Plasma Transferred Arc Welding


The Plasma Transferred Arc welding technique is an evolutionary development of the more widely used Gas Tungsten Arc Welding process.
Using a constrictor nose to harness and concentrate very high energy and restricting the electric arc using various gas control methods, PTAW is highly effective for specific welding cases.

The Plasma Transferred Arc (PTA) process employs the plasma principle hence it may be considered an evolution of the Gas Tungsten Arc Welding (GTAW) process, where the high-energy concentration is due to the use of a constrictor nose, which restrains the column diameter of an electric arc established between a tungsten electrode and the workpiece in an inert gas atmosphere, usually argon.

The feeding material is carried to the plasma jet by a gas stream, which might be inert, active or a mixture of active and inert gases. A third gas flow is employed to protect the metal pool from atmospheric contamination. Even though there is the possibility of using mixtures of active and inert gases, argon is typically employed for all three-gas systems.

The PTA process can be considered a derivation of the PAW process. The similarities between the two processes can be observed in Figure 1. Both welding processes employ a non-consumable tungsten electrode located inside the torch, a water-cooled constrictor nozzle, shield gas for the protection of the molten pool, and the plasma gas. The difference between the two welding processes lies in the nature of the filler material, powder instead of wire, which requires a gas for its transport to the arc region. The diagram in Figure 1 shows the two processes with their differences and similarities.

Figure 1: Comparison of Plasma Transferred Arc processes and PAW

As mentioned above, the PTAW welding process and equipment are a modification of Gas Tungsten Arc Welding (GTAW). The significant difference involves a redesign of the GTAW torch to provide a concentration and collimation of the arc plasma. This is achieved by generating the arc and its plasma within the confines of the torch followed by discharging the high temperature ionized plasma through an orifice.

The diameter, configuration and throat length of the orifice are carefully designed to maximize the desirable properties of the arc, i.e. culmination, high temperature and stability. Orifice details are interchangeable so that variations in these dimensions are available to satisfy a variety of weld requirements. The orifice concentrates the plasma arc and collimates the flow so that it assumes a beam configuration as opposed to the "umbrella" shaped arc of the GTAW process.

Figure 2: Schematic view of Plasma Transferred Arc (PTA) Welding


  • Hard Surfacing: PTAW is well suited to apply hard alloys for wear resistance. Stellite, Colmonoy, Hastelloy, and Tungsten Carbide can all be successfully applied with PTAW.
  • Corrosion Resistant Overlays: The localize heat input characteristics of PTAW allow corrosion resistant alloys to be applied with very little dilution into the base material. PTAW can achieve subsea chemistry requirements of <5% Fe in as little as 0.040” of overlay thickness.
  • Industries / Components:
    - Non-Mag Down Hole Tools: Drill Collars, Wear Bands for MWDs, Flex Ponies etc.
    - Down Hole Components: Mud Motor Bearings, Stabilizers, Topsubs, Piston SubsFlow Restrictors, Drill Bits etc.
    - Flow Control: Valve Bores, Gates, Seats, Seat Pockets, Ring Grooves, Valve Stems etc...
    - Power Generation: Turbine Blades, Shafts, Bearing Surfaces, etc.
    - Riser Equipment o Pins, Boxes, etc.


1. A.S.C.M.D’Oliviera, R.S.C.Paredes, R.L.C. Santos: Pulsed current plasma transferres arc hardfaccing, Journal of Materials Processing Technology 171, 2006, p.167–174;

2. V.V.Diaz, J.C.Dutra, A.S.C.D’Oliveira: Hardfacing by Plasma Transferred Arc Process, INTECH, Ed.W.Sudnik, 2011, ISBN 978-953-307-642-3;

3. P.V. Senthill, A.Shirrushti: Finite Element Simulation of Plasma Transferred Arc Welding [PTAW} of structural steel, PV Senthiil Int. Journal of Engineering Research and Applications ISSN : 2248-9622, Vol. 4, Issue 10(Part - 4), October 2014, p.06-11;

4. What is Plasma Transferred Arc Welding [PTAW], 1/12/15, js, Accessed Oct 2015;

Durchforschen Sie bitte den Informationsteil der Datenbank

Geben Sie bitte eine Anfrage, um Suche einzuleiten:

Suche nach

Vollständiger Text


Die Total Materia Datenbank enthält mehrere tausende von Schweisszusatzwerkstoffe aus vielen Ländern und Normen.

Wenn zur Verfügung stehend, können alle Informationen über die Werkstoffeigenschaften angezeigt werden, einschliesslich chemische Zusammensetzung, mechanische und physikalische Eigenschaften, Kohlenstoffäquivalent und Schweissratschläge.

Auf der Seite der erweiterten Suche, definieren Sie Ihre Kriterien indem Sie Schweisszusatzwerkstoffe aus der Liste der Werkstoffgruppen auswählen. Es kann auch notwendig sein daß Sie Ihre Suche weiter einschränken indem Sie die anderen Felder der erweiterten Suche, wie z.B. Land/Norm benutzen.

Klicken Sie auf "Absenden".

Es wird danach eine Liste von Werkstoffen angezeigt von welcher Sie auswählen können.

Nachdem Sie auf der Ergebnisliste auf den entsprechenden Werkstoff geklickt haben, wird eine Liste der Untergruppen, welche Normspezifikationen sind, angezeigt.

Von hieraus ist es möglich, spezifische Eigenschaften für den ausgewählten Werkstoff anzuzeigen und äquivalente Werkstoffe mit unseren leistungsstarken Cross-Reference Tabellen zu finden.

Klicken Sie auf den Link der Werkstoffdaten die Sie interessieren um diese anzuzeigen.

Um unsere Datenbank auszuprobieren, laden wir Sie ein sich unserer Nutzergemeinschaft von über 150 000 angemeldeten Benutzern, mit einem kostenlosen Probeaboanzuschliessen.