ASTM Standard List - Structural and Constructional Steels Standards: Part Five


ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.

This article contains a list of standards that covers among other things:

  • Bolts, bars and piping used specifically in the construction industry
  • Steel wires for masonry joining applications
  • Carbon steel sheets with ultra-high strengths

For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.

Structural and Constructional Steels: Part Five

Description Status
A 896 2009 Standard Practice for Conducting Case Studies on Galvanized Structures /no materials/
A 905 2004 Steel Wire, Pressure Vessel Winding /2/
A 906/A 906M 2002 Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting /no materials/
A 907/A 907M 1996 Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality Replaced by A1018/A1018M /4/
A 910/A 910M 2005 Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete /2/
A 911/A 911M 2005 Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties /1/
A 913/A 913M 2007 High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) /4/
A 914/A 914M 2005 Steel Bars Subject to Restricted End-Quench Hardenability Requirements /23/
A 920/A 920M 2007 Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties /36/
A 921/A 921M 2005 Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging /6/
A 936/A 936M 1997 Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability Replaced by A1018/A1018M /4/
A 945/A 945M 2006 High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness /2/
A 951/A 951M 2006 Steel Wire for Masonry Joint Reinforcement /1/
A 960/A 960M 2008 Common Requirements for Wrought Steel Piping Fittings /no materials/
A 961/A 961M 2008 Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications /no materials/
A 962/A 962M 2009 Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range /no materials/
A 963/A 963M 1997 Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled Replaced by A1008/A 1008M /no materials/
A 964/A 964M 2003 Corrugated Steel Box Culverts /no materials/
A 969/A 969M 1997 Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled Replaced by A1008/A 1008M /no materials/
A 970/A 970M 2009 Headed Steel Bars for Concrete Reinforcement /no materials/
A 973/A 973M 2007 Grade 100 Alloy Steel Chain /no materials/
A 979/A 979M 2009 Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field /no materials/
A 980 2003 Steel, Sheet, Carbon, Ultra High Strength Cold Rolled /4/
A 984/A 984M 2009 Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded /8/
A 992/A 992M 2006 Structural Steel Shapes /1/
A 994 2009 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys /no materials/
A 996/A 996M 2009 Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement /6/
A 1005/A 1005M 2004 Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded /5/
A 1006/A 1006M 2004 Steel Line Pipe, Black, Plain End, Laser Beam Welded /5/
A 1007 2007 Carbon Steel Wire for Wire Rope /no materials/
A 1008/A 1008M 2009 Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable /43/
A 1014/A 1014M 2009 Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service /1/
A 1017/A 1017M 2007 Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten /3/
A 1018/A 1018M 2009 Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength Steel /55/
A 1020/A 1020M 2007 Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications /3/
A 1030/A 1030M 2005 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products /no materials/
A 1031 2009 Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled /49/
A 1035/A 1035M 2009 Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement /2/
A 1040 2009 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels /341/
A 1041/A 1041M 2009 Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten /2/
A 1042/A 1042M 2009 Composite Corrugated Steel Pipe for Sewers and Drains /no materials/
A 1043/A 1043M 2009 Structural Steel with Low Yield to Tensile Ratio for Use in Buildings /4/
A 1044/A 1044M 2005 Steel Stud Assemblies for Shear Reinforcement of Concrete /2/
F 432 2008 Roof and rock bolts and accessories /5/
F 436 2009 Hardened steel washers /2/
F 541 2004 Alloy steel eyebolts /2/
F 568M 2007 Carbon and alloy steel externally threaded metric fasteners /19/

Search Knowledge Base

Enter a phrase to search for:

Search by

Full text


With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.

solution img

By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from ASTM by selecting this SDO from the popup.

solution img

The result list consists of over 3000 ASTM metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.

solution img

By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.

solution img

From the list of materials, you can review detailed properties and equivalents of each material.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.