SAE Ti-10V-2Fe-3Al Alliages de titane
Mises à jour des données
Ce matériau a 4475 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
SAE Ti-10V-2Fe-3Al Composition chimique
SAE AMS 4983G: 2019 / Alliage de titane, Pièces forgées 10V - 2Fe - 3Al Fondu à l’électrode consommable, Traité thermiquement par mise en solution et vieilli en une seule étape Résistance à la traction de 180 ksi (1241 MPa)
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
SAE Ti-10V-2Fe-3Al Propriétés physiques
Température
Ce matériau a 4475 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
SAE Ti-10V-2Fe-3Al Traitement thermique
- Solution Heat Treatment
Forgings shall be heated to a temperature 60 to 100°F (33 to 56°C) below the beta transus, held at heat for not less than 30 minutes, and quenched in water, unless a double solution heat treatment is specified by purchaser. In that case forgings shall be also heated to a temperature 60 to 100°F (33 to 56°C) below the beta transus, held at heat for not less than 30 minutes, and either furnace cooled or air cooled to room temperature.
Aging heat treatment: heat to a temperature within the range 900 to 975°F (482 to 524°C), hold at the selected temperature within ±10 °F (±6°C) for not less than 8 hours, and cool to room temperature.
Beta Transus Determination:
The beta transus temperature shall be determined by metallography, differential thermal analyzer, calculated from chemical composition of the alloy, or any method acceptable to purchaser. Thermal controls and readouts shall be calibrated to an accuracy of ±5°F (±3°C). - Solution Heat Treatment
Forgings shall be single solution heat treated by heating to a temperature 60 to 100°F (33 to 55°C) degrees below the beta transus, holding at heat for not less than 30 minutes, and cooling at a rate equivalent to an air cool or faster.
Beta Transus Determination
The beta transus temperature shall be determined by metallography, differential thermal analyzer, calculated from the chemical composition of the alloy, or a method acceptable to purchaser Thermal controls and readouts shall be calibrated to an accuracy of ±5°F (±3°C).
Aging
Heat to a temperature not lower than 900°F (482°C), hold at the selected temperature within ±10°F (±6°C) for not less than 8 hours, and cool to room temperature.
SAE Ti-10V-2Fe-3Al Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
SAE Ti-10V-2Fe-3Al Matériaux équivalents internationaux
Affichage de 8 sur 32 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 32 équivalents internationaux ?
Consultez les 32 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 32Références croisées
- 44Composition
- 51Propriétés mécaniques
- 10Propriétés physiques
- 6Traitement thermique
- -Métallographie
- -Usinabilité
- 26Contrainte-Déformation
- -Formabilité
- 7Fatigue
- 4Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- 4283Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 12Fournisseurs totaux