Molten Light Metal Processing: Part One

Выдержки:

In the melting of commercial non-ferrous metals and alloys (aluminum, magnesium, copper, zinc, and lead), various auxiliary molten metal processing steps are necessary other than melting and alloying.
Generally, the historic practices of fluxing, metal refining, deoxidation, degassing, and grain refining have been used, and they apply to virtually all nonferrous metal systems. In addition, molten metal pumping and filtration are two somewhat newer but now commonly practiced technologies in nonferrous molten metal processing. This article will describe the molten metal processing methodologies currently used in conventional nonferrous molten metal operations. These process methodologies pertain not only to foundry melting and casting but also to smelting, refining, and in certain cases mill product operations.

In the melting of commercial non-ferrous metals and alloys (aluminum, magnesium, copper, zinc, and lead), various auxiliary molten metal processing steps are necessary other than melting and alloying.

Generally, the historic practices of fluxing, metal refining, deoxidation, degassing, and grain refining have been used, and they apply to virtually all nonferrous metal systems. In addition, molten metal pumping and filtration are two somewhat newer but now commonly practiced technologies in nonferrous molten metal processing. This article will describe the molten metal processing methodologies currently used in conventional nonferrous molten metal operations. These process methodologies pertain not only to foundry melting and casting but also to smelting, refining, and in certain cases mill product operations.

Fluxing

The term fluxing is used in this article to represent all additives to, and treatments of, molten metal in which chemical compounds or mixtures of such compounds are employed. These compounds are usually inorganic. In some cases, metallic salts are used in powder, granulated, or solid tablet form and may often melt to form a liquid when used. They can be added manually or can be automatically injected, and they can perform single or, in combination, various functions, including degassing, cleaning, alloying, oxidation, deoxidation, or refining.

The term fluxing also includes the treatment of nonferrous melts by inert or reactive gases to remove solid or gaseous impurities. Fluxes are commonly used to some extent with virtually all nonferrous molten metal operations in both the foundry and in the production of mill products.

Fluxing of Aluminum Alloys

In aluminum melting, and especially in the remelting of foundry returns or other scrap, oxide formation and nonmetallic impurities are common. Impurities appear in the form of liquid and solid inclusions that persist through melt solidification into the casting. Inclusions can originate from dirty tools, sand and other molding debris, sludge, metalworking lubricant residues, and the oxidation of alloying elements and/or the base metal.

The term fluxing, in the broadest sense, applies to a treatment technique to the melt containing such impurities and inclusions as those mentioned above. Fluxing of the melt facilitates the agglomeration and separation of such undesirable constituents from the melt.

Some materials that are being used as fluxes for aluminum are listed below:

  • Aluminum chloride, AlCl3
  • Aluminum fluoride, AlF3
  • Borax, Na2B4O7
  • Calcium chloride, CaCl2
  • Calcium fluoride, CaF2
  • Carnalite, MgCl2KCl
  • Zinc chloride, ZnCl2
  • Cryolite, 3NaFAlF3
  • Lithium chloride, LiCl
  • Magnesium chloride, MgCl2
  • Potassium chloride, KCl
Four principal types of fluxes are used for aluminum alloys. They are: cover fluxes, cleaning fluxes, drossing fluxes, and refining fluxes. Wall-cleaning fluxes are also employed, but these are usually sprayed onto furnace walls rather than added to the melt.

Cover fluxes are designed to be used primarily with smaller (pot, crucible) furnaces to provide a physical barrier to oxidation of the melt or to serve as a cleanser for alloys, scrap foundry returns, or fresh ingot being charged.

Cleaning fluxes are usually higher in chloride salt compound content and usually contain fluorides to facilitate wetting of the oxide inclusions for easier separation from the melt.

Drossing fluxes are designed to promote separation of the aluminum oxide (Al2O3) dross layer that forms on the surface of the melt from the molten metal. Drosses and liquid or solid metal are usually intermingled in the dross layer. The drossing fluxes are designed to react with Al2O3 in the slag or dross layer and to recover metal. The fluorides wet and dissolve thin oxide films according to the general reaction.

6Na2SiF6 + 2Al2O3 → 4Na3AlF6 + 3SiO2 + 3SiF4

With sufficient mechanical agitation through rabbling with a rake, these films will be broken long enough to release entrapped metal. Drossing fluxes are used to great advantage in the aluminum industry to reduce the rich metallic content of the dross. Untreated dross may contain 60 to 85% free metal, which, if allowed to burn or thermite, will convert to unrecoverable Al2O3.

Wall-cleaning fluxes contain compounds that help soften the oxide buildup that occurs on furnace walls. These fluxes can often be applied with a typical refractory gunning device.

Fluxing of Magnesium Alloys

Magnesium and its alloys are exceptionally susceptible to oxidation, melt loss, and fires because of the extreme reactivity between magnesium and oxygen. Protection is therefore always required when melting this alloy family. Historically, this has involved the so-called flux process, which uses salt fluxes as a cover, or more recently the fluxless process, which uses inert gas.

Molten magnesium oxidizes readily to form a magnesium oxide (MgO) film. This film is easily disturbed, and discontinuous MgO liquid film inclusions readily wet and coat solid charge materials and can also entrain liquid metal. Fluxes are therefore used to protect the melt from oxidation, to agglomerate nonmetallic inclusions originating with the charge, and to break up and collect the oxide inclusions and skins that may form during melting. These fluxes are usually low-melting mixtures of halide salts capable of wetting both solid and liquid metal surfaces.

A typical flux composition includes approximately 49% MgCl2, 27% KCl, 20% BaCl2, and 4% CaF2. The magnesium and potassium chloride salts provide the low-melting eutectic; the fluoride, the surface wettability and chemical reactivity with magnesium oxide; and the heavy barium chloride salt constituent, the density component to effect mixing and sludging capability for separation. Other useful cover fluxes include a simple mixture of sulfurous compounds with fluoborate salts or boric acid.

All flux materials should be kept clean and dry and should be stored in their original containers. All tools used with fluxes should be clean, dry, and preheated to drive off any surface moisture and to minimize thermal shock when placed into the melt.

Поиск в Банке Знаний

Введите фразу для поиска:

Поиск по

Всему тексту
Ключевым словам

Заголовкам
Выдержкам

Данная статья относится к серии статей. Нажмите на ссылку ниже, чтобы узнать больше по этой теме.

The Total Materia database contains many thousands of casting materials across a large range of countries and standards.

Where available, full property information can be viewed for materials including chemical composition, mechanical properties, physical properties, advanced property data and much more.

Using the Advanced Search page, it is possible to search for materials by their key descriptive words detailed in the standard title by using the Standard Description function of Advanced Search.

It maybe that you need to further narrow the search criteria by using the other fields in the Advanced Search page e.g. Country/Standard.

Then click Submit.

solution img

A list of materials will then be generated for you to choose from.

solution img

After clicking a material from the resulting list, a list of subgroups derived from standard specifications appears.

From here it is possible to view specific property data for the selected material and also to view similar and equivalent materials in our powerful cross reference tables.

solution img

For example, by clicking on the chemical composition link on the subgroup page it is possible to view chemical composition data for the material.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.