AlMg Alloys: Part One

概要:

AlMg alloys have a wide range of advantageous characteristics which means they can be used in many different applications, with many being in extreme temperatures or other aggressive environments.
A prime example of such materials can be seen in the 5xxx series of alloys which display excellent corrosion resistance in combination with very good mechanical properties to cope in the harshest conditions such as marine environments.

Al-Mg alloys of the 5xxx series are strain hardenable, and have moderately high strength, excellent corrosion resistance even in salt water, and very high toughness even at cryogenic temperatures to near absolute zero. They are readily welded by a variety of techniques, even at thicknesses up to 20 cm. As a result, 5xxx alloys find wide application in building and construction, highways structures including bridges, storage tanks and pressure vessels, cryogenic tankage and systems for temperatures as low as -270°C (near absolute zero), and marine applications.

Al-Mg alloys are used in non-heat treatable, sand, permanent mold and die castings. These alloys show good corrosion resistance in most natural fresh waters and in chemical media.

Magnesium has significant solubility in aluminum and imparts substantial solid solution strengthening (which can also contribute to enhanced work hardening characteristics). The 5xxx series alloys (containing <~6% Mg) do not age harden. Whilst it is possible for β-phase (Mg2Al3) to precipitate in systems with above ~3%Mg, the β-phase is not a strengthening precipitate and actually weakens the alloy (by depleting the solute of Mg).

Nominally, the corrosion resistance of 5xxx series alloys is good and their mechanical properties make them ideally suited for structural use in aggressive conditions (such as marine vessels). Fully work-hardened AA5456 (Al-4.7Mg-0.7Mn-0.12Cr) has a tensile strength of >380MPa. One corrosion issue with fully work-hardened 5xxx series alloys is that the heavy dislocation density (and supersaturation of the solid solution with Mg) can permit the sensitization of the microstructure by precipitation of deleterious β-phase (Mg2Al3) during sustained high temperature exposure (i.e. in service).

Al-Mg alloys have various applications in transport, packaging and general engineering industries. As mentioned above, they belong to the group of non-heat treatable Al alloys which derive their strength mainly from solution strengthening and work hardening during deformation. Cold deformation is particularly effective in strengthening since restoration processes are thermally activated.

The strength of Al-Mg alloys strongly increases with the addition of Mg. Mg has a high solubility in solid solutions and therefore it provides the most effective enhancement of strength among all alloying additions in the aluminum solid solution. Mg, like other solute elements, has a strong influence on recrystallization and grain growth. It also serves to reduce both the rate of growth and the final grain size.

Work-hardening wrought Al-Mg alloys which are also known commercially as the 5xxx series aluminum-based alloys are currently being used as automotive BIW materials. Magnesium is the principal alloying element and is added for solid solution strengthening. Generally Al-Mg alloys used in BIW applications have very good formability; relatively low yield stress and work harden during cold working. Alloy grades that have been used extensively as automotive BIW materials are listed in Table 2.3. Nominal values of their mechanical properties are shown in Table 2.4. The alloys are supplied to the BIW press shop in an annealed temper, designated as - O temper.



Table 2.3.: Composition of commonly used Al-Mg alloys used for automotive BIW components in weight percent with Al as remainder



Table 2.4.: Mechanical properties of commonly used Al-Mg alloys used for automotive BIW components

5xxx - Al-Mg Alloys Information

  • Strain hardenable
  • Excellent corrosion resistance, toughness, weldability; moderate strength
  • Building & construction, automotive, cryogenic, marine applications
  • Representative alloys: 5052, 5083, 5754, etc.
  • Typical ultimate tensile strength range: 124-350 MPa (18-51 ksi)

ナレッジベース検索

検索したい語句を入力:

検索方法

全文一致
キーワード

前方一致
要約

Total Materiaデータベースは世界の国々と広範な規格に関する数千種類のアルミ材料に関するデータを収録しております。

必要に応じて、化学組成分、機械的特性、物理特性、高度な特性等々の材料特性を御覧になれます。

高度な検索のページで材料グループのポップアップリストから’アルミニウム(Aluminum)’を選び検索条件を決定します。さらに国/規格のフィールドを使い検索条件を絞ることもできます。

確定をクリックします。


選んだ材料の材料リストが表示されます。


結果リストで材料をクリックすると規格から導きだされるサブグループリストが表示されます。

そこから選んだ材料の特性を見る事ができさらにパワフルな相互参照表により類似材料、同等材料をみることもできます。


対象とする材料の特性データをクリックします。




Total Materiaデータベースをあなたにテスト評価を頂くために15万人以上の方が登録されている無料お試しコミュニティ-へ御招待致します。