AA 7075 Alliage d'aluminium

Groupe de matériaux: Alliages Non-Ferreux / Alliage d'aluminium

Pays/Norme: États-Unis / AA

Prix indicatif:

Mises à jour des données

Dernière mise à jour: 2025-09

Nombre total de mises à jour: 22

Historique des mises à jour

2025-08 2025-05 2024-10 2024-04 2024-03 2024-02 2024-01 2023-12 2023-03 2022-08 2020-10 2020-09 2020-08 2020-07 2019-06 2019-05 2016-11 2016-02 2015-03 2015-01 2014-06

Ce matériau a 2931 entrées de propriétés – seul un aperçu est visible ici.

Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.

AA 7075 Composition chimique

Critère

Valeur

Unité

Numéro CAS

Critère

Valeur

Restant

Unité

Numéro CAS

7429-90-5

Critère

Valeur

0.18 – 0.28

Unité

Numéro CAS

7440-47-3

Critère

Valeur

1.2 – 2.0

Unité

Numéro CAS

7440-50-8

Critère

Valeur

val1

Unité

Numéro CAS

7439-89-6

Critère

Valeur

val1

Unité

Numéro CAS

7439-95-4

Critère

Valeur

val1

Unité

Numéro CAS

7439-96-5

Critère

Other each

Valeur

val1

Unité

Numéro CAS

Critère

Other total

Valeur

val1

Unité

Numéro CAS

Critère

Valeur

val1

Unité

Numéro CAS

7440-21-3

Critère

Valeur

val1

Unité

Numéro CAS

7440-32-6

Critère

Ti+Zr

Valeur

val1

Unité

Numéro CAS

Critère

Valeur

val1

Unité

Numéro CAS

7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Vous souhaitez voir toutes les données sur ce matériau ?

AA 7075 Propriétés physiques

Température

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propriété / Valeur

Module d’élasticité

69 — 79 GPa

Déverrouiller l’accès aux données détaillées

Densité

val1 kg/dm³

Déverrouiller l’accès aux données détaillées

Capacité thermique

val1 J/(kg∙°C)

Déverrouiller l’accès aux données détaillées

Conductivité thermique

val1 W/(m∙°C)

Déverrouiller l’accès aux données détaillées

Résistivité

val1 Ω∙mm²/m

Déverrouiller l’accès aux données détaillées

Conductivité électrique

val1 S/m

Déverrouiller l’accès aux données détaillées

Température de fusion

val1 °C

Déverrouiller l’accès aux données détaillées

Coefficient de Poisson

val1

Déverrouiller l’accès aux données détaillées

Module de cisaillement

val1 GPa

Déverrouiller l’accès aux données détaillées

Coefficient de dilatation thermique (CTE)

val1 10^-6/°C

Déverrouiller l’accès aux données détaillées

Ce matériau a 2931 entrées de propriétés – seul un aperçu est visible ici.

Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.

AA 7075 Traitement thermique

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

The aging of aluminum alloy 7075 from any temper to the T73 or T76 temper series requires closer than normal controls on aging practice variables such as time, temperature, heating-up rates, etc., for any given item. In addition to the above, when re-aging material in the T6 temper series to the T73 or T76 temper series, the specific condition of the T6 temper material (such as its property level and other effect of processing variables) is extremely important and will affect the capability of the re-aged material to conform to the requirements specified for the applicable T73 or T76 temper series.

For sheet

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable.

Temper W: Solution heat treated at 480°C, quenched, naturally aged. With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable.

Temper T6: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

Temper T73: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 24-30 hours at 165°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T76: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used.

Temper T62: Solution heat treated at 480°C, quenched, precipitation heat treated ta 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

For plate

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable. For plate thickness over 4 inches and for rod diameters or bar thicknesses over four inches, a maximum temperature of 490°C is recommended to avoid eutectic melting.

Temper W51: Solution heat treated at 480°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W: Solution heat treated at 480°C, quenched, naturally aged.

Temper T651: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7351: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 24-30 hours at 165°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7651: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

For rolled or cold finished wire, rod and bar

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable. For plate thickness over 4 inches and for rod diameters or bar thicknesses over four inches, a maximum temperature of 490°C is recommended to avoid eutectic melting.

Temper W: Solution heat treated at 490°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W51: Solution heat treated at 490°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 490°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T651: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7351: Solution heat treated at 490°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For extruded rod, bar and profiles

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper W510: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W511: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T76: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T6510: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T76510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T6511: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T76511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For extruded tube

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper W510: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W511: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T6510: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T6511: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For drawn tube

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours.

