AA 6061 Алюминиевый сплав

Группа материала: Цветныe Сплавы / Алюминиевый сплав

Страна/Стандарт: Соединенные Штаты / AA

Индикативная цена:

Обновления данных

Последнее обновление: 2025-09

Общее количество обновлений: 7

История обновлений

2025-08 2022-11 2020-09 2020-07 2019-05 2016-02

Этот материал содержит 2958 свойства — здесь показана только часть.

Откройте полный набор свойств, включая подробные значения для различных температур и условий.

AA 6061 Химический состав

Критерий

Значение

Единица

Номер CAS

Критерий

Значение

Остаток

Единица

Номер CAS

7429-90-5

Критерий

Значение

0.04 – 0.35

Единица

Номер CAS

7440-47-3

Критерий

Значение

0.15 – 0.40

Единица

Номер CAS

7440-50-8

Критерий

Значение

val1

Единица

Номер CAS

7439-89-6

Критерий

Значение

val1

Единица

Номер CAS

7439-95-4

Критерий

Значение

val1

Единица

Номер CAS

7439-96-5

Критерий

Other each

Значение

val1

Единица

Номер CAS

Критерий

Other total

Значение

val1

Единица

Номер CAS

Критерий

Значение

val1

Единица

Номер CAS

7440-21-3

Критерий

Значение

val1

Единица

Номер CAS

7440-32-6

Критерий

Значение

val1

Единица

Номер CAS

7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Нужны полные данные о характеристиках материала?

AA 6061 Физические свойства

Температура

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Свойство/Значение

Модуль упругости

val1 GPa

Открыть полные данные

Теплопроводность

val1 W/(m∙°C)

Открыть полные данные

Удельное электрическое сопротивление

val1 Ω∙mm²/m

Открыть полные данные

Плотность

val1 kg/dm³

Открыть полные данные

Электропроводность

val1 S/m

Открыть полные данные

Теплоемкость

val1 J/(kg∙°C)

Открыть полные данные

Температура плавления

val1 °C

Открыть полные данные

Коэффициент Пуассона

val1

Открыть полные данные

Коэффициент теплового расширения (CTE)

val1 10^-6/°C

Открыть полные данные

Этот материал содержит 2958 свойства — здесь показана только часть.

Откройте подробные значения физических свойств для различных температур и условий.

AA 6061 Термическая Обработка

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

For sheet

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For plate

Temper T4 (applies only to tread plate): Solution heat treated at 530°C, quenched, naturally aged.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6 (applies only to tread plate): Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For rolled or cold finished wire, rod and bar

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T3: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T89: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T913: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T94: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For extruded rod, bar, profiles and tube

Temper T1: Quenched directly from the extrusion press, naturally aged. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4510: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4511: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T51: Quenched directly from the extrusion press, precipitation heat treated at 175°C for 8 hours. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6510: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6511: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours.

For structural profiles

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For drawn pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For die and hand forgings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

For rolled rings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T452: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

Temper T652: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove effects of solution heat treatment and include cooling at a rate of about 30°C per hour from the annealing temperature to 260°C. The rate of subsequent cooling is unimportant. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 6061 Механические свойства

Температура

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Свойство/Значение

Предел прочности

105 — 328.5 MPa

Открыть полные данные

Твердость по Бринеллю (HB)

val1

Открыть полные данные

Относительное удлинение, A

val1 %

Открыть полные данные

Предел текучести, Rp0.2

val1 MPa

Открыть полные данные

Энергия удара

val1 J

Открыть полные данные

Уменьшение площади

val1 %

Открыть полные данные

Твердость по Виккерсу (HV)

val1

Открыть полные данные

Нужны полные механические свойства для принятия правильного решения?

Получите полные данные о прочности, твердости, усталости и многом другом.

Международные эквивалентные материалы для AA 6061

Показано 15 из 264 результатов.

Материал

Стандарт

Страна / Производитель

Категория эквивалентности

Материал

A96061

Стандарт

UNS

Страна / Производитель

Соединенные Штаты

Категория эквивалентности

Официальные

Материал

1330

Стандарт

ГОСТ

Страна / Производитель

Россия

Категория эквивалентности

Официальные

Материал

1340

Стандарт

ГОСТ

Страна / Производитель

Россия

Категория эквивалентности

Официальные

Материал

A 6061 FD

Стандарт

JIS

Страна / Производитель

Япония

Категория эквивалентности

Официальные

Материал

AB 6061

Стандарт

ABS

Страна / Производитель

Соединенные Штаты

Категория эквивалентности

Официальные

Материал

AD33

Стандарт

ГОСТ

Страна / Производитель

Россия

Категория эквивалентности

Официальные

Материал

Стандарт

ГОСТ

Страна / Производитель

Россия

Категория эквивалентности

Официальные

Материал

65032

Стандарт

Страна / Производитель

Индия

Категория эквивалентности

Официальные

Материал

6061

Стандарт

ISO

Страна / Производитель

Международная

Категория эквивалентности

Официальные

Материал

A 6061 FH

Стандарт

JIS

Страна / Производитель

Япония

Категория эквивалентности

Официальные

Материал

A 6061P

Стандарт

JIS

Страна / Производитель

Япония

Категория эквивалентности

Официальные

Материал

A 6061 BE

Стандарт

JIS

Страна / Производитель

Япония

Категория эквивалентности

Официальные

Материал

AlMg1SiCu

Стандарт

ISO

Страна / Производитель

Международная

Категория эквивалентности

Официальные

Материал

A 6061T

Стандарт

JIS

Страна / Производитель

Япония

Категория эквивалентности

Официальные

Материал

L-3420

Стандарт

UNE

Страна / Производитель

Испания

Категория эквивалентности

Официальные

Категории эквивалентности основаны на сравнении химического состава и механических свойств — всегда проверяйте соответствие требованиям спецификации для вашего применения.

Нужен полный список из 264 международных эквивалентов?

Просмотрите все 264 эквивалентных марок с подробным сопоставлением по стандарту, производителю и категории эквивалентности.

Оптимизируйте подбор материалов для вашей задачи - Записаться на демо

Хотите сравнивать материалы и принимать более обоснованные решения?

Получите доступ к надежным данным о материалах, сравнивайте варианты и принимайте решения быстрее.

С Total Materia вы можете:

Сравнивать материалы на основе реальных инженерных данных

Находить аналоги материалов в различных стандартах

Оценивать характеристики для ваших конкретных условий

Проверять соответствие глобальным нормативным требованиям

Посмотрите, как это работает для вашей задачи

Пройти обзорный тур

264Перекрестные ссылки

22Состав
1237Механические Свойства
307Физические Свойства
5Термообработка
15Металлография
1Oбрабатываемость

304Напряжение-деформация
14Формуемость
168Усталость
10Разрушение
20Урод

46Соединения
-Покрытия
-Размеры
5Трибология

39Коррозия
391Старение Материалов
-Атмосферостойкость
13Облучение

97Всего поставщиков