UNE 31 CrMo 12 Structural and constructional steels
Data updates
This material has 400 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
UNE 31 CrMo 12 Chemical Composition
UNE 36014 / Wrought nitriding steels
Looking for full material performance data?
Free registration required • Instant access
UNE 31 CrMo 12 Physical Properties
Temperature
This material has 400 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
UNE 31 CrMo 12 Heat Treatments
- Soft annealing: 650-700°C; Hardening: 870-930°C (0,5 h minimum), oil or water cooling; Tempering: 580-700°C (1 h minimum); Nitriding: 480-570°C.
- The base composition and the heat treatment (quenching and tempering) prior to nitriding both have an influence on the results of nitriding treatment. The tempering temperature should not be less than 50°C higher than the nitriding temperature. A difference of less than 50°C should be the subject of a special agreement.
Soft annealing at 650-700°C;
Hardening at 870-930°C (time for austenitizing as a guide: 0.5h minimum) and quenching in oil or water;
Tempering at 580-700°C (time for tempering as a guide: 1h minimum; With very large sizes, the tempering temperature may be agreed at the time of enquiry and order).;
Nitriding at 490-570°C (time for nitriding depends on the desired depth of the nitrided case).
UNE 31 CrMo 12 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
UNE 31 CrMo 12 International Equivalent Materials
Showing 15 of 188 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 188 international equivalents?
See all 188 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 188Cross References
- 23Composition
- 40Mechanical Properties
- 4Physical Properties
- 8Heat Treatment
- 4Metallography
- -Machinability
- -Stress-Strain
- -Formability
- 5Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 128Total Suppliers