ASTM Standard List - Structural and Constructional Steels Standards: Part Five
Abstrakt:
ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.
This article contains a list of standards that covers among other things:
- Bolts, bars and piping used specifically in the construction industry
- Steel wires for masonry joining applications
- Carbon steel sheets with ultra-high strengths
For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.
Structural and Constructional Steels: Part Five
Standard Number |
Last version |
Description |
Status |
A 896 |
2009 |
Standard Practice for Conducting Case Studies on Galvanized Structures |
/no materials/ |
A 905 |
2004 |
Steel Wire, Pressure Vessel Winding |
/2/ |
A 906/A 906M |
2002 |
Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting |
/no materials/ |
A 907/A 907M |
1996 |
Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality |
Replaced by A1018/A1018M /4/ |
A 910/A 910M |
2005 |
Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete |
/2/ |
A 911/A 911M |
2005 |
Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties |
/1/ |
A 913/A 913M |
2007 |
High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) |
/4/ |
A 914/A 914M |
2005 |
Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
/23/ |
A 920/A 920M |
2007 |
Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
/36/ |
A 921/A 921M |
2005 |
Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
/6/ |
A 936/A 936M |
1997 |
Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability |
Replaced by A1018/A1018M /4/ |
A 945/A 945M |
2006 |
High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness |
/2/ |
A 951/A 951M |
2006 |
Steel Wire for Masonry Joint Reinforcement |
/1/ |
A 960/A 960M |
2008 |
Common Requirements for Wrought Steel Piping Fittings |
/no materials/ |
A 961/A 961M |
2008 |
Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications |
/no materials/ |
A 962/A 962M |
2009 |
Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range |
/no materials/ |
A 963/A 963M |
1997 |
Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled |
Replaced by A1008/A 1008M /no materials/ |
A 964/A 964M |
2003 |
Corrugated Steel Box Culverts |
/no materials/ |
A 969/A 969M |
1997 |
Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled |
Replaced by A1008/A 1008M /no materials/ |
A 970/A 970M |
2009 |
Headed Steel Bars for Concrete Reinforcement |
/no materials/ |
A 973/A 973M |
2007 |
Grade 100 Alloy Steel Chain |
/no materials/ |
A 979/A 979M |
2009 |
Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field |
/no materials/ |
A 980 |
2003 |
Steel, Sheet, Carbon, Ultra High Strength Cold Rolled |
/4/ |
A 984/A 984M |
2009 |
Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded |
/8/ |
A 992/A 992M |
2006 |
Structural Steel Shapes |
/1/ |
A 994 |
2009 |
Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys |
/no materials/ |
A 996/A 996M |
2009 |
Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
/6/ |
A 1005/A 1005M |
2004 |
Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
/5/ |
A 1006/A 1006M |
2004 |
Steel Line Pipe, Black, Plain End, Laser Beam Welded |
/5/ |
A 1007 |
2007 |
Carbon Steel Wire for Wire Rope |
/no materials/ |
A 1008/A 1008M |
2009 |
Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable |
/43/ |
A 1014/A 1014M |
2009 |
Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service |
/1/ |
A 1017/A 1017M |
2007 |
Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
/3/ |
A 1018/A 1018M |
2009 |
Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength Steel |
/55/ |
A 1020/A 1020M |
2007 |
Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
/3/ |
A 1030/A 1030M |
2005 |
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products |
/no materials/ |
A 1031 |
2009 |
Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled |
/49/ |
A 1035/A 1035M |
2009 |
Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement |
/2/ |
A 1040 |
2009 |
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels |
/341/ |
A 1041/A 1041M |
2009 |
Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
/2/ |
A 1042/A 1042M |
2009 |
Composite Corrugated Steel Pipe for Sewers and Drains |
/no materials/ |
A 1043/A 1043M |
2009 |
Structural Steel with Low Yield to Tensile Ratio for Use in Buildings |
/4/ |
A 1044/A 1044M |
2005 |
Steel Stud Assemblies for Shear Reinforcement of Concrete |
/2/ |
F 432 |
2008 |
Roof and rock bolts and accessories |
/5/ |
F 436 |
2009 |
Hardened steel washers |
/2/ |
F 541 |
2004 |
Alloy steel eyebolts |
/2/ |
F 568M |
2007 |
Carbon and alloy steel externally threaded metric fasteners |
/19/ |
Durchforschen Sie bitte den Informationsteil der Datenbank
|
|
Dieser Artikel ist Teil einer Artikelserie. Klicken Sie die Links um mehr über dieses Thema zu lesen.
|
Mit der Total Materia Datenbank, können Sie durch nur einen Klick Informationen zu Metallnormen, deren aktuellen Status sowie den beschriebenen Werkstoffen finden. In Sekundenschnelle, ist es auch möglich, betreffende Werkstoffeigenschaften zu sehen oder, über die Liste der Normen, ähnliche Werkstoffe zu finden. Zu Anfang, klicken Sie auf den "Norm" Button in der Menüleiste. Geben Sie dann einfach den Namen einer Normentwicklungsgesellschaft (SDO) oder eine Normnummer ein, und Sie erhalten sofort Ergebnisse unserer mehrsprachigen Datenbank, welche über 30 000 Normen enthält. So können Sie zum Beispiel alle Metallnormen von ASTM sehen, indem Sie diese SDO aus der Liste auswählen. Die Ergebnisliste enthält über 3000 Werkstoffe ASTM Metallnormen. Die Informationen beinhalten: Normbeschreibung, letztes Jahr der Ausgabe, gegenwärtigen Status (gültig, ersetzt, etc.) und einen Link zu den Werkstoffen welche von dieser Norm beschrieben werden. Wenn Sie auf diesen Link klicken, können Sie eine Liste mit den Werkstoffen sehen, welche durch diese Norm beschrieben werden. Über diese Werkstoffliste, können Sie dann die Detaillierten Eigenschaften sehen und für jeden Wekstoff Äquivalenzen finden. Um unsere Datenbank auszuprobieren, laden wir Sie ein sich unserer Nutzergemeinschaft von über 150 000 angemeldeten Benutzern, mit einem kostenlosen Probeaboanzuschliessen.
|