Introduction to Additive Manufacturing: Part Six

요약:

Additive Manufacturing Material Extrusion processes have actually been in existence since the 1980’s and offer a rapid prototyping method to reduce the cost of an otherwise expensive field.
AM-ME can also be known by a number of other names including Direct Ink Writing or DIW, Fused Filament Fabrication or FFF, Extrusion Freeform Fabrication or EFF to name but a few.

In late 1980s Additive Manufacturing Material Extrusion (AM-ME) processes were identified as a part of rapid prototyping or fixtureless manufacturing. The AM-ME process is the one of Additive Manufacturing (AM) process. The AM process is the process of building products by layering a material directly from a Computer Aided Design (CAD) model in a structured manner to fabricate a component or assembly.

Additive Manufacturing Material Extrusion (AM-ME) is a form of rapid prototyping that offers the potential for reduction of cost and time as well as the possibility to create complex structures that are difficult or impossible to machine with common manufacturing techniques.

ISO/ASTM definition: “material extrusion—an additive manufacturing process in which material is selectively dispensed through a nozzle or orifice.”

Material Extrusion can also be known as (in alphabetical order):

  • Direct Ink Writing or DIW
  • Extrusion Freeform Fabrication or EFF
  • Fused Deposition Modeling‎ or FDM® (Stratasys Inc.)
  • Fused Filament Fabrication or FFF
  • Glass 3D Printing or G3DP
  • Liquid Deposition Modeling or LDM
  • Micropen Writing
  • Plastic Jet Printing or PJP (3D Systems Corporation)
  • Robocasting or Robotic Deposition

As Figure 1 shows, the Additive Manufacturing Material extrusion (AM-ME) process is a layering technology where each layer is built from extruded beads of material – typically a thermoplastic. In the AM-ME process, the material is extruded through a nozzle, where it is heated and then deposited in beads placed side by side. The component or assembly is built incrementally, layer by layer. The nozzle can move along the X and Y axes horizontally, and a platform (or deposition head) moves up or down vertically after each new layer is deposited.



Figure 1: Material extrusion process

The layers are positioned from bottom to top in AM-ME process. For example, the first layer in Figure 2 (a) is built as nozzle deposits material where required onto the cross-sectional area of the cylinder. The following layers are added on top of previous layers. Layers are fused together upon deposition as the material is in a melted state. Figure 2 (b) shows a top view of the last layer which is layer 4. The top view shows how the nozzle had moved during the process, and how the toolpath creates voids. This process is independent of material in AM-ME. The next section explains types of material in AM-ME and names some of them in industry.



Figure 2: (a) A four-layer cylinder, (b) Top view of the cylinder

There are two types of material in the AM-ME process which are the build material and support material. As it shows, for producing Figure 3 (a), the build material, red part of Figure 3 (b), and the support material, gray part of Figure 3 (c), are used during the process. In the end, the support material is needed to remove from Figure 3 (c) to get Figure 3 (a).



Figure 3: Build and support materials


References

1. H. Eiliat: Development of Optimal Material Extrusion Additive Manufacturing Tool Path Parameters for Minimizing Void Regions Using Contemporary Tool Path Solutions, 2018. Electronic Theses and Dissertations. University of Windsor, Windsor, Ontario, Canada, 7464;

2. D. Braconnier: Materials informatics approach to material extrusion additive manufacturing, MSc thesis, Worcester Polytechnik Institute, April 2018, Accessed DEC 2018;

3. C. Silbernagel: Additive manufacturing 101-3: what is material extrusion?, Accessed DEC 2018.

기술 자료 검색

검색할 어구를 입력하십시오:

검색 범위

본문
키워드

머릿글
요약

화학 조성을 Total Materia 데이터베이스에서 검색하는 것은 매우 쉽습니다.

몇 초 내로 데이터베이스 내 175,000개 이상의 재질에서 유용한 화학 조성 데이터를 검색하는 것이 가능합니다.

신속 검색에 검색할 재질명을 입력합니다. 원하신다면 국가/규격을 지정하신 후 검색 버튼을 클릭합니다.


Total Materia 데이터베이스에서 검색된 관심 재질의 목록이 즉시 생성됩니다.
관심 재질을 클릭합니다.


소그룹 페이지에서, 선택된 재질의 화학 조성 링크를 클릭하여 데이터를 검토합니다. 화학 조성 데이터 기록의 개수는 링크 옆 괄호 안에 표시됩니다.


화학 조성 데이터는 참조를 위해 선택한 모든 재질 정보와 함께 표시됩니다.


Total Materia 데이터베이스를 사용해 보실 수 있는 기회가 있습니다. 저희는 Total Materia 무료 체험을 통해 150,000명 이상의 사용자가 이용하고 있는 커뮤니티로 귀하를 초대합니다.