Silicon Carbide (SiC): Part One


Originally produced using a high temperature electro-chemical reaction of sand and carbon, silicon carbide is recognized as one of the most promising structural materials due to its excellent high temperature strength, good oxidation, and thermal shock resistance to name just a few advantages.
The secret of these excellent attributes lies in the composition of the material which is composed of tetrahedra of carbon and silicone atoms which inherently display extremely strong bonds within the crystal lattice.

Silicon carbide (SiC) has been recognized as one of the most promising structural materials for many mechanical or thermomechanical applications because of its excellent high-temperature strength, good oxidation and thermal shock resistance, high hardness, and low specific weight. It is the only chemical compound of carbon and silicon. It was originally produced by a high temperature electro-chemical reaction of sand and carbon.

Silicon carbide is an excellent abrasive and has been produced and made into grinding wheels and other abrasive products for over one hundred years. Today the material has been developed into a high quality technical grade ceramic with very good mechanical properties. It is used in abrasives, refractories, ceramics, and numerous high-performance applications. The material can also be made an electrical conductor and has applications in resistance heating, flame igniters and electronic components. Structural and wear applications are constantly developing.

As mentioned above, the monolithic SiC ceramics and SiC-based ceramic composites are promising structural materials because of their excellent heat resistance and mechanical properties. Moreover, silicon carbide fibre-reinforced composites are of specific interest for future thermonuclear fusion reactor applications as they exhibit a low radioactivity by neutron transmutations, a high stability after the reactor shut-down, good high-temperature properties, a low plasma contamination and a low specific weight.

Silicon Carbide Production

Silicon Carbide is derived from powder or grain, produced from carbon reduction of silica. It is produced as either fine powder or a large bonded mass, which is then crushed. To purify (remove silica) it is washed with hydrofluoric acid.

There are three main ways to fabricate the commercial product. The first method is to mix silicon carbide powder with another material such as glass or metal, this is then treated to allow the second phase to bond.

Another method is to mix the powder with carbon or silicon metal powder, which is then reaction bonded.

Finally silicon carbide powder can be densified and sintered through the addition of boron carbide or other sintering aid. It should be noted that each method is suited to different applications.

Key Silicon Carbide Properties

  • Low density
  • High strength
  • Low thermal expansion coefficient
  • High thermal conductivity
  • Extreme hardness
  • High elastic modulus
  • Excellent thermal shock resistance
  • Superior chemical inertness
  • Semiconductor
  • Refractive index greater than a diamond

Silicon Carbide Typical Uses

  • Fixed and moving turbine components
  • Suction box covers
  • Seals, bearings
  • Ball valve parts
  • Hot gas flow liners
  • Heat exchangers
  • Semiconductor process equipment

Table 1: Common values of the Silicon Carbide properties

Silicon carbide is composed of tetrahedra of carbon and silicon atoms with strong bonds in the crystal lattice. This produces a very hard and strong material. Silicon carbide is not attacked by any acids or alkalis or molten salts up to 800°C. In air, SiC forms a protective silicon oxide coating at 1200°C and is able to be used up to 1600°C. The high thermal conductivity coupled with low thermal expansion and high strength gives this material exceptional thermal shock resistant qualities. Silicon carbide ceramics with little or no grain boundary impurities maintain their strength to very high temperatures, approaching 1600°C with no strength loss.

Chemical purity, resistance to chemical attack at temperature, and strength retention at high temperatures has made this material very popular as wafer tray supports and paddles in semiconductor furnaces. The electrical conduction of the material has lead to its use in resistance heating elements for electric furnaces, and as a key component in thermistors (temperature variable resistors) and in varistors (voltage variable resistors).

Figure 1: Silicon Carbide products

기술 자료 검색

검색할 어구를 입력하십시오:

검색 범위



Total Materia는 수천개의 재질에 대한 기계적 특성 테이터가 포함되어 있으며, 데이터를 검토하는 것은 매우 쉽습니다.

데이터베이스는 다양한 특성 정보를 포함하고 있으며, 수 많은 재질의 항복 응력, 인장 응력과 연신율은 데이터를 쉽게 찾을 수 있을 것입니다.

신속 검색에 검색할 재질명을 입력합니다. 원하신다면 국가/규격을 지정하신 후 검색 버튼을 클릭합니다.

Total Materia 데이터베이스에서 검색된 관심 재질의 목록이 즉시 생성됩니다.
관심 재질을 클릭합니다.

소그룹 페이지에서, 선택된 재질의 기계적 특성 링크를 클릭하여 데이터를 검토합니다. 기계적 특성 데이터 기록의 개수는 링크 옆 괄호 안에 표시됩니다.

기계적 특성 데이터는 참조를 위해 선택한 모든 재질 정보와 함께 표시됩니다.

기계적 특성 데이터는 가능한 모든 조건과 처리 상태에 대해 표시됩니다.

또한 한 번의 클릭으로 귀하의 선택에 따라 단위 값을 메트릭(SI)과 앵글로 색슨 단위로 전환할 수도 있습니다.

Total Materia 데이터베이스를 사용해 보실 수 있는 기회가 있습니다. 저희는 Total Materia 무료 체험을 통해 150,000명 이상의 사용자가 이용하고 있는 커뮤니티로 귀하를 초대합니다.