AA 6061 Liga de alumínio

Grupo do Material: Ligas Não Ferrosas / Liga de alumínio

País/Norma: Estados Unidos / AA

Preço indicativo:

Atualizações de dados

Última Atualização: 2025-09

Número total de atualizações: 7

Histórico de Atualizações

2025-08 2022-11 2020-09 2020-07 2019-05 2016-02

Este material conta com 2958 propriedades — apenas uma parte está sendo exibida aqui.

Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.

AA 6061 Composição química

Critério

Valor

Unidade

Número CAS

Critério

Valor

Restante

Unidade

Número CAS

7429-90-5

Critério

Valor

0.04 – 0.35

Unidade

Número CAS

7440-47-3

Critério

Valor

0.15 – 0.40

Unidade

Número CAS

7440-50-8

Critério

Valor

val1

Unidade

Número CAS

7439-89-6

Critério

Valor

val1

Unidade

Número CAS

7439-95-4

Critério

Valor

val1

Unidade

Número CAS

7439-96-5

Critério

Other each

Valor

val1

Unidade

Número CAS

Critério

Other total

Valor

val1

Unidade

Número CAS

Critério

Valor

val1

Unidade

Número CAS

7440-21-3

Critério

Valor

val1

Unidade

Número CAS

7440-32-6

Critério

Valor

val1

Unidade

Número CAS

7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Precisa de dados completos de desempenho de materiais?

AA 6061 Propriedades físicas

Temperatura

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propriedade / Valor

Módulo de elasticidade

val1 GPa

Desbloqueie todas as informações

Condutividade térmica

val1 W/(m∙°C)

Desbloqueie todas as informações

Resistividade Elétrica

val1 Ω∙mm²/m

Desbloqueie todas as informações

Densidade

val1 kg/dm³

Desbloqueie todas as informações

Condutividade elétrica

val1 S/m

Desbloqueie todas as informações

Capacidade térmica

val1 J/(kg∙°C)

Desbloqueie todas as informações

Temperatura de fusão

val1 °C

Desbloqueie todas as informações

Coeficiente de Poisson (v)

val1

Desbloqueie todas as informações

Coeficiente de Expansão Térmica (CTE)

val1 10^-6/°C

Desbloqueie todas as informações

Este material conta com 2958 propriedades — apenas uma parte está sendo exibida aqui.

Desbloquear valores físicos específicos em diferentes temperaturas e condições.

AA 6061 Tratamento Térmico

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

For sheet

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For plate

Temper T4 (applies only to tread plate): Solution heat treated at 530°C, quenched, naturally aged.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6 (applies only to tread plate): Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For rolled or cold finished wire, rod and bar

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T3: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T89: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T913: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T94: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For extruded rod, bar, profiles and tube

Temper T1: Quenched directly from the extrusion press, naturally aged. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4510: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4511: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T51: Quenched directly from the extrusion press, precipitation heat treated at 175°C for 8 hours. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6510: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6511: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours.

For structural profiles

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For drawn pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For die and hand forgings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

For rolled rings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T452: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

Temper T652: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove effects of solution heat treatment and include cooling at a rate of about 30°C per hour from the annealing temperature to 260°C. The rate of subsequent cooling is unimportant. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 6061 Propriedades mecânicas

Temperatura

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propriedade / Valor

Resistência à tração

105 — 328.5 MPa

Desbloqueie todas as informações

Dureza (HB)

val1

Desbloqueie todas as informações

Alongamento, A

val1 %

Desbloqueie todas as informações

Limite de escoamento, Rp0.2

val1 MPa

Desbloqueie todas as informações

Energia de impacto

val1 J

Desbloqueie todas as informações

Redução de Área

val1 %

Desbloqueie todas as informações

Dureza Vickers (HV)

val1

Desbloqueie todas as informações

Precisa de propriedades mecânicas completas para fazer a escolha certa?

Acesse dados detalhados de resistência, dureza, fadiga e muito mais.

AA 6061 Materiais Equivalentes Internacionais

Exibindo 15 de 264 resultados.

MATERIAL

NORMA

País / Produtor

Categoria de equivalência

MATERIAL

A96061

NORMA

UNS

País / Produtor

Estados Unidos

Categoria de equivalência

Oficial

MATERIAL

1330

NORMA

GOST

País / Produtor

Rússia

Categoria de equivalência

Oficial

MATERIAL

1340

NORMA

GOST

País / Produtor

Rússia

Categoria de equivalência

Oficial

MATERIAL

A 6061 FD

NORMA

JIS

País / Produtor

Japão

Categoria de equivalência

Oficial

MATERIAL

AB 6061

NORMA

ABS

País / Produtor

Estados Unidos

Categoria de equivalência

Oficial

MATERIAL

AD33

NORMA

GOST

País / Produtor

Rússia

Categoria de equivalência

Oficial

MATERIAL

NORMA

GOST

País / Produtor

Rússia

Categoria de equivalência

Oficial

MATERIAL

65032

NORMA

País / Produtor

Índia

Categoria de equivalência

Oficial

MATERIAL

6061

NORMA

ISO

País / Produtor

Internacional

Categoria de equivalência

Oficial

MATERIAL

A 6061 FH

NORMA

JIS

País / Produtor

Japão

Categoria de equivalência

Oficial

MATERIAL

A 6061P

NORMA

JIS

País / Produtor

Japão

Categoria de equivalência

Oficial

MATERIAL

A 6061 BE

NORMA

JIS

País / Produtor

Japão

Categoria de equivalência

Oficial

MATERIAL

AlMg1SiCu

NORMA

ISO

País / Produtor

Internacional

Categoria de equivalência

Oficial

MATERIAL

A 6061T

NORMA

JIS

País / Produtor

Japão

Categoria de equivalência

Oficial

MATERIAL

L-3420

NORMA

UNE

País / Produtor

Espanha

Categoria de equivalência

Oficial

As categorias de equivalência refletem a comparação da composição química e das propriedades mecânicas, sempre verifique a adequação do material em relação à especificação aplicável à sua aplicação.

Precisa da lista completa do 264 de equivalentes internacionais?

Veja todos as classes 264 equivalentes com mapeamento detalhado por norma, fabricante e categoria de equivalência.

Otimizar seleção de materiais para sua aplicação - Agende uma demonstração

Quer comparar materiais e tomar decisões mais assertivas?

Acesse dados confiáveis, avalie diferentes opções de materiais e decida com mais rapidez e segurança.

Com a Total Materia, você pode:

Comparar materiais com base em dados reais de engenharia

Identificar equivalentes entre diferentes normas e padrões

Avaliar o desempenho de acordo com suas condições específicas

Verificar conformidade com regulamentações globais

Veja como isso se aplica à sua necessidade específica.

Fazer um Tour Guiado

264Referências Cruzadas

22Composição
1237Propriedades Mecânicas
307Propriedades físicas
5Tratamento térmico
15Metalografia
1Usinabilidade

304Tensão-Deformação
14Conformabilidade
168Fadiga
10Fratura
20Rastejante

46Junta
-Revestimentos
-Dimensões
5Tribologia

39Corrosão
391Envelhecimento
-Resistência às Intempéries
13Irradiação

97Total de Fornecedores