For die forgings

Temper W: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged.

Temper W52: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment.

Temper T6: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C.

Temper T7352: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

For hand forgings

Temper W: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged.

Temper W52: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment.

Temper T6: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C.

Temper T652: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Temper T7352: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

For rolled rings

Temper W: Solution heat treated at 470°C, quenched, naturally aged.

Temper T6: Solution heat treated at 470°C, quenched, precipitation heat treated at 120°C for 24 hours.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove the effects of solution heat treatment and includes cooling at an uncontrolled rate to 205°C or less, followed by reheating to 230°C for 4 hours. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 7075 Propriétés mécaniques

Température

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propriété / Valeur

Résistance en traction

≥ 230 MPa

Déverrouiller l’accès aux données détaillées

Dureté Brinell (HB)

val1

Déverrouiller l’accès aux données détaillées

Allongement, A

val1 %

Déverrouiller l’accès aux données détaillées

Limite d’élasticité, Rp0.2

val1 MPa

Déverrouiller l’accès aux données détaillées

Énergie d’impact

val1 J

Déverrouiller l’accès aux données détaillées

Striction

val1 %

Déverrouiller l’accès aux données détaillées

Dureté Vickers (HV)

val1

Déverrouiller l’accès aux données détaillées

Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?

Accédez aux données complètes de résistance, dureté, fatigue et plus encore.

AA 7075 Matériaux équivalents internationaux

Affichage de 15 sur 296 résultats.

MATERIAU

NORME

PAYS / PRODUCTEUR

CATÉGORIE D'ÉQUIVALENCE

MATERIAU

AlZnMgCu1,5

NORME

DIN

PAYS / PRODUCTEUR

Allemagne

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

3.4365

NORME

DIN

PAYS / PRODUCTEUR

Allemagne

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

A97075

NORME

UNS

PAYS / PRODUCTEUR

États-Unis

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-7075

NORME

PAYS / PRODUCTEUR

Union Européenne

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-7075

NORME

CSN

PAYS / PRODUCTEUR

République tchèque

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-AlZn5,5MgCu

NORME

CSN

PAYS / PRODUCTEUR

République tchèque

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-7075

NORME

DIN

PAYS / PRODUCTEUR

Allemagne

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-AlZn5,5MgCu

NORME

DIN

PAYS / PRODUCTEUR

Allemagne

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-AlZn5,5MgCu

NORME

PAYS / PRODUCTEUR

Union Européenne

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

1950

NORME

GOST

PAYS / PRODUCTEUR

Russie

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

V95

NORME

GOST

PAYS / PRODUCTEUR

Russie

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

AlZn5.5MgCu

NORME

ISO

PAYS / PRODUCTEUR

International

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

7075

NORME

ISO

PAYS / PRODUCTEUR

International

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-7075

NORME

MSZ

PAYS / PRODUCTEUR

Hongrie

CATÉGORIE D'ÉQUIVALENCE

Officiel

MATERIAU

EN AW-AlZn5,5MgCu

NORME

MSZ

PAYS / PRODUCTEUR

Hongrie

CATÉGORIE D'ÉQUIVALENCE

Officiel

Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.

Besoin de la liste complète des 296 équivalents internationaux ?

Consultez les 296 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.

Optimisez les choix de matériaux pour votre application - Réserver une démo

Vous voulez comparer les matériaux pour prendre les bonnes décisions ?

Accédez à des données fiables sur les matériaux, comparez les option et prenez de meilleures décisions plus rapidement.

Avec Total Materia, vous pouvez :

Comparer les matériaux en vous basant sur des données d’ingénierie réelles

Trouver des matériaux équivalents dans différentes normes

Évaluer la performance selon vos conditions spécifiques

Vérifier la conformité aux réglementations du monde entier

Découvrez comment cela fonctionne pour votre application spécifique

Faire une visite guidée

296Références croisées

23Composition
1079Propriétés mécaniques
225Propriétés physiques
8Traitement thermique
35Métallographie
1Usinabilité

349Contrainte-Déformation
21Formabilité
262Fatigue
64Rupture
7Rampant

4Assemblages
-Revêtements
-Dimensions
1Tribologie

14Corrosion
406Vieillissement
-Résistance aux intempéries
2Irradiation

134Fournisseurs totaux