DIN 1.1138 Cast steels
Data updates
This material has 141 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1138 Chemical Composition
SEW 685: 2019 / Cryogenic steel casting/steel castings having high impact strength at low temperatures - Technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
DIN 1.1138 Physical Properties
Temperature
This material has 141 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1138 Heat Treatments
- (+N): Austenitized or solutionized at 900-940°C, cooled in air, water or polymer.
(+QT): Austenitized or solutionized at 900-940°C, cooled in air, water or polymer. Annealed at 620-660°C - Hardened: 900 to 940°C, after reaching the temperature in total cross-sectional area, liquid cooling; Tempered: 620 to 660°C, 3 min/mm wall thickness, but not less than 1h holding time, cooling in the furnace or in still air; Stress relieved: 600 to 640°C, but at least 20°C below the tempering temperature, 3 min/mm wall thickness, but not less than 1h holding time, cooling in the furnace or in still air.
DIN 1.1138 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book a Demo
-
50 Cross References
-
12 Composition
-
22 Mechanical Properties
-
7 Physical Properties
-
2 Heat Treatment
-
- Metallography
-
- Machinability
-
- Stress-Strain
-
- Formability
-
- Fatigue
-
- Fracture
-
- Creep
-
- Joints
-
- Coatings
-
- Dimensions
-
- Tribology
-
- Corrosion
-
- Ageing
-
- Weatherability
-
- Irradiation
-
48 Total Suppliers