AA 6061 Alüminyum alaşım

Malzeme grubu: Demirdışı Alaşımlar / Alüminyum alaşım

Ülke/Standart: Amerika Birleşik Devletleri / AA

Belirleyici fiyat:

Veri güncellemeleri

Son Güncelleme: 2025-09

Toplam güncelleme sayısı: 7

Güncelleme Geçmişi

2025-08 2022-11 2020-09 2020-07 2019-05 2016-02

Bu malzemenin 2958 özelliği vardır - burada yalnızca bir alt kümesi gösterilmektedir.

Sıcaklıklar ve koşullar genelinde ayrıntılı değerler de dahil olmak üzere tam malzeme özelliklerinin kilidini açın.

AA 6061 Kimyasal bileşim

Kriterler

Değer

Birim

CAS numarası

Kriterler

Değer

Remainder

Birim

CAS numarası

7429-90-5

Kriterler

Değer

0.04 – 0.35

Birim

CAS numarası

7440-47-3

Kriterler

Değer

0.15 – 0.40

Birim

CAS numarası

7440-50-8

Kriterler

Değer

val1

Birim

CAS numarası

7439-89-6

Kriterler

Değer

val1

Birim

CAS numarası

7439-95-4

Kriterler

Değer

val1

Birim

CAS numarası

7439-96-5

Kriterler

Other each

Değer

val1

Birim

CAS numarası

Kriterler

Other total

Değer

val1

Birim

CAS numarası

Kriterler

Değer

val1

Birim

CAS numarası

7440-21-3

Kriterler

Değer

val1

Birim

CAS numarası

7440-32-6

Kriterler

Değer

val1

Birim

CAS numarası

7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Tam malzeme performans verilerini mi arıyorsunuz?

AA 6061 Fiziksel özellikler

Sıcaklık

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Özellik / Değer

Elastisite Modülü

val1 GPa

Tüm ayrıntıların kilidini açın

Isıl İletkenlik

val1 W/(m∙°C)

Tüm ayrıntıların kilidini açın

Elektriksel Direnç

val1 Ω∙mm²/m

Tüm ayrıntıların kilidini açın

Yoğunluk

val1 kg/dm³

Tüm ayrıntıların kilidini açın

Elektriksel İletkenlik

val1 S/m

Tüm ayrıntıların kilidini açın

Isı Kapasitesi

val1 J/(kg∙°C)

Tüm ayrıntıların kilidini açın

Ergime Sıcaklığı

val1 °C

Tüm ayrıntıların kilidini açın

Poisson Katsayısı

val1

Tüm ayrıntıların kilidini açın

Isıl Genleşme Katsayısı (CTE)

val1 10^-6/°C

Tüm ayrıntıların kilidini açın

Bu malzemenin 2958 özelliği vardır - burada yalnızca bir alt kümesi gösterilmektedir.

Sıcaklık ve koşullar genelinde ayrıntılı fiziksel özellik değerlerinin kilidini açın.

AA 6061 Isıl İşlem

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

For sheet

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For plate

Temper T4 (applies only to tread plate): Solution heat treated at 530°C, quenched, naturally aged.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6 (applies only to tread plate): Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For rolled or cold finished wire, rod and bar

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T3: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T89: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T913: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T94: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For extruded rod, bar, profiles and tube

Temper T1: Quenched directly from the extrusion press, naturally aged. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4510: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4511: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T51: Quenched directly from the extrusion press, precipitation heat treated at 175°C for 8 hours. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6510: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6511: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours.

For structural profiles

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For drawn pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For die and hand forgings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

For rolled rings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T452: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

Temper T652: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove effects of solution heat treatment and include cooling at a rate of about 30°C per hour from the annealing temperature to 260°C. The rate of subsequent cooling is unimportant. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 6061 Mekanik özellikler

Sıcaklık

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Özellik / Değer

Çekme Gerilimi

105 — 328.5 MPa

Tüm ayrıntıların kilidini açın

Brinell Sertliği (HB)

val1

Tüm ayrıntıların kilidini açın

Uzama, A

val1 %

Tüm ayrıntıların kilidini açın

Akma Dayanımı, Rp0.2

val1 MPa

Tüm ayrıntıların kilidini açın

Darbe Enerjisi

val1 J

Tüm ayrıntıların kilidini açın

Kesit Daralması

val1 %

Tüm ayrıntıların kilidini açın

Vickers Sertliği (HV)

val1

Tüm ayrıntıların kilidini açın

Doğru seçimi yapmak için eksiksiz mekanik özelliklere mi ihtiyacınız var?

