AA 7075 Liga de alumínio

Grupo do Material: Ligas Não Ferrosas / Liga de alumínio

País/Norma: Estados Unidos / AA

Preço indicativo:

Atualizações de dados

Última Atualização: 2025-09

Número total de atualizações: 22

Histórico de Atualizações

2025-08 2025-05 2024-10 2024-04 2024-03 2024-02 2024-01 2023-12 2023-03 2022-08 2020-10 2020-09 2020-08 2020-07 2019-06 2019-05 2016-11 2016-02 2015-03 2015-01 2014-06

Este material conta com 2931 propriedades — apenas uma parte está sendo exibida aqui.

Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.

AA 7075 Composição química

Critério

Valor

Unidade

Número CAS

Critério

Valor

Restante

Unidade

Número CAS

7429-90-5

Critério

Valor

0.18 – 0.28

Unidade

Número CAS

7440-47-3

Critério

Valor

1.2 – 2.0

Unidade

Número CAS

7440-50-8

Critério

Valor

val1

Unidade

Número CAS

7439-89-6

Critério

Valor

val1

Unidade

Número CAS

7439-95-4

Critério

Valor

val1

Unidade

Número CAS

7439-96-5

Critério

Other each

Valor

val1

Unidade

Número CAS

Critério

Other total

Valor

val1

Unidade

Número CAS

Critério

Valor

val1

Unidade

Número CAS

7440-21-3

Critério

Valor

val1

Unidade

Número CAS

7440-32-6

Critério

Ti+Zr

Valor

val1

Unidade

Número CAS

Critério

Valor

val1

Unidade

Número CAS

7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Precisa de dados completos de desempenho de materiais?

AA 7075 Propriedades físicas

Temperatura

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propriedade / Valor

Módulo de elasticidade

69 — 79 GPa

Desbloqueie todas as informações

Densidade

val1 kg/dm³

Desbloqueie todas as informações

Capacidade térmica

val1 J/(kg∙°C)

Desbloqueie todas as informações

Condutividade térmica

val1 W/(m∙°C)

Desbloqueie todas as informações

Resistividade Elétrica

val1 Ω∙mm²/m

Desbloqueie todas as informações

Condutividade elétrica

val1 S/m

Desbloqueie todas as informações

Temperatura de fusão

val1 °C

Desbloqueie todas as informações

Coeficiente de Poisson (v)

val1

Desbloqueie todas as informações

Módulo de cisalhamento

val1 GPa

Desbloqueie todas as informações

Coeficiente de Expansão Térmica (CTE)

val1 10^-6/°C

Desbloqueie todas as informações

Este material conta com 2931 propriedades — apenas uma parte está sendo exibida aqui.

Desbloquear valores físicos específicos em diferentes temperaturas e condições.

AA 7075 Tratamento Térmico

The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

The aging of aluminum alloy 7075 from any temper to the T73 or T76 temper series requires closer than normal controls on aging practice variables such as time, temperature, heating-up rates, etc., for any given item. In addition to the above, when re-aging material in the T6 temper series to the T73 or T76 temper series, the specific condition of the T6 temper material (such as its property level and other effect of processing variables) is extremely important and will affect the capability of the re-aged material to conform to the requirements specified for the applicable T73 or T76 temper series.

For sheet

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable.

Temper W: Solution heat treated at 480°C, quenched, naturally aged. With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable.

Temper T6: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

Temper T73: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 24-30 hours at 165°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T76: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used.

Temper T62: Solution heat treated at 480°C, quenched, precipitation heat treated ta 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

For plate

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable. For plate thickness over 4 inches and for rod diameters or bar thicknesses over four inches, a maximum temperature of 490°C is recommended to avoid eutectic melting.

Temper W51: Solution heat treated at 480°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W: Solution heat treated at 480°C, quenched, naturally aged.

Temper T651: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7351: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 24-30 hours at 165°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7651: Solution heat treated at 480°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T62: Solution heat treated at 480°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate two-stage treatment comprised of 4 hours at 95°C followed by 8 hours at 155°C also may be used.

For rolled or cold finished wire, rod and bar

With optimum ingot homogenization, heat treating temperatures as high as 500°C are sometimes acceptable. For plate thickness over 4 inches and for rod diameters or bar thicknesses over four inches, a maximum temperature of 490°C is recommended to avoid eutectic melting.

Temper W: Solution heat treated at 490°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W51: Solution heat treated at 490°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 490°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T651: Solution heat treated at 490°C, quenched, precipitation heat treated at 120°C for 24 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T7351: Solution heat treated at 490°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For extruded rod, bar and profiles

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper W510: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W511: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T76: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T6510: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T76510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T6511: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T76511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 3-30 hours at 121°C followed by 15-18 hours at 163°C. An alternate two-stage treatment of 8 hours at 99°C followed by 24-28 hours at 163°C may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For extruded tube

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper W510: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper W511: Solution heat treated at 465°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used.

Temper T6510: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73510: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T6511: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours. An alternate three-stage treatment comprised of 5 hours at 100°C followed by 4 hours at 120°C followed by 4 hours at 150°C also may be used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

Temper T73511: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.

For drawn tube

Temper W: Solution heat treated at 465°C, quenched, naturally aged.

Temper T6: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 465°C, quenched, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. An alternate two-stage treatment comprised of 6-8 hours at 107°C followed by a second state of 14-18 hours at 168°C may be used providing a heating up of 14°C per hour is used.

