Copper Beryllium Alloys

Sommario:

The addition of beryllium in copper alloy materials gives a substantial increase in strength without resulting in brittle behavior.
Due to these improved properties, beryllium alloys are used widely in the aviation industries in components which require high strength and a high tolerance to wear.

Beryllium metal is used in a variety of alloys including the alloy, copper beryllium. Beryllium-copper alloys are amongst the strongest of the copper alloys. They are commonly used at cryogenic temperatures where, like other copper alloys, they do not become brittle. They can be machined relatively easily, and are readily joined by soft soldering or brazing. Handling and most machining operations concerning beryllium-copper alloys are considered non-hazardous.

In the aviation industry copper beryllium has been used in a variety of components due to its strength and tolerance to wear and its’ electricity conductivity (e.g. high load and stress bushes on aircraft under carriage and propeller electrical contact slip rings).



Figure 1: Equilibrium diagram of copper-beryllium alloys

The literature contains many additional references on the properties of copper-beryllium alloys. Most of these, however, pertain to the response of copper-beryllium alloys to precipitation heat treatment, to their forming characteristics, and to their use for specific applications with little or no data that can be used for general engineering design.

There are two classes of copper beryllium alloys: High Strength Copper Beryllium has the highest strength of any copper alloy, and offers good thermal and electrical conductivity’s. Depending on the product form, the tensile strength can exceed 200,000 psi (140 kg/mm2), with an electrical conductivity in the range of 18-25% IACS, and a thermal conductivity of 60 BTU/ft·hr·°F (105 W/m·K). The high conductivity of copper beryllium alloys offers considerably better conductivity’s (50-60% IACS and 145 BTU/ft·hr·°F, 250 W/m·K) at a moderate strength level of about 120,000 psi (85 kg/mm2).

The high conductivity copper beryllium alloys are diamagnetic and have magnetic behavior similar to metallic copper. The high strength alloys, typical of most copper alloys, are weakly paramagnetic. Table 1 lists copper beryllium’s typical magnetic properties as determined by the Gouy balance and vibrating sample magnetometry techniques.



Table 1: Magnetic Properties (cgs units at 1000 Gauss) of Copper Beryllium

Copper beryllium’s magnetic properties are constant over the entire strength range of the alloys. The magnetic properties are not temperature dependent from liquid helium to above room temperature. Figure 2 shows that magnetic field strength has a minor influence on the magnetic properties of copper beryllium.



Figure 2: Effect of field strength on the magnetic susceptibility (volume) of Copper Beryllium

Cold work or plastic deformation does not change the magnetic performance of copper beryllium. As a result of cold work, which may occur in service, some nonmagnetic austenitic stainless steels transform to ferromagnetic martensite. As shown in Figure 3, deformation increases the susceptibility of the stainless steel while it has no effect on copper beryllium. The localized deformation from machining or surface abuse can result in magnetic hot spots in stainless steel. The martensitic transformation in stainless steels occurs more readily at low temperatures. Accumulated strains, resulting from thermal cycling to low temperature, can cause a deterioration in nonmagnetic quality in stainless steel. This is not a problem with copper beryllium.



Figure 3: Effect of deformation on magnetic susceptibility of Copper Beryllium and Stainless Steel

Criteri di ricerca
Inserite il vostro testo in inglese per la ricerca:

Ricerca tramite

Ricerca tramite

Testo completo
Intestazioni

Articolo
Sommario

Il database Total Materia contiene molte migliaia di leghe di rame appartenenti a una vasta gamma di Paesi e Normative.

Quando disponibili, vengono visualizzate informazioni sulle proprietà: composizione chimica, proprietà meccaniche, proprietà fisiche, dati sulle proprietà avanzate e molto altro ancora.

Utilizzando la pagina di Ricerca Avanzata, si seleziona 'Rame' nel gruppo di materiali dalla lista a discesa. Nel caso in cui occorra affinare la ricerca si utilizzano gli altri campi disponibili (es. Paese/Normativa, numerazione della Normativa, composizione chimica, prop. meccaniche etc.).

Quindi si clicca si "Invio" e il programma esamina tutte le leghe del Database che rispettano i dati inseriti.


Alla fine viene mostrato un elenco di materiali da selezionare ulteriormente.


Dopo aver cliccato su un materiale risultante dalla lista, compare un elenco di Sottogruppi derivati ​​dalle varie Normative che comprendono la lega selezionata.

Da qui in avanti è possibile visualizzare i dati di Proprietà per il materiale selezionato e visualizzare materiali simili o equivalenti nella sezione delle Corrispondenze incrociate.


Cliccare sui link delle proprietà per visualizzare i dati delle specifiche proprietà di interesse.

Per consentirvi di testare il Database Total Materia "senza impegno", vi invitiamo a unirvi alla comunità degli Utenti registrati per i test gratuiti a Total Materia.