The Steel Carburizing Process: Part Two

概要:

Steel carburizing is a process whereby carbon is diffused into the surface of steel (usually low-carbon steel) at high temperatures where austenite is present and the diffusion rate of carbon in steel is reasonably high.
The depth and level of hardening achieved depends on a number of factors, including carburizing time at a given temperature and consideration that an increase in time decreases the activation energy for diffusion to occur exponentially.

Case carburizing steels (alternatively known as case hardening steels) are widely used in applications where high surface-near hardness is required in combination with good core toughness as well as high strength and fatigue resistance. These steels have been the material of choice for several decades to manufacture components like gears, shafts or bearings. Depending on the application and the component size the following alloy systems have been established:
i) Chromium steels for smaller components when only low hardenability is required.
ii) Manganese-chromium steels with medium hardenability for passenger vehicle components.
iii) Chromium-molybdenum steels with medium/high hardenability for passenger and commercial vehicle components.
iv) Chromium-nickel-molybdenum steels with high hardenability for severely loaded machinery and commercial vehicle components.
v) Nickel-chromium steels with high hardenability for components with extraordinary toughness requirements.

In the work of P.O.Atanda et al., the effect of carburizing variables on C2R steel used in machine tool operation for the manufacture of different machine tool components has been studied with the aim of improving both the production processes and the manufactured components used in machine tools operation. The components studied include gears of different shapes and contours, like the spiral, bevel, worm, taper, helical, etc.

This study reports an investigation of the effect of carburizing variables – temperature, time and percentage of energizer –on the case properties of C2R steel obtained from HMT Ltd. India. A carburizer consisting of hardwood charcoal and coke respectively in the ratio of 2:1 was used for the research with sodium carbonate as the energizer. The carburizing box was filled with 20 mm thick carburizer compound prior to fixing the steel samples in place. The specimens were carburized using different percentages of energizers (10, 20 and 30%) at different temperatures (820, 860, 900 and 940°C) for different times (from one to five hours). All the specimens were quenched from carburizing temperature, ground to polished surfaces and then etched for ten minutes in 25% Nital. The case depth was measured using the calibrated ocular of an inverted metallurgical microscope fixed at 100 x magnification. The hardness values of the C2R steel cases were measured with a micro hardness tester that uses diamond pyramid indenter. The results of the study showed that the average hardness of the C2R steel cases increased with temperature for any given carburizing time and temperature. For a given percentage energizer and temperature, the case depths and hardness increased with time. Increase in the percentage energizer however decreased the activation energy required for diffusion to occur exponentially.

The effect of energizers proportion on case depth is showed in Figures 7 and 8. It can be seen that for any given carburizing time and temperature case depth increases as the percentage energizer increases. This is probably so because increase in energizer composition increases the nascent carbon on the surface of the steel. In other words, there would have been an increase in the carbon potential of the carburizer and consequently a higher diffusion rate of carbon into steel leading to an increased case depth as the percentage of the energizer (Na2CO3) increases.



Figure 7: The relationship between case depth and proportion of energizer (Na2CO3) at carburizing temperature of 900°C.



Figure 8: The relationship between case depth and proportion of energizer (Na2CO3) at carburizing temperature of 940°C.

The effects of carburizing temperature and time on hardness of case are shown in Figures 9, 10 and 11. The average hardness of the case increases with temperature for any given carburizing time and percentage energizer. The explanation for this is that temperature increase diffusion rate, leading to a case of higher carbon content than a case developed at lower temperature. This leads to the formation of more martensite on quenching and hence increased hardness. The increase of solubility of carbon in austenite with temperature is another factor.



Figure 9: The relationship between average case hardness and temperature for various carburizing time using 10% Na2CO3 (as quenched)



Figure 10: The relationship between average case hardness and temperature for various carburizing time using 20% Na2CO3 (as quenched)



Figure 11: The relationship between average case hardness and temperature for various carburizing time using 30% Na2CO3 (as quenched)

The depth of resulting case and the hardness obtained depends on the factors summarized below:
a) The case depth obtained increase with temperature, time and percentage energizer.
b) The case hardness increases with the percentage energizer and carburizing time for a given temperature.
c) For a given temperature and percentage energizer, case depth and hardness increases with time.
d) For a given percentage energizer and time increase, in temperature increase the case depth and hardness.
e) For a given time and temperature, increase in percentage energizer increases the case depth and its hardness.
f) Increase in the percentage of energizer decreases the activation energy for diffusion to occur exponentially.
g) Increase in time decreases the activation energy for diffusion to occur exponentially.


References

1. Hardy Mohrbacher: Metallurgical concepts for optimized processing and properties of carburizing steel, Adv. Manuf. (2016) 4:105–114, DOI 10.1007/s40436-016-0142-9;

2. P.O. Atanda, O.E. Olorunniwo, L.E. Umoru, A.D. Adeyeye: A Study of Processing Parameters on the Carburization of C2R Steels, Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No.2, 2009, p. 79-92.

ナレッジベース検索

検索したい語句を入力:

検索方法

全文一致
キーワード

前方一致
要約

Total Materiaデータベースでは膨大な数の材料熱処理状態図を見る事ができます。

熱処理状態図には焼入硬化性、焼き戻し硬化性、TTT, CCTが含まれ標準のデータベースベーシックに含まれております。

特殊な特性で材料を選ぶには高度な検索モジュールのチェックボックスを利用すると検索することができます。

まず検索条件を決めます。対象材料の国/規格を選び、高度な検索のページの下の特殊な検索のところにある ’熱処理状態図’ のチェックボックスにチェックを入れます。

確定をクリックします。


対象材料を選んでから熱処理のリンクをクリックするとその材料のデータを見る事ができます。熱処理データ記録の数はリンクの隣のカッコ内に表示されております。


選んだ材料の熱処理情報はすべて表示されます。






Total Materiaデータベースをあなたにテスト評価を頂くために15万人以上の方が登録されている無料お試しコミュニティ-へ御招待致します。