Ultrasonic Additive Manufacturing (UAM): Part One

Abstrakt:

Ultrasonic Additive Manufacturing (UAM) is essentially a hybrid of two AM process; sheet lamination and Computer Numerical Control (CNC).
Due to its specific process parameters UAM has several distinct applications including the manufacturing of functionally graded materials, structurally embedded electronic systems and fiber reinforced metal matrix composites.

Ultrasonic Additive Manufacturing (UAM) is a hybrid sheet lamination/Computer Numerical Control (CNC) manufacturing process. UAM utilizes Ultrasonic Welding (UW) to bond thin metal foils in a layer-by-layer fashion and periodic CNC machining to create the desired 3D shape. The technology was first introduced by White under the name of Ultrasonic Consolidation. During the bonding step, a cylindrical textured machine tool, called the sonotrode, is pressed at a constant normal force against the metal foil, which is kept in place via a clamping or tensioning mechanism. The sonotrode rolls over the foil while oscillating at a constant frequency of approx. 20 kHz perpendicular to the direction of travel (see Figure 1).



Figure 1: Schematic overview of Ultrasonic Additive Manufacturing (UAM)

Process parameters

UAM process parameters have a direct consequence on the quality of the final part. The important parameters in UAM are the ultrasonic amplitude (approximately 5-50μm), the applied normal force (500-2000N), the travel speed of the sonotrode horn (up to 50 mm/s), the texture of the sonotrode horn (Ra between 4 and 15 μm) and the substrate preheat temperature (up to 150°C). These parameters vary for different materials and need to be optimized for every material. The placement of foils and its orientation also play a major role in deciding the final properties of the part.

A commonly used parameter to represent the bond quality in UAM is linear weld density (LWD), which is given by:

LWD=Bonded interface length/Total interface length

Unbonded interfaces will show up as voids within the metal, parallel to the layering.

Applications of UAM

A. Functionally Graded Materials UAM can manufacture the FGM are used for the applications where high level mechanical as well as physical properties are required such as aerospace vehicle shields, rocket nozzles where the temperature reaches up to 2000°C. Other applications are the heat exchanger plates, lightweight armor plates for defense applications, heat engine components.

B. Structurally Embedded Electronic Systems In current industrial applications, the electric systems embedded in a solid enclosure or part are becoming essential so as to facilitate the portability, robustness and flexibility in the functioning. Thus UAM provides a single stroke method to produce better electrical applications such as embedded sensors and RFID, tamperproof electronics.

C. Fiber Reinforced Metal Matrix Composites UAM can be used to manufacture the MMC in which the matrix is a metal where as another component is fiber of Silicon Carbide (SiC) reinforced in the metal matrix. These fiber reinforced MMC manufactured by UAM are used I the applications such as airplane wing frames where the low weight and higher strength is expected. The F-16 Falcon fighting plane uses silicon carbide fibers in titanium matrix for structural components of the jet’s landing gear. Apart from these, other applications are golf clubs, fishing rods, brake parts, biological prosthetics etc.

Figure 2 shows the list of metal combinations that have been successfully tested in UAM.



Figure 2: List of metal combinations proven to work in UAM


References

1. A. Bournias-Varotsisa, R. J. Friel, R. A. Harrisc, D. S. Engstrøm: Ultrasonic Additive Manufacturing as a form-then-bond process for embedding electronic circuitry into a metal matrix, Journal of Manufacturing Process, Vol.32, April 2018, p.664-675;

2. C. K.Chua, K. F. Leong: 3D Printing and Additive Manufacturing: Principles and Applications Fifth Edition of Rapid Prototyping Fifth Edition, Chapter 4: Solid-Based Additive Manufacturing systems, World Scientific Publishing Company, 2016, p.109-135, ISBN:9813149280 and 9789813149281;

3. S. Choudhary: Study of Ultrasonic Additive Manufacturing, [Choudhary Suresh et al. , Vol. (3), No. (3): Aug 2017, p.330-334, Accessed March 2020.

Søk kunnskapsbase

Oppgi en søkefrase:

Søk etter

Full tekst
Nøkkelord

Overskrifter
Abstrakter

Total Materia has mechanical properties inserted for many thousands of materials and accessing them is just a click of a button away.

Covering a wide variety of property information, it is easy to find yield stress, tensile stress and elongation data for a huge number of materials within the database.

Enter the material of interest into the quick search field. You can optionally narrow your search by specifying the country/standard of choice in the designated field and click Search.

solution img

Total Materia will generate the search list for you to select the material of interest from the material list.
Click on the material of interest.

solution img

On the subgroup page, click the Mechanical Properties link to view property data for the selected material. The number of mechanical property data records is displayed in brackets next to the link.

solution img

The mechanical properties data will be then be displayed along with all selected material information for your reference.

The mechanical properties data will be displayed for all available conditions and treatments.

solution img

It is also possible to switch between metric (SI) and Anglo-Saxon units with one click depending on your preference.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.