니다. 포함 정보: 규격 설명, 마지막 발행 해, 현재의 상태 (유효, 교체 등), 및 규격에 의해 정의된 재질들의 핫 링크로 구성되어 있습니다.


단순히 재질의 링크를 클릭하시면, 선택한 규격에 의해 정의된 금속 재질의 목록을 볼 수 있습니다.


재질의 목록에서, 각 재질의 자세한 특성과 등가물을 검토하실 수 있습니다.


Total Materia 데이터베이스를 사용해 보실 수 있는 기회가 있습니다. 저희는 Total Materia 무료 체험을 통해 150,000명 이상의 사용자가 이용하고 있는 커뮤니티로 귀하를 초대합니다.