Mukavemet, sertlik, yorulma ve daha fazlası hakkında eksiksiz verilere ulaşın.

AA 6061 Uluslararası eşdeğer malzemeler

264 sonuçtan 15 tanesi gösteriliyor.

Malzeme

Standart

Ülke / Üretici

Denklik Kategorisi

Malzeme

A96061

Standart

UNS

Ülke / Üretici

Amerika Birleşik Devletleri

Denklik Kategorisi

Resmi

Malzeme

1330

Standart

GOST

Ülke / Üretici

Rusya

Denklik Kategorisi

Resmi

Malzeme

1340

Standart

GOST

Ülke / Üretici

Rusya

Denklik Kategorisi

Resmi

Malzeme

A 6061 FD

Standart

JIS

Ülke / Üretici

Japonya

Denklik Kategorisi

Resmi

Malzeme

AB 6061

Standart

ABS

Ülke / Üretici

Amerika Birleşik Devletleri

Denklik Kategorisi

Resmi

Malzeme

AD33

Standart

GOST

Ülke / Üretici

Rusya

Denklik Kategorisi

Resmi

Malzeme

Standart

GOST

Ülke / Üretici

Rusya

Denklik Kategorisi

Resmi

Malzeme

65032

Standart

Ülke / Üretici

Hindistan

Denklik Kategorisi

Resmi

Malzeme

6061

Standart

ISO

Ülke / Üretici

Uluslararası

Denklik Kategorisi

Resmi

Malzeme

A 6061 FH

Standart

JIS

Ülke / Üretici

Japonya

Denklik Kategorisi

Resmi

Malzeme

A 6061P

Standart

JIS

Ülke / Üretici

Japonya

Denklik Kategorisi

Resmi

Malzeme

A 6061 BE

Standart

JIS

Ülke / Üretici

Japonya

Denklik Kategorisi

Resmi

Malzeme

AlMg1SiCu

Standart

ISO

Ülke / Üretici

Uluslararası

Denklik Kategorisi

Resmi

Malzeme

A 6061T

Standart

JIS

Ülke / Üretici

Japonya

Denklik Kategorisi

Resmi

Malzeme

L-3420

Standart

UNE

Ülke / Üretici

İspanya

Denklik Kategorisi

Resmi

Eşdeğerlik kategorileri, kimyasal bileşim ve mekanik özellik karşılaştırmalarını gösterir — uygulamanız için geçerli şartnameye göre uygunluğunu her zaman doğrulayın.

264 uluslararası eşdeğerin tam listesine mi ihtiyacınız var?

Standart, üretici ve eşdeğerlik kategorisine göre ayrıntılı eşleştirmeler ile tüm 264 eşdeğer kaliteleri görün.

Uygulamanız için en uygun olan malzeme seçiminizi optimize edin - Demo Rezervasyonu Yapın

Malzemeleri karşılaştırmak ve daha iyi kararlar almak mı istiyorsunuz?

Güvenilir malzeme verilerine erişin, seçenekleri karşılaştırın ve daha hızlı bir şekilde daha iyi kararlar alın.

Total Materia ile şunları yapabilirsiniz:

Gerçek mühendislik verilerine dayalı malzemeleri karşılaştırın

Standartlar arasında eşdeğer malzemeleri bulun

Belirli koşullarınız için performansı değerlendirin

Ulusal düzenlemelere uygunluğu kontrol edin

Belirli uygulamalarınız için nasıl çalıştığını görün

Rehberli Tura Katılın

264Çapraz Referanslar

22Bileşim
1237Mekanik Özellikler
307Fiziksel Özellikler
5Isıl İşlem
15Metalografi
1İşlenebilirlik

304Gerilme-Gerinim
14Şekillendirilebilirlik
168Yorulma
10Kırılma
20Sürünmek

46Bağlantılar
-Kaplamalar
-Boyutlar
5Triboloji

39Korozyon
391Yaşlanma
-Hava şartlarına dayanıklılık
13Radyasyon etkisi

97Toplam Tedarikçiler