Shape Rolling

Abstrakti:

Shape rolling of steels is a process which requires a lot of heat and a lot of force. Reheating is carried out to around 1200°C and then the metal is continuously fed through rollers to draw the desired dimensions.
Popular shapes have good application in the construction business as I, H, and U shaped beams or girders can be produced for structural integrity.

Steel is a strong material that is highly resistant to shaping at normal temperatures but this resistance lessens considerably at higher temperatures. For that reason the billets, blooms and slabs from the steelmaking process are shaped into basic products at carefully controlled elevated temperatures.

The method that is most commonly used for shaping is to heat the steel to around 1,200°C in a reheat furnace and roll the steel, squeezing it between sets of cylinders or rolls. Rolls are arranged in pairs and housed in a 'stand'.

To change the shape of a material as strong as steel the rolls must exert forces measured in thousands of tones, and must also draw the steel continuously through the rolls while reducing the thickness. Two main classes of product are produced – flat products, sheets or strips of uniform thickness, and long products - lengths of a particular cross section, ranging from rectangular bars to double flange H sections. For flat products, two horizontal rolls are set one above the other in an open housing.

For long products, a series of specially shaped and angled rolls (referred to as stands) are used to transform the section to the required shape. The figure shows the stand used to create open sections.

British, European and International standards define dimensions for a wide variety of open section shapes, notably I and H shaped sections, angle sections and channels.



Figure 1: Standard open sections

In shape rolling, the work is deformed into a contoured cross section. Products made by shape rolling include construction shapes such as I-beam, L-beam, and U-channels; rail for railroad tracks; and round and square bars and rods. The process is accomplished by passing the work through rolls that have the reverse of the desired shape.

In the form of illustration, the stages in shape rolling of an H-section part can be seen in Figure 2.



Figure 2: Stages in the H-section shape rolling

Etsi tietämyskannasta

Kirjoita etsittävä lauseke:

Etsi

Koko teksti
Avainsanat

Otsikot
Abstraktit

Heat treatment diagrams are available for a huge number of materials in the Total Materia database.

Heat treatment diagrams covering hardenability, hardness tempering, TTT and CCT can all be found in the standard dataset.

To select materials by special properties, you can use the special search check boxes in the Advanced Search module.

To define the search criteria, all you have to do is select the country/standard of interest to you from the ‘Country/Standard’ pop-up list and to check ‘Heat Treatment Diagram’ box, situated in the Special Search area of the form in the lower part of the Advanced Search page.

Click Submit.

solution img

After selecting the material of interest to you, click on the Heat Treatment link to view data for the selected material. The number of heat treatment records is displayed in brackets next to the link.

solution img

All available heat treatment information will then be displayed for the chosen material.

solution img

solution img

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.