Temper T62: Solution heat treated at 465°C, quenched, precipitation heat treated at 120°C for 24 hours.

For die forgings

Temper W: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged.

Temper W52: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment.

Temper T6: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C.

Temper T7352: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

For hand forgings

Temper W: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged.

Temper W52: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, naturally aged. Stress-relieved by 1-5 percent cold reduction subsequent to solution heat treatment.

Temper T6: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours.

Temper T73: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 8-10 hours at 175°C.

Temper T652: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, precipitation heat treated at 120°C for 24 hours. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

Temper T7352: Solution heat treated at 470°C, quenched in water at 60°C to 80°C, a two-stage treatment comprised of 6 to 8 hours at 105°C followed by a second-stage of 6-8 hours at 175°C. Stress-relieved by 1-5 percent cold reduction prior to precipitation heat treatment.

For rolled rings

Temper W: Solution heat treated at 470°C, quenched, naturally aged.

Temper T6: Solution heat treated at 470°C, quenched, precipitation heat treated at 120°C for 24 hours.

Annealing (O)

Heated at 415°C, held for 2-3 hours. This treatment is intended to remove the effects of solution heat treatment and includes cooling at an uncontrolled rate to 205°C or less, followed by reheating to 230°C for 4 hours. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 7075 Propriedades mecânicas

Temperatura

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

Propriedade / Valor

Resistência à tração

≥ 230 MPa

Desbloqueie todas as informações

Dureza (HB)

val1

Desbloqueie todas as informações

Alongamento, A

val1 %

Desbloqueie todas as informações

Limite de escoamento, Rp0.2

val1 MPa

Desbloqueie todas as informações

Energia de impacto

val1 J

Desbloqueie todas as informações

Redução de Área

val1 %

Desbloqueie todas as informações

Dureza Vickers (HV)

val1

Desbloqueie todas as informações

Precisa de propriedades mecânicas completas para fazer a escolha certa?

Acesse dados detalhados de resistência, dureza, fadiga e muito mais.

AA 7075 Materiais Equivalentes Internacionais

Exibindo 15 de 296 resultados.

MATERIAL

NORMA

País / Produtor

Categoria de equivalência

MATERIAL

AlZnMgCu1,5

NORMA

DIN

País / Produtor

Alemanha

Categoria de equivalência

Oficial

MATERIAL

3.4365

NORMA

DIN

País / Produtor

Alemanha

Categoria de equivalência

Oficial

MATERIAL

A97075

NORMA

UNS

País / Produtor

Estados Unidos

Categoria de equivalência

Oficial

MATERIAL

EN AW-7075

NORMA

País / Produtor

União Europeia

Categoria de equivalência

Oficial

MATERIAL

EN AW-7075

NORMA

CSN

País / Produtor

República Checa

Categoria de equivalência

Oficial

MATERIAL

EN AW-AlZn5,5MgCu

NORMA

CSN

País / Produtor

República Checa

Categoria de equivalência

Oficial

MATERIAL

EN AW-7075

NORMA

DIN

País / Produtor

Alemanha

Categoria de equivalência

Oficial

MATERIAL

EN AW-AlZn5,5MgCu

NORMA

DIN

País / Produtor

Alemanha

Categoria de equivalência

Oficial

MATERIAL

EN AW-AlZn5,5MgCu

NORMA

País / Produtor

União Europeia

Categoria de equivalência

Oficial

MATERIAL

1950

NORMA

GOST

País / Produtor

Rússia

Categoria de equivalência

Oficial

MATERIAL

V95

NORMA

GOST

País / Produtor

Rússia

Categoria de equivalência

Oficial

MATERIAL

AlZn5.5MgCu

NORMA

ISO

País / Produtor

Internacional

Categoria de equivalência

Oficial

MATERIAL

7075

NORMA

ISO

País / Produtor

Internacional

Categoria de equivalência

Oficial

MATERIAL

EN AW-7075

NORMA

MSZ

País / Produtor

Hungria

Categoria de equivalência

Oficial

MATERIAL

EN AW-AlZn5,5MgCu

NORMA

MSZ

País / Produtor

Hungria

Categoria de equivalência

Oficial

As categorias de equivalência refletem a comparação da composição química e das propriedades mecânicas, sempre verifique a adequação do material em relação à especificação aplicável à sua aplicação.

Precisa da lista completa do 296 de equivalentes internacionais?

Veja todos as classes 296 equivalentes com mapeamento detalhado por norma, fabricante e categoria de equivalência.

Otimizar seleção de materiais para sua aplicação - Agende uma demonstração

Quer comparar materiais e tomar decisões mais assertivas?

Acesse dados confiáveis, avalie diferentes opções de materiais e decida com mais rapidez e segurança.

Com a Total Materia, você pode:

Comparar materiais com base em dados reais de engenharia

Identificar equivalentes entre diferentes normas e padrões

Avaliar o desempenho de acordo com suas condições específicas

Verificar conformidade com regulamentações globais

Veja como isso se aplica à sua necessidade específica.

Fazer um Tour Guiado

296Referências Cruzadas

23Composição
1079Propriedades Mecânicas
225Propriedades físicas
8Tratamento térmico
35Metalografia
1Usinabilidade

349Tensão-Deformação
21Conformabilidade
262Fadiga
64Fratura
7Rastejante

4Junta
-Revestimentos
-Dimensões
1Tribologia

14Corrosão
406Envelhecimento
-Resistência às Intempéries
2Irradiação

134Total de Fornecedores