AA 6061 Aluminiumlegierungen

Materialgruppe: Nichteisenlegierungen / Aluminiumlegierungen

Land/Norm: Vereinigte Staaten / AA

Richtpreis:

Datenaktualisierungen

Neueste Aktualisierung: 2025-09

Gesamtzahl der Aktualisierungen: 7

Aktualisierungsverlauf

2025-08 2022-11 2020-09 2020-07 2019-05 2016-02

Dieser Werkstoff verfügt über 2958 Eigenschaften – hier wird nur ein Teil davon angezeigt.

Erhalten Sie Zugriff auf alle Werkstoffeigenschaften, einschließlich detaillierter Werte für verschiedene Temperaturen und Zustände.

AA 6061 Chemische Zusammensetzung

Kriterien

Wert

Einheit

CAS Nummer

Kriterien

Wert

Rest

Einheit

CAS Nummer

7429-90-5

Kriterien

Wert

0.04 – 0.35

Einheit

CAS Nummer

7440-47-3

Kriterien

Wert

0.15 – 0.40

Einheit

CAS Nummer

7440-50-8

Kriterien

Wert

val1

Einheit

CAS Nummer

7439-89-6

Kriterien

Wert

val1

Einheit

CAS Nummer

7439-95-4

Kriterien

Wert

val1

Einheit

CAS Nummer

7439-96-5

Kriterien

Other each

Wert

val1

Einheit

CAS Nummer

Kriterien

Other total

Wert

val1

Einheit

CAS Nummer

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-21-3

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-32-6

Kriterien

Wert

val1

Einheit

CAS Nummer

7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Suchen Sie nach vollständigen Daten für Werkstoffe?

AA 6061 Physikalische Eigenschaften

Temperatur

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Eigenschaft / Wert

Elastizitätsmodul

val1 GPa

Alle Details anzeigen

Wärmeleitfähigkeit

val1 W/(m∙°C)

Alle Details anzeigen

Elektrischer Widerstand

val1 Ω∙mm²/m

Alle Details anzeigen

Dichte

val1 kg/dm³

Alle Details anzeigen

Elektrische Leitfähigkeit

val1 S/m

Alle Details anzeigen

Wärmekapazität

val1 J/(kg∙°C)

Alle Details anzeigen

Schmelztemperatur

val1 °C

Alle Details anzeigen

Poissonzahl

val1

Alle Details anzeigen

Wärmeausdehnungskoeffizient (CTE)

val1 10^-6/°C

Alle Details anzeigen

Dieser Werkstoff verfügt über 2958 Eigenschaften – hier wird nur ein Teil davon angezeigt.

Erhalten Sie detaillierte physikalische Werte für verschiedene Temperaturen und Bedingungen.

AA 6061 Wärmebehandlung

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

For sheet

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For plate

Temper T4 (applies only to tread plate): Solution heat treated at 530°C, quenched, naturally aged.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6 (applies only to tread plate): Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.

For rolled or cold finished wire, rod and bar

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T3: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T89: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T913: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T94: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used. Cold work subsequent to precipitation heat treatment is required to attain the specified mechanical properties for this temper.

Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 8 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For extruded rod, bar, profiles and tube

Temper T1: Quenched directly from the extrusion press, naturally aged. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4510: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T4511: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T51: Quenched directly from the extrusion press, precipitation heat treated at 175°C for 8 hours. Some extrusions may be adequately quenched using a room temperature air blast.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6510: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6511: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours.

For structural profiles

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C for 8 hours. By suitable control of extrusion temperature, product may be quenched directly from extrusion press to provide specified properties for this temper. Some products may be adequately quenched in air blast at room temperature.

For drawn pipe

Temper T4: Solution heat treated at 530°C, quenched, naturally aged.

Temper T42: Solution heat treated at 530°C, quenched, naturally aged.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C, for 18 hours. An alternative treatment comprised of 8 hours at 170°C also may be used.

For die and hand forgings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

For rolled rings

Temper T4: Solution heat treated at 530°C, quenched, naturally aged. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T452: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours.

Temper T652: Solution heat treated at 530°C, quenched, precipitation heat treated at 175°C, for 8 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove effects of solution heat treatment and include cooling at a rate of about 30°C per hour from the annealing temperature to 260°C. The rate of subsequent cooling is unimportant. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 6061 Mechanische Eigenschaften

Temperatur

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Eigenschaft / Wert

Zugfestigkeit

105 — 328.5 MPa

Alle Details anzeigen

Brinell-Härte (HB)

val1

Alle Details anzeigen

Dehnung, A

val1 %

Alle Details anzeigen

Streckgrenze, Rp0.2

val1 MPa

Alle Details anzeigen

Aufprall-Energie

val1 J

Alle Details anzeigen

Brucheinschnürung

val1 %

Alle Details anzeigen

Vickers Härte (HV)

val1

Alle Details anzeigen

Benötigen Sie vollständige mechanische Eigenschaften, um die richtige Wahl zu treffen?

Erhalten Sie vollständige Daten zu Festigkeit, Härte, Ermüdung und mehr.

AA 6061 Internationale Werkstoffäquivalente

Anzeige von 15 von 264 Ergebnissen.

WERKSTOFF

NORM

LAND / HERSTELLER

ÄQUIVALENZKATEGORIE

WERKSTOFF

A96061

NORM

UNS

LAND / HERSTELLER

Vereinigte Staaten

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

1330

NORM

GOST

LAND / HERSTELLER

Russland

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

1340

NORM

GOST

LAND / HERSTELLER

Russland

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 6061 FD

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

AB 6061

NORM

ABS

LAND / HERSTELLER

Vereinigte Staaten

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

AD33

NORM

GOST

LAND / HERSTELLER

Russland

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

NORM

GOST

LAND / HERSTELLER

Russland

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

65032

NORM

LAND / HERSTELLER

Indien

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

6061

NORM

ISO

LAND / HERSTELLER

International

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 6061 FH

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 6061P

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 6061 BE

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

AlMg1SiCu

NORM

ISO

LAND / HERSTELLER

International

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

A 6061T

NORM

JIS

LAND / HERSTELLER

Japan

ÄQUIVALENZKATEGORIE

Offiziell

WERKSTOFF

L-3420

NORM

UNE

LAND / HERSTELLER

Spanien

ÄQUIVALENZKATEGORIE

Offiziell

Die Äquivalenzkategorien basieren auf dem Vergleich der chemischen Zusammensetzung und der mechanischen Eigenschaften – prüfen Sie stets die Eignung anhand der für Ihre Anwendung geltenden Spezifikation.

Benötigen Sie die vollständige Liste der 264 internationalen Äquivalente?

Sehen Sie alle 264 äquivalenten Werkstoffgüten mit detaillierter Zuordnung nach Norm, Hersteller und Äquivalenzkategorie.

Optimieren Sie die Materialauswahl für Ihre Anwendung - Demo vereinbaren

Möchten Sie Werkstoffe vergleichen und fundiertere Entscheidungen treffen?

Greifen Sie auf zuverlässige Werkstoffdaten zu, vergleichen Sie Optionen und treffen Sie schneller bessere Entscheidungen.

Mit Total Materia können Sie:

Werkstoffe anhand realer technischer Daten vergleichen

Äquivalente Werkstoffe über verschiedene Normen hinweg finden

Die Leistungsfähigkeit unter Ihren spezifischen Bedingungen bewerten

Die Einhaltung globaler Vorschriften überprüfen

Erfahren Sie, wie dies für Ihre spezifische Anwendung funktioniert

Geführte Tour starten

264Querverweise

22Zusammensetzung
1237Mechanische Eigenschaften
307Physikalische Eigenschaften
5Wärmebehandlung
15Metallographie
1Zerspanbarkeit

304Spannung-Dehnung
14Umformbarkeit
168Ermüdung
10Fraktur
20Schleicher

46Verbindungen
-Beschichtungen
-Abmessungen
5Tribologie

39Korrosion
391Alterung
-Witterungsbeständigkeit
13Bestrahlung

97Gesamtzahl der Lieferanten