Die Casting of Aluminum Alloys: Part One

Sumário:

Aluminum castings are used for many industrial applications, for example in the automotive industry, applications includes wheels, cylinder blocks and heads, pistons, brake cylinders, and suspension arms. The substitution of aluminum cast components for ferrous castings in the automotive sector is predicted to continue to grow as automakers continue to seek opportunities to reduce vehicular weight.

Die casting is a manufacturing process in which molten metal is injected, under considerable pressure, into a hardened steel die or also called die casting mold. Dies are often water-cooled. The die is then opened, and the die casting parts are ejected; many times there are thousands of die casting parts each day and sometimes only a few hundred of them. Once the die casting tooling is paid for, die casting parts are a very inexpensive aluminum part manufacturing process.

High pressure die casting is the most widely used, representing about 50% of all light alloys casting production. Low pressure die casting currently accounts for about 20% of production and its use is increasing. Gravity die casting accounts for the rest, with the exception of a small but growing contribution from the recently introduced vacuum die casting and squeeze casting process.

Die casting alloys are normally non-ferrous and there is a large number available with a wide range of physical and mechanical properties covering almost every conceivable application a designer might require. Aluminum and zinc alloys are the most widely used, followed by magnesium, zinc-aluminum (ZA) alloys, copper, tin and lead.

Zinc, lead and tin based alloys are classified as low melting point metals because they turn melt at less than 725°F (385°C). Zinc-aluminum (ZA) alloys have a slightly higher melting range of 800°F to 900°F (426°C to 482°C). Aluminum and magnesium alloys are considered to be moderate melting point alloys, being cast in the 1150°F to 1300°F (621°C to 704°C) range. Copper alloys are considered to be high melting point alloys, over 1650°F (899°C).

Low melting point alloys are cast in hot chamber machines. Intermediate and high melting point alloys are cast in cold chamber machines.

The increasing number of applications and of products is the best proof of the success of aluminum alloys foundry, which is probably one of the most dynamic fields of manufacturing and engineering. The well-known advantages associated to the use of aluminum alloys, such as light weight, good mechanical behavior, good corrosion resistance etc, constitute the driving force for the introduction, on one hand, of new applications and designs and, on the other hand, for the development of new processing solutions. Various processes are now competing to achieve both economically and technologically advantageous production of aluminum alloys castings.

Aluminum castings are used for many industrial applications, for example in the automotive industry, applications includes wheels, cylinder blocks and heads, pistons, brake cylinders, and suspension arms. The substitution of aluminum cast components for ferrous castings in the automotive sector is predicted to continue to grow as automakers continue to seek opportunities to reduce vehicular weight.

The automotive manufacturing usage of aluminum alloy die casting continues to challenge metallurgists and production engineers, as greater emphasis is placed on product quality and production cost. At present, one of the main limits to a wide use of aluminum alloys for automotive applications is a lack of complete understanding of their thermal behavior and of the relationships to micro structural features.

Approximately half of all castings worldwide made of aluminum alloys are used for a wide range of automotive parts and other consumer goods. The machine part design influences the microstructure of the alloy, conditioning the cooling rate during solidification and, of consequence, may have important effects on the part performances.

The structural integrity of shaped castings is closely related to their temperature/time evolution during solidification. A number of analytical and numerical models were developed in the last two decades to treat heat transfer during solidification. The use of casting solidification simulation can do much to increase knowledge of the process; however, some uncertainties must be eliminated before such simulations can be accepted as fully realistic descriptions of the process in all situations.

The heat transfer at the casting–die interface is one of these uncertainties. The way the heat flows across the casting and die surface directly affects the evolution of solidification. The heat transfer coefficient is a critical parameter in solidification modeling. Figure 1 shows a summary of the influential parameters on thermal behavior in die casting process.



Figure 1: Influential parameters on thermal behavior in die casting process.

Procurar conhecimento básico

Colocar uma frase para procurar por:

Procurar por

Texto completo
Palavras chaves

Títulos
Resumo

Este artigo pertence a uma série de artigos. Você pode clicar nos links abaixo para ler mais sobre este tema.

O banco de dados da Total Materia contém muitos milhares de fundição de materiais através de uma grande variedade de países e padrões.

Quando disponíveis, informações de propriedade completa pode ser vista de materiais incluindo a composição química, propriedades mecânicas, propriedades físicas, dados de propriedades avançadas e muito mais.

Usando a página de pesquisa avançada, é possível pesquisar por materiais por suas principais palavras descritivas detalhadas no título padrão usando a função Standard Descrição da Pesquisa Avançada.

É talvez o que você precisa para estreitar ainda mais os critérios de pesquisa usando os campos na página de pesquisa avançada por exemplo, País / Standard.

Em seguida, clique em Enviar.


Uma lista de materiais será então gerado para você escolher.


Depois de clicar em um material a partir da lista resultante, uma lista de subgrupos derivados de especificações padrão aparece.

A partir daqui é possível ver os dados de propriedades específicas para o material selecionado e também para ver os materiais semelhantes e equivalentes em nossas poderosas tabelas de referência cruzada.


Por exemplo, clicando sobre o link composição química na página subgrupo é possível ver os dados de composição química para o material.

Para você é uma oportunidade de fazer um test drive na Total Materia, nós convidamos você a participar de uma comunidade de mais de 150.000 usuários registrados através da Total Materia Free Trial.