Contact Us
Solve Your Materials Challenges
Start Free Trial
The specifications begin with the prefix JIS, followed by a letter, where the letter denotes the area of division, followed by four digits. Japanese JIS standards are widely used in Asia and the Pacific areas. JIS steel specifications have also often been used as a base for other national systems, such as Korean, Chinese, and Taiwanese.
JIS standards are developed by the Japanese Industrial Standards Committee (JISC) in Tokyo with an aim to promote the industrial standards of Japan. The below list contains standards for the following material categories:
For more information on the JIS designation system see Introduction to the JIS Standard Designation System.
The list of standards below covers a wide range of materials and applications a few of which are:
| Standard Number | Last version | Description | Status |
| B 0403 | 1995 | Castings - System of dimensional tolerances and machining allowances | |
| B 0407 | 1978 | Permissible deviations in dimensions without tolerance indication for iron castings | Replaced by JIS B 0403:1995 |
| B 0412 | 1978 | Permissible deviations in dimensions without tolerance indication for steel castings | Replaced by JIS B 0403:1995 |
| B 0703 | 1987 | Roundness of castings | |
| B 2031 | 1994 | Gray cast iron valves | |
| F 2002 | 1976 | Cast iron dog type chain cable compressors | Withdrawn 1999 |
| F 2003 | 1995 | Cast iron deck end rollers | Withdrawn 1999 |
| F 2015 | 1987 | Cast steel bar type chain cable stoppers | Replaced by JIS F 2031:1998 |
| F 2019 | 1979 | Cast iron deck end rollers (small size) | Withdrawn 1999 |
| F 3058 | 1996 | Cast steel vertical storm valves | |
| F 3060 | 1996 | Cast steel screwdown vertical storm valves | |
| G 0307 | 1998 | Steel castings - General technical delivery requirements | |
| G 0585 | 2002 | Radiographic inspection for steel castings | |
| G 5101 | 1991 | Carbon steel castings | |
| G 5102 | 1991 | Steel castings for welded structure | |
| G 5111 | 1991 | High tensile strength carbon steel castings and low alloy steel castings for structural purposes | |
| G 5121 | 2003 | Corrosion-resistant cast steels for general applications | |
| G 5122 | 2003 | Heat-resistant cast steels and alloys for general applications | |
| G 5131 | 2008 | High manganese steel castings | |
| G 5151 | 1991 | Steel castings for high temperature and high pressure service | |
| G 5152 | 1991 | Steel castings for low temperature and high pressure service | |
| G 5201 | 1991 | Centrifugally cast steel pipes for welded structure | |
| G 5202 | 1991 | Centrifugally cast steel pipes for high temperature and high pressure service | |
| G 5501 | 1995 | Grey iron castings | |
| G 5502 | 2001 | Spheroidal graphite iron castings | |
| G 5503 | 1995 | Austempered spheroidal graphite iron castings | |
| G 5504 | 2005 | Heavy-walled ferritic spheroidal graphite iron castings for low temperature service | |
| G 5510 | 1999 | Austenitic iron castings | |
| G 5511 | 1991 | Low thermal expansive Fe-alloy castings | |
| G 5525 | 2000 | Cast-iron drainage pipes and fittings | |
| G 5703 | 1988 | Whiteheart malleable iron castings | Replaced by JIS G 5705:2000 |
| G 5704 | 1988 | Pearlitic malleable iron castings | |
| G 5705 | 2000 | Malleable iron castings | |
| G 5903 | 1975 | Cast shot and grit |
| Standard Number | Last version | Description | Status |
| B 0415 | 1975 | Dimensional tolerance for steel die forgings (hammer and press forging) | |
| B 0416 | 1975 | Dimensional tolerance for steel die forgings (upsetting) | |
| B 0418 | 1999 | Machining allowance for open die forgings | |
| B 0706 | 1987 | Corner and fillet radii of forged parts (hot and warm forgings) | |
| B 5013 | 1994 | Die sets for press dies | Withdrawn 2001 |
| G 0306 | 1988 | Steel forgings - General technical requirements | |
| G 3201 | 1988 | Carbon steel forgings for general use | |
| G 3202 | 1988 | Carbon steel forgings for pressure vessels | |
| G 3203 | 1988 | Alloy steel forgings for pressure vessels for high-temperature service | |
| G 3204 | 1988 | Quenched and tempered alloy steel forgings for pressure vessels | |
| G 3205 | 1988 | Carbon and alloy steel forgings for pressure vessels for low-temperature service | |
| G 3206 | 1993 | High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service | |
| G 3214 | 1991 | Stainless steel forgings for pressure vessels | |
| G 3221 | 1988 | Chromium molybdenum steel forgings for general use | |
| G 3222 | 1988 | Nickel chromium molybdenum steel forgings for general use | |
| G 3223 | 1988 | High tensile strength steel forgings for tower flanges | |
| G 3251 | 1988 | Carbon steel blooms and billets for forgings | |
| G 3545 | 1991 | Boron steel wires for cold heading and cold forging | Replaced by JIS G 3508-2:2005 |
| G 4315 | 2000 | Stainless steel wires for cold heading and cold forging | |
| G 4319 | 1991 | Stainless steel blooms and billets for forgings | |
| G 4320 | 2003 | Cold-formed stainless steel sections | |
| G 4321 | 2000 | Stainless steel for building structure | |
| G 4322 | 2008 | Stainless steel bars for concrete reinforcement | |
| G 4901 | 1999 | Corrosion-resisting and heat-resisting superalloy bars | |
| G 4902 | 1991 | Corrosion-resisting and heat-resisting superalloy plates and sheets | |
| G 4903 | 2008 | Seamless nickel-chromium-iron alloy pipes | |
| G 4904 | 2008 | Seamless nickel-chromium-iron alloy heat exchanger tubes |
| Standard Number | Last version | Description | Status |
| G 4316 | 1991 | Stainless steel wire rods for welding | |
| Z 3252 | 2001 | Covered electrodes for cast iron | |
| Z 3322 | 2002 | Materials for stainless steel overlay welding with strip electrode | |
| Z 3422-1 | 2003 | Specification and approval of welding procedures for metallic materials - Welding procedure tests - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| Standard Number | Last version | Description | Status |
| H 2601 | 1983 | Iron powder | Withdrawn 2000 |
| Z 2500 | 2000 | Powder metallurgy - Vocabulary | |
| Z 2501 | 2000 | Sintered metal materials - Determination of density, oil content, and open porosity | |
| Z 2502 | 2000 | Metallic powders - Determination of flowability by means of a calibrated funnel (Hall flowmeter) | |
| Z 2503 | 2000 | Powders for powder metallurgical purposes - Sampling | |
| Z 2550 | 2000 | Sintered metal materials - Specification |
Total Materia is the leading materials information platform, providing the most extensive information on metallic and non-metallic material properties and other material records.
All this information is available in Total Materia Horizon, the ultimate materials information and selection tool, providing unparalleled access to over 540,000 materials as well as, curated and updated reference data.
Total Materia Horizon